Digitus DS-55129 Bedienungsanleitung

4K/30 Hz HDMI EXTENDER SET

OVER TCP/IP, 100 m

User Manual

DS-55129

Contents

Contents ...................................................................................................................2

Introduction..............................................................................................................2

Features....................................................................................................................3

Package Contents......................................................................................................3

Panel Descriptions.....................................................................................................4

Specifications............................................................................................................6

Power Adapter Information.......................................................................................7

Connection and Operation ........................................................................................8

Connection Diagram..................................................................................................9

Dear Customer

Thank you for purchasing this product. For optimum performance and safety, please

read these instructions carefully before connecting, operating or using this product.

Please keep this manual for future reference.

Introduction

This product is a HDMI Extender based on the TCP/IP technology. With one

CAT5e/6/7/8 cable, it is able to transmit signal from source (up to 4k/30Hz) to display

(up to 4k/30Hz). It can also extend the IR, RS232, USB signals by using the same

Cat5e/6/7/8 cable meanwhile. Besides, the IR function allows controlling the source

from the remote side.

Features

Interface:

Sender: HDMI input x1, RJ45 x1, Line input x1, Line output x1, RS232 x1,

IR output x1, USB 2.0 x1, DC Power Jack x1

Receiver: HDMI output x1, RJ45 x1, Line input x1, Line output x1, RS232 x1,

IR input x1, USB 2.0 x3, DC Power Jack x1

Support TCP/IP

Support HDMI resolution up to 4K/30Hz (RGB 4:4:4)

Transmission distance can be up to 100m with 4K/30Hz

Support cascading through an ethernet switch

Support CAT5e, CAT6, CAT7, CAT8

Support IR remote control

Support RS232 signal bypass

Support HDCP 1.4

Support KVM function (USB 2.0 Extension)

Package Contents

Before attempting to use this unit, please check the packaging and make sure the

following items are contained in the shipping carton:

1x Sender

1x Receiver

2x 24V/0.5A DC Power Adapter

1x IR Sender (IR Extender)

1x IR Receiver (IR Blaster)

2x Phoenix Terminal Male

1x User Manual

4x Installation bracket for wall mounting (Optional)

USB A to USB B cable

Panel Descriptions

1. Sender

①

HDMI In: Connect HDMI source

to this port

②

USB: Connect this port to PC.

③

RS232 port: Connect to a PC or

laptop for RS-232 commands

transmission.

④

IR Out: Connect IR Receiver (Blaster) to

this port for IR signal sending to control

the HDMI source.

⑤

Line In: Connect to audio signal

input.

⑥

Line Out: Connect to audio signal

output.

⑦

LAN: Connect the Sender to the

Receiver via this port with a

Cat5e/6 cable.

⑧

DC 24V: Plug the 24V DC power supply

into the unit and connect the adapter

to an AC outlet.

⑨

Power Switch: Turn on to get

power.

⑩

Power Indicator: The LED will turn on

once the DC/24V is provided.

⑪

Link LED: When LED is “ON”, i t

indicates TCP/IP link connection

established between the Sender

and the Receiver over the

Cat5e/6 cable.

⑫

Video: LED will light up once source is

connected.

⑬

Reset: For system reset.

2. Receiver

①

HDMI Out: Connect HDMI display

to this Port.

②

USB: Connect to keyboard/mouse/U-

disk.

③

RS232 port: Connect to the

device that is to be controlled by

RS-232 commands.

④

IR In: Connect IR Sender (Extender) to

this port for IR signal reception from

the remote control to control the

HDMI source.

⑤

Line In: Connect mic port to this

port.

⑥

Line Out: Connect to the audio device.

⑦

LAN: Connect the Sender to the

Receiver using a Cat5e/6 cable.

⑧

LAN: Connect the Sender to the

Receiver using a Cat5e/6 cable.

⑨

Power Switch: Turn on to get

power.

⑩

Power LED: The LED will turn on once

the DC/24V is provided at the end of

Sender.

⑪

Link LED: When LED is “ON”, i t

indicates TCP/IP link connection

established between the Sender

and the Receiver over the

Cat5e/6 cable.

⑫

Video: LED will light up once source is

connected.

⑬

Reset: For system reset.

Specifications

Signal Input/Output

Sender Connector

HDMI input x1, RJ45 x1

Line input x1, Line output x1

RS232 x1, IR output x1

USB 2.0 x1, DC Power Jack x1

Receiver Connector

HDMI output x1, RJ45 x1

Line input x1, Line output x1

RS232 x1, IR input x1

USB 2.0 x3, DC Power Jack x1

Video format supported

Max Resolution

3840*2160@30Hz, 4096*2160@30Hz

Transmission distance

Cat5e/6 cable

100m for 4Kx2K@30Hz

HDMI cable

5m for 4Kx2K@30Hz

Operating Frequency

HDMI Bandwidth

10.2G

Full frequency band

RS232 Baud Rate

115200bps

Mechanical

Material

Metal

Size (L-W-H)

Sender

168*75*20.5mm

Receiver

168*75*20.5mm

Weight (Net)

Sender

302g

Receiver

300g

Power Requirement

Power Supply

24V DC, 0.5A, 12W

Power consumption (Max)

Sender (6W), Receiver (6W)

ESD Protection

Human Body Model

±8kV (air-gap discharge) &

±4kV (contact discharge)

Environmental

Operating Temperature

0 °C to +45°C

Operating Humidity

10% to 85 % RH (no condensation)

Storage Temperature

-10 °C to +80°C

Storage Humidity

5% to 90 % RH (no condensation)

Power Adapter Information

Information published

Value and precision

Unit

Manufacturer’s name or

trade mark, commercial

registration number and

address

Dongguan Guanjin Electronics Technology Co.,Ltd

Block 16 Qiantou New Industrial Park, Niushan,

Dongcheng District, 523128 Dongguan City,

Guangdong Province

Model identifier

K12V240050G

Input voltage

AC, 100-240V

Input AC frequency

50-60

Output voltage

DC, 12V

Output current

0.5

Output power

Average active efficiency

82.96

Efficiency at low load

(10 %)

No-load power

consumption

0.1

Connection and Operation

1) A) Connect the HDMI source to the HDMI input of Sender.

B) Connect the HDMI output of Receiver to HDMI display.

2) There are two ways of connection:

A) Point to Point connection: Connect the “LAN” of Sender to the “LAN” of

Receiver with a Straight-Through Wired Cable (both ends connected by T568B).

B) Point to Point connection through an Ethernet Switch: Connect the “LAN” of

Sender and the “LAN” of Receiver to the same VLAN group on the ethernet

switch with a Straight-Through Wired Cable (both ends connected by T568B)

Note: VLAN division needs to be performed according to the instructions of the

ethernet switch.

3) Power on the HDMI display and HDMI source.

4) Plug two 24V power adapters into DC power jacks of the Sender and Receiver to

supply power for both. At this time, the “Power” indicator lights up, the “Link”

light and “Video” light are on too. The display signal of the signal source output is

displayed on display device. (Note: The ethernet cable supports up to 100 meters)

5) To achieve KVM function, connect USB port of Sender to PC and connect USB

ports of Receiver to mouse/keyboard through USB cable. Data transmission can

be achieved by connecting U-disk to USB port of Receiver.

6) Connect IR to “IR In” of Receiver and connect IE to “IR Out” of Sender to achieve

remote control.

7) Connect DB9 serial cable to the Phoenix terminal male served (note the order of

TX, RX, GND), then respectively

A) Connect the RS232 port of Sender to RS232 equipped PC.

B) Connect the RS232 port of Receiver to RS232 equipped device.

Note: The baud rate is set to 115200, and the serial device can be connected to

extend the serial information.

8) For remote audio input, connect mic port to “Line in” of Receiver and connect

“Line out” of Sender to audio signal output.

9) For remote audio output, connect audio signal input to “Line in” of Sender and

connect “Line out” of Receiver to the audio device.

Connection Diagram

HDMI Display

DVD (HDMI Source)

Keyboard

Mouse

Microphone

USB Stick

IR Blaster (Sender)/ IR Extender (Receiver)

Amplifier

RS-232 equipped PC

Power Supply

Two kinds of connection (A & B);

Straight-Through Wired Cable (T568B),

Max. 100 m for 4K@30 HZ

Disclaimer:

The product name and brand name may be registered trademark of related

manufacturers. TM and ® may be omitted on the user manual. The pictures on the

user manual are just for reference, and there may be some slight difference with the

real products.

We reserve the rights to make changes without further notice to a product or system

described herein to improve reliability, function or design.

This is a Class A product. In home environment, this product may cause radio

interference. In this case, the user may be required to take appropriate measures.

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part

of the shipping content. If the Declaration of Conformity is missing, you can request it

by post under the below mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Inhaltsverzeichnis

Andere Digitus Extender Handbücher

Digitus

Digitus DS-55100 Bedienungsanleitung

Digitus

Digitus DS-55124 Bedienungsanleitung

Digitus

Digitus DS-55508 Bedienungsanleitung

Digitus

Digitus DS-55504 Bedienungsanleitung

Digitus

Digitus DS-55122 Bedienungsanleitung

Digitus

Digitus DS-51200 Bedienungsanleitung

Digitus

Digitus DA-70141 Bedienungsanleitung

Digitus

Digitus DS-55321 Bedienungsanleitung

Digitus

Digitus DN-95127-1 Bedienungsanleitung

Digitus

Digitus DS-55501 Bedienungsanleitung

Digitus

Digitus DC-51101-LOCAL Bedienungsanleitung

Digitus

Digitus DN-95123 Bedienungsanleitung

Digitus

Digitus DS-55309 Bedienungsanleitung

Digitus

Digitus DS-51201 Bedienungsanleitung

Digitus

Digitus DN-95129 Bedienungsanleitung

Digitus

Digitus DS-55302 Bedienungsanleitung

Digitus

Digitus DS-55306 Bedienungsanleitung

Digitus

Digitus DS-55316 Bedienungsanleitung

Digitus

Digitus DS-55204 Bedienungsanleitung

Digitus

Digitus DS-55500 Bedienungsanleitung

Digitus

Digitus DN-82040 Bedienungsanleitung

Digitus

Digitus DS-55126 Bedienungsanleitung

Digitus

Digitus DN-95126 Bedienungsanleitung

Digitus

Digitus HDBaseT DS-55523 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung