Dimastech Easy V3.0 Bedienungsanleitung
DimasTech Easy
Version 3.0
ASSEMBLY MANUAL
CONTENTS OF THE KIT
ASSEMBLY DimasTec Easy V.3.0 - FLEX-FAN
- Align VC058 (9) to BT2501 (8)
and fasten wit No.1 screw
VC047_M4x10 (21), as s own
in Figure 1
- Align FAN 120 (item not
included) to BT2501 (8) on
vertical oles and fasten wit
No.2 screws VC050_M2,5x25
(22) plus No.2 knurled nuts
VC034_M2,5 (23), as s own in
figure 2
- It is possible to mount t e FLEX-FAN
in any of t e 6 oles wit M4 t readed
inserts at your disposal according to
t e mot erboard you ave purc ased
or t e preferred c oice, as s own in
t e figure beside. T e image as t e
sole purpose of illustrating t e
possible positions of t e parts.
Note: T e number indicated in t e
brackets indicates t e corresponding
identification in t e table on t e page
No.2
ASSEMBLY DimasTec Easy V.3.0 – STEP-1
- Assemble No.4 VC067_rubber-
feet_M4 (10) into t e dedicated
M4 t readed inserts, located at
t e base of t e
DIMAS_400_C_RF-RB_V.3.0 (1)
body, as s own in t e figure
beside
ASSEMBLY DimasTec Easy V.3.0 – STEP-2
- Unscrew t e No.6 screws
VC048_M3x10 oused bot in
t e front part of t e Dimastec
Easy V.3.0 and in t e back one
and extract t e t ree
preassembled components
BT148 (3), BT149 (4) and BT051-
2013 (5), as s own in t e figure
beside
Note: T e number indicated in t e brackets indicates t e corresponding
identification in t e table on t e page No.2
ASSEMBLY DimasTec Easy V.3.0 – STEP-3
- T e component BT148 (3) as
t e possibility to ouse inside
No.3 optical readers (items not
included), t e image as t e sole
purpose of illustrating t e possible
positions of t e parts.
- Align t e side oles of t e optical
reader wit t e slots of t e
component BT148 (3) and fasten
wit No.4 screws VC049_M3x6
(20) for eac optical reader, as
s own in t e figure beside
ASSEMBLY DimasTec Easy V.3.0 – STEP-4
- T e component BT149 (4) as
t e possibility to ouse inside No.4
ard-disks (items not included),
t e image as t e sole purpose of
illustrating t e possible positions
of t e parts.
- Insert No.16 VC019 (16) into t e
appropriate s aped slots
- Align t e side oles of t e ard
disk wit t e oles of VC019 (16)
and fasten wit No.4 screws
VC014_6-32 (17) for eac ard
disk, as s own in t e figure beside.
Note: T e number indicated in t e brackets indicates t e corresponding
identification in t e table on t e page No.2
ASSEMBLY DimasTec Easy V.3.0 – STEP-5
- T e component BT051-2013 (5)
as t e possibility to ouse inside
No.1 power supply (item not
included), t e image as t e sole
purpose of illustrating t e
possibility positions of t e parts.
- Align t e oles in t e power
supply to t e components of t e
BT051-2013 component (5) and
fasten wit No.4 screws VC066_6-
32 (19), s own in t e figure
beside.
ASSEMBLY DimasTec Easy V.3.0 – STEP-6
- Insert t e components BT148
(3), BT149 (4) and BT051-2013
(5) wit t e respective ardware
installed, inside t e Dimastec
Easy V.3.0 and fasten wit t e
No.6 screws VC048_M3x10
previously extracted, as s own in
t e figure beside.
T e image as t e sole purpose of
illustrating t e possible positions
of t e parts.
Note: T e number indicated in t e brackets indicates t e corresponding
identification in t e table on t e page No.2
ASSEMBLY DimasTec Easy V.3.0 – STEP-7
- Align t e slots at t e base of
t e BT045-2013 component (6)
wit t e slots at t e back of t e
Dimastec Easy V.3.0 and fasten
wit No.2 screws VC047_M4x10
(21) plus No.2 knurled nuts
VC024_M4 (18), as s own in t e
figure beside.
ASSEMBLY DimasTec Easy V.3.0 – STEP-8
- Align t e M3_ inserts of t e
component BT153 (7) wit t e
oles in t e back part of t e
Dimastec Easy V.3.0 and
fasten wit No.2 screws
VC049_M3x6 (20), as s own in
t e figure beside.
Note: T e number indicated in t e brackets indicates t e corresponding
identification in t e table on t e page No.2
ASSEMBLY DimasTec Easy V.3.0 – STEP-9
- T e Dimastec Easy V.3.0 as
t e possibility to mount No.9
spacers VC015_M3_25mm_M-F
(15) in any of t e No.15 M3
t readed oles available to you
according to t e type of
mot erboard you ave purc ased
or to t e arrangement to You
preferred, t e image as t e sole
purpose of illustrating t e possible
positions of t e parts.
- Align t e spacers
VC015_M3_25mm_M-F (15) to t e
corresponding t readed oles M3
of t e Dimastec Easy V.3.0 and
fasten, as s own in t e figure beside.
ASSEMBLY DimasTec Easy V.3.0 – STEP-10
- Align t e oles in t e
mot erboard (item not included)
wit t e spacers
VC015_M3_25mm_M-F (15), and
fasten wit screws VC049_M3x6
(20), as s own in t e figure beside.
T e number of screws to be used
will be t e same as t e spacers
mounted according to t e
mot erboard, t e image as t e
sole purpose of illustrating t e
possible positions of t e parts.
Note: T e number indicated in t e brackets indicates t e corresponding
identification in t e table on t e page No.2
ASSEMBLY DimasTec Easy V.3.0 –
PD001_16mm
– Unscrew t e exagon nut of t e
pus button PD001_16mm (11), as
s own in Figure 1
- Before proceeding wit t e
assembly of t e ardware parts, it
is necessary to extract t e BT148
(3) and BT149 components (4) as
s own in STEP-2 and STEP-5.
- Align No.2 PD001_16mm (11) to t e No.2 orizontal oles in t e front of t e
body DIMAS_400_C_RF-RB_V.3.0 (1) and fasten wit t e previously unscrewed
exagon nuts, as s own in Figure 2
Note: T e number indicated in t e brackets indicates t e corresponding
identification in t e table on t e page No.2
ASSEMBLY DimasTec Easy V.3.0 –
PD001_16mm
For power ON or reset function, connect wit out
polarity yellow cable to "NO1" and ot er Yellow
cable to "C1", t an to use t e pus button
integrated LED, connect t e black cable to "-"
and t e red cable to "+", pus button integrated
LED will work wit PWLED (power on LED) and
HDLED ( ard disk LED), please take care of
polarity, follow "-" and "+" on mot erboard
instruction.
Note: T e number indicated in t e brackets indicates t e corresponding
identification in t e table on t e page No.2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Dimastech Prüfgeräte Handbücher
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung