Digitus DN-16100-2 Bedienungsanleitung

H.264 Multi-Profile

1-Channel Video Server

Quick Start Guide

DN-16100-2

About multi-profile

Multi-profile stands for simultaneously video streams. These Network Cameras can generate H.264, MPEG4

and MJPEG streaming simultaneously to different clients. Moreover, the resolution can be different from

one client to another. This state-of-art design is considerable to fit in various network environments.

Before Installation

Before installation, please be sure to read this quick installation guide and user’s manual carefully to

complete machine installation.

1. System Requirements

System Requirement for Viewer & Recorder Application

Support OS Win XP, Vista, 7

FPS

(QVGA)

~120 120~360 360~540 540~960 960~

CPU Intel P4

2.4GHz

Intel P4

3.2GHz

Intel Pentium D

950

3.4GHZ

Intel core 2 Duo

E8600

3.3GHZ

Intel core 2 Quad

Q9650

3.0GHZ

RAM 512MB 512MB 1GB 2GB 2GB

Display support1024x768 resolution or above

Support DirectX 9.0c or above

Intel 945G or Intel 965G or above

Hard disk 60GB (free space)

Ethernet 100Mbps 1Gbps

Chipset Intel 945 or Intel 965 or above

H.264 Multi-Profile 1CH Video Server

Network Environment

Network Interface 10/100MBase-TX Ethernet

Monitoring System Recommended for Internet Explorer 8.0 or later

System Hardware · CPU: Pentium 4, 3.6GHz or higher

· Memory Size : 1GB or more

· VGA card resolution : 1024 x 768 or higher

- Sound card: for 2-way audio function

System Requirement for Viewer & Recorder Application

Support OS Win XP, Win Vista, Win 7, Win 8

System Hardware 16 cameras surveillance application (typical)

· CPU: Intel Core 2 Quad 3GHz or higher

· Memory Size : 2GB or more

· VGA card resolution : 1024 x 768 or higher

2. Physical Installation

2.1 Connections

Front Panel

LAN Socket

The LAN socket is a RJ-45 connector for connections to 10Base-T or 100Base-TX Fast Ethernet

cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission speed of

the network automatically. Please use Category 5 cable to connect the Video Server to a 100Mbps

Fast Ethernet switch or hub.

In the LAN socket, there are two LEDs embedded:

LAN LED (green color)

This LED will be flashing while network accessing via Ethernet.

Power LED (orange color)

This LED is used to indicate whether DC power is on or not.

Video-in Jack (BNC connector)

You can Install 1 video camera and connect it to video-in jack.

DI/DO/RS485 Connector

The Video Server provides a terminal block with 6 pins of connectors for DIDO and RS485. Please

refer to the Appendix A in this manual for more information.

Cable for I/O connectors:

Name Number Function

VDC 1 12V DC output (300mA maximum)

DI 2 Digital signal input

GND 3 GND

DO 4 Digital signal output

485+ 5 RS485 data +

485- 6 RS485 data -

Back Panel

MIC in (audio in)

Connect an external microphone to the Video Server.

Micro SD Card Slot

User can insert a micro SD card into this slot for recording.

Factory Default Reset

This button is hidden in the pinhole. This button is used to restore the all factory default settings.

Sometimes restarting the Video Server will make the system back to a normal state. If the system

still got problems after restart, user can restore the factory default settings and install it again. To

restore the device, please follow the steps below:

(i) Insert the paper clip or any proper tool and press and hold the button down

continuously.

(ii)Hold it at least 5 seconds and release the tool. Then the device has been restored

to default settings and reboot again.

Note: Restoring the factory default setting will lose the all previous settings included IP address

forever. User needs to run the IPWizard II program to search the device and configure it to let the

device work properly again.

Audio/Video Output Jack

Audio/Video-out Jack allows this device to output audio and video signal. Use the attached A/V

cable to connect A/V device where white cable is for audio and yellow cable is for video.

DC Power Jack (12VDC out)

2.1.1 Installation

1. Attach video source to Video Server

To use this video server, user must supply video source to this device first. Typical, user may utilize

box camera, doom camera, bullet camera, P/T/Z camera, Speed doom camera, or others as the

video source. Connect an external camera to the device’s video input and make sure to power on

these cameras first. Otherwise, the operation may be incorrect.

2. Attach external microphone to Video Server (option)

If user needs not only video stream but also audio stream, then an external microphone should be

attached to Video Server. Connect an external microphone to the Video Server’s audio input.

3. Plug an Ethernet cable into Video Server

Connect an Ethernet cable to the LAN socket located on the device’s panel and attach it to the

network.

4. Connect RS485 (option)

When users would like to apply a camera with P/T/Z function, they usually need to connect their

communication port (for camera control) through RS485. After RS-485 was correctly connected to

D+ and D-, the remote users could control the camera movement through Internet.

5. Connect an external power supply to Video Server

Connect an external power supply to the 12VDC power jack of the Video Server. Once you have

installed the Video Server well, the Power LED (orange) will turn on later. It means the system is

booting up successfully. Furthermore, if you have a proper network connection, and access to the

Video Server, the LAN LED (green) will flash.

6. Connect DC power to one external camera from Video Server (option)

In case your Video Server is connected to PoE switch, then this device can provide 12VDC out to

supply one external camera thru 12VDC power jack. Note that the output current is 300mA

maximum.

7. Done

3. Camera administration

When you installed your networked device over your network environment, to start Network

Camera web configuration, you must have the web browsers installed on computer for web

management.

-Microsoft internet Explorer 6.0 or higher

At first, user may use “IP Wizard II” utility to search all networked devices in the LAN.

Use “IP Wizard II” to locate IP address

Press “Search” button. IP Wizard II will list all networked devices in the LAN:

View function:

If IP Wizard II finds network devices, View button will be available. Please select the device you

want to view and click the View button. Furthermore you could double click the left button of

mouse to link to the network device by browser.

3C:49:37:07:01:02

LAN setting function:

The utility featured with “LAN” setting function to help user to modify the IP parameters of the

installed network devices. User can step by step to setup IP address, username and password.

Note 1: If no IP address is assigned within 30 seconds, the networked device will automatically

assign 192.168.0.100. User may now open your web browser, and key in http://192.168.0.100 in

the address bar of you web browser to logon Network Camera’s web configuration page.

Note 2: Power Line Frequency

-If you found the video image is flash, you may need to choose 50 or 60 Hz frequency

(depends on country).

-World wide power line frequency table is inside user’s manual, Appendix

Note 3: If you have problem when connecting the network camera to a router, please read user’s

manual inside CD, the section “Installation to a router”.

After connected to networked device, the device will prompt for User name and Password. For the

first time, please enter: “admin” as username and password: “admin” to continue Web

Management.

If difficulty is met, please refer to the following steps to establish the connection:

-The networked device must be installed and powered ON.

-If the networked device’s default IP Address (192.168.0.100) is already used by another device, the

other device must be turned OFF until the device is allocated a new IP Address during configuration.

Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of

Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive 2011/65/EU for RoHS compliance.

The complete declaration of conformity can be requested by post under the below mentioned manufacturer

address.

Warning:

This device is a class B product. This equipment may cause some radio interference in living environment. In

this case, the user can be requested to undertake appropriate measures to prevent interference.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Inhaltsverzeichnis

Andere Digitus Server Handbücher

Digitus

Digitus DN-13023 Bedienungsanleitung

Digitus

Digitus DN-13007 Bedienungsanleitung

Digitus

Digitus DN-16100 Bedienungsanleitung

Digitus

Digitus DN-13014-3 Bedienungsanleitung

Digitus

Digitus DA-70254 Bedienungsanleitung

Digitus

Digitus DN-13020 Bedienungsanleitung

Digitus

Digitus DN-16100-1 Bedienungsanleitung

Digitus

Digitus DN-70300 Bedienungsanleitung

Digitus

Digitus DN-13010 Bedienungsanleitung

Digitus

Digitus WIRELESS 300N AUTO INSTALLATION USB ADAPTER Bedienungsanleitung

Digitus

Digitus DN-16100-1 Bedienungsanleitung

Digitus

Digitus DN-13014-1 Bedienungsanleitung

Digitus

Digitus DN-13005 Bedienungsanleitung

Digitus

Digitus DN-70230 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung