1. Introduction
Thank you for choosing Aquarius speakers by Dillinger
Labs. You are now the owner of flagship wireless speakers
built with leading edge SKAA wireless technology. SKAA
wireless technology has been invented on the basis of the
following three pillars: Flexibility, Ease of Use, and Pristine
Audio Quality.
We know you are eager to fire up your new speakers and
we don’t want to keep you waiting. Please refer to 3. Quick
Start Guide to have your speakers up and running in no
time. Check out the rest of the manual to find out cool info
about Aquarius and what we have done to set us a part
from the rest.
Few important bytes of information
Have you seen the following icon before?
The SKAA Compatible Badge found on the Product certifies
that this Product has been tested and is fully compliant with
all of the requirements of the SKAA Standard and has been
granted SKAA Certification. This Product will work
seamlessly with other products in the SKAA ecosystem of
audio transmitting and receiving devices. For more
information on the SKAA Standard, please visit
www.SKAA.com. The SKAA® name as well as its associated
marks, logos and icons are trademarks or registered
trademarks of Eleven Engineering Incorporated.
2. Only ONE User Control Element !!!
As depicted in the image below, Aquarius speakers
integrate a single User Interface (UI) Element for the user to
interact with. The UI integrates a Bond Button and built-in
rotary knob for volume control. Keep this info in mind — it
will come in very handy as we traverse through the manual.
3. Quick Start Guide
Step 3: Power up your speaker by pressing the power
switch for two seconds. Aquarius will instantly Bond to
the Transmitter and the Bond Indicator will light bright
amber. You should now hear audio playing.
Step 1: Connect SKAA Transmitter into a phone,
tablet, Mac, or PC. If you use Mac, navigate to System
Preferences >> Sound, and set the output device to
SKAA Transmitter. If you use PC, navigate to Sound
Settings and select SKAA Transmitter as your output
device.
Step 2: Play audio on your device!
Step 4: Adjust audio volume by rotating.
Step 3.1: If the Bond Indicator stays dim amber and
you don’t hear any audio, carry out a factory reset by six
clicking the Bond Button. Six clicks are done in a similar
fashion to a computer mouse.
Bonus: Check out SKAA Wireless Audio Beginner's
Guide video on our YouTube channel !!!
