Dimplex Toluca Deluxe Bedienungsanleitung

INSTRUCTION MANUAL

For domestic household use only.

Toluca Deluxe 2kW Wall-Mounted

Electric Fire

Model: TLC20LX-AU

8/53789/0 Issue 5

OCN 11905

IMPORTANT

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND

RETAINED FOR FUTURE REFERENCE.

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/

OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY

Please read the operating instructions carefully before using your product for

the first time and keep them in a safe place.

• When using electrical appliances, basic precautions should always be

followed to reduce the risk of fire, electrical shock and injury to persons,

including the following:

• If the appliance is damaged, check with the supplier before installation and

operation.

- Do not use outdoors.

- Do not use in the immediate surroundings of a bath, shower or a

swimming pool.

- Do not use this heater if it has been dropped.

- Do not use if there are visible signs of damage to the heater.

- Use this heater on a horizontal and stable surface, or fix it to the

wall, as applicable.

• Do not locate the appliance immediately below a fixed socket outlet or

connection box.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the

appliance.

• Do not use this appliance in series with a thermal control, a program

controller, a timer or any other device that switches on the heat

automatically, since a fire risk exists when the appliance is accidentally

covered or dis-placed.

• In the event of a fault, unplug the appliance.

• Unplug the appliance when not required for long periods.

• This product is only intended for INDOOR RESIDENTIAL applications only.

• DO NOT cover cord with carpeting, throw rugs, runners, or similar coverings.

• DO NOT route cord under furniture or appliances. Take care to position the

cord away from traffic areas and where it will not be a tripping hazard.

• This appliance must not be used in a bathroom.

• Although this appliance complies with safety standards, we do not

recommend its use on deep pile carpets or on long hair type of rugs

• The appliance must be positioned so that the plug is accessible.

• If the supply cord is damaged it must be replaced by the manufacturer or

service agent or a similarly qualified person in order to avoid a hazard.

• Keep the supply cord away from the front of the appliance.

• Do not use this heater in small rooms when they are occupied by persons

not capable of leaving the room on their own, unless constant supervision is

provided.

• To reduce the risk of fire, keep textiles, curtains and or flammable material a

minimum distance of 1m from the air outlet.

• In order to avoid overheating, DO NOT COVER the appliance. Do not place

material or garments on the appliance, or obstruct the air circulation around

the appliance, for instance by curtains or furniture, as this could cause

overheating and a fire risk.

• This Heater carries the warning symbol indicating that it must not

be covered.

• In order to avoid a hazard due to inadvertent resetting of the thermal cut-

out, this appliance must not be supplied through an external switching

device, such as a timer, or connected to a circuit that is regularly switched

on and off by the utility.

• CAUTION Some parts of this product can become very hot and cause

burns. Particular attention has to be given where children and vulnerable

people are present.

• Children shall not turn on/off the appliance.

• Ensure that furniture, curtains or other combustible material are positioned

no closer than 1 metre from the appliance.

• Unplug the appliance when not required for long periods.

• Keep the supply cord away from the front of the appliance.

• This product is only suitable for well insulated rooms or occasional use.

• This heater shall not be located in front of a socket-outlet.

• Do not use this heater with an extension lead or power cord.

WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN

• Swallowing may lead to serious injury in as little as 2 hours or death, due to

chemical burns and potential perforation of the oesophagus.

• If you suspect your child has swallowed or inserted a button battery

immediately call the 24-hour Poisons Information Centre on 13 11 26 (in

Australia) or 0800 764 766 (in New Zealand) for fast, expert advice.

• Examine devices and make sure the battery compartment is correctly secured,

e.g. that the screw or other mechanical fastener is tightened. Do not use if the

compartment is not secure.

• Dispose of used button batteries immediately and safely. Flat batteries can

still be dangerous.

CAUTION: No obvious symptoms

Unfortunately, it is not obvious when a button or coin battery is stuck in a

child's oesophagus (food pipe).

There are no specific symptoms associated with this. The child might:

• cough, gag or drool a lot

• appear to have a stomach upset or virus

• be sick

• point to their throat or stomach

• have a pain in their abdomen, chest or throat

• be tired or lethargic

• be quieter or more clingy than usual or otherwise 'not themselves'

• lose their appetite or have a reduced appetite

• not want to eat solid food/be unable to eat solid food

These types of symptoms vary or fluctuate. with the pain increasing and then

subsiding.

A specific symptom to button and coin battery ingestion is vomiting fresh

(bright red) blood. If the child does this seek immediate help. The lack of clear

symptoms is why it is important to be vigilant with 'flat' or spare button or

coin batteries in the home and the products that contain them.

Exposed to the

weather outdoors

Near water If the power cable

wires are frayed or cut

Where small children

may be left unattended

No extension leads or

power boards

Where there is risk

of fire or close to

a naked flame

Where the power

cable may be

damaged

On a slope or

uneven surface

Where it may be

damaged by

chemicals

If there is a risk

of water falling on

the unit

Where there is a risk

of interference by

foreign objects

This product is not

made for DIY repair

Model no. TLC20LX-AU

Colour/Finish Black

Wattage

2000

Heat Settings

Thermostat Control Y

Remote Control Y

Warranty 2 years

Dimensions (w x d x h) 820 x 155 x 540

Specifications

For greater precision, please always refer to the rating label placed on the product.

Product Dimensions

General Information

The fire incorporates a flame effect, which can be used with or without heat, so that

the comforting effect may be enjoyed at any time of the year.

To reduce heat loss and to prevent any chimney up draft affecting the operation of

your stove fire, we recommend that the chimney flue is sealed off.

Always ensure that the appliance is sitting on a level surface.

Before connecting the appliance, check that the supply voltage is the same as that

stated on the appliance.

Please note: Used in an environment where background noise is very low, it may be

possible to hear a sound which is related to the operation of the fan heater & flame

effect. This is normal and should not be a cause for concern.

Electrical Connection

WARNING: THIS APPLIANCE MUST BE EARTHED

This heater must be used on an AC ~ supply only and the voltage marked on the

heater must correspond to the supply voltage. Before switching on, please read the

safety warnings at the start of the instruction manual and operating instructions to

follow. Please retain this user’s guide for future reference

Light Emitting Diode

This fire is fitted with LED (Light Emitting Diode) bulbs in place of traditional

incandescent bulbs. These generate the same light levels as traditional bulbs, but use

a fraction of the energy consumed. These LED lamps are maintenance free and should

not require replacing during the life of the product.

Thermal Safety Cut-out

A thermal safety cut-out is incorporated in the fan heater to prevent damage due

to overheating. This can happen if the heat outlet was restricted in any way. If the

cut-out operates, unplug the heater from the socket outlet and allow approximately

10 minutes before reconnecting. Before switching the heater back on remove any

obstruction that may be restricting the heat outlet, then continue normal operation.

WARNING: In order to avoid a hazard due to inadvertent resetting of the thermal cut-

out, this appliance must not be supplied through an external switching device, such

as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Setup

Installation

WARNING: FALLING OR TIPPING APPLIANCES CAN CAUSE INJURY OR DEATH OF

YOUNG CHILDREN, PLEASE ENSURE CHILDREN DO NOT CLIMB, HANG OR STAND

ON THIS PRODUCT.

WARNING: THE APPLIANCE IS PROVIDED WITH A WALL FIXING KIT, THIS KIT

IS DESIGNED TO HOLD THE PRODUCTS WEIGHT. IT IS NOT A SUBSTITUTE FOR

PROPER ADULT SUPERVISION. DO NOT ALLOW CHILDREN TO CLIMB OR HANG

ON THIS PRODUCT.

Safety Message: Sufficient expertise is required for installing this product. If unsure

we recommend that you use an installer and pay special attention to safety during

the installation.

Wall Installation

Do not connect the appliance until it is properly fixed to the wall and the instruction

manual/leaflet is completely read and understood. In particular, the minimum dis-

tances must be observed.

This model is designed to be permanently fixed to a wall at a minimum height of

300mm. The wall bracket must be fitted horizontally and the cable routed to the

bottom right of the appliance.

A height of 600mm to 725mm from the bottom of the appliance to the floor is rec-

ommended for optimum viewing of the fuel bed.

For optimum viewing, mark the top three screw fixing positions on the wall in ac-

cordance with the recommended fixing dimensions. Drill holes with a 6mm drill bit.

Fix the wall bracket using the plugs and screws provided. Carefully lift the appliance

up ensuring that the appliance engages with the wall bracket correctly.

A bottom fixing bracket is supplied with the unit, fixed to the base of the appliance.

Remove the screw and the bracket, turn the bracket through 180 degrees so it is

now facing downward and re fit using the screw just removed. With the bracket in

place, mark the location on the wall. Remove the appliance, drill the wall, fit the wall

plug and re-fit the appliance ensuring that you secure it in place by screwing the

bottom fixing bracket to the wall.

Installation

Fuel Bed Media

Acrylic Ice Crystals and White Pebbles are supplied in the box with your fire, allow-

ing you the option of which to place on your fire. To fit the Acrylic Ice Crystals, place

the small Crystals on the fuel bed tray, then place the larger crystals on top of the

small pieces. Arrange the larger pieces to your liking. A suggestion is to place one

large crystal centrally on the fuel bed and the other four positioned symmetrically

around this piece.

The White pebbles are placed on the fuel bed tray until the tray is completely cov-

ered by pebbles to your liking.

Fitting the Front Glass

Your new fire is supplied with the front glass not secured to the engine, this is to

keep the glass safe in transit. To fit the glass to your fire, simply insert the four hang-

ers on the back of the glass through the slots provided on the chassis. The hangers

go in through the slots and then move down to hold the glass in place. The glass can

then be secured in place by inserting the small black screw provided through the

hole in any one of the hangers into the side of the unit.

Wireless Speaker Control

The unit needs to be in standby for the speaker function to operate, you do not

need the flame effect to be operating.

The speaker can be used in 2 ways. You can pair a suitable device to the speaker

wirelessly and listen to music, audio books or casts, or when the flame effect is op-

erating the soothing crackling sound of a log fire can be played for ambient sound

effect.

To listen to the crackling log effect, just press the volume up button on your remote

control until you reach a volume level which is comfortable for you. To lower the

volume, press the volume down button. The crackling is turned OFF by pressing the

volume down button until the sound is muted.

To use the speaker to listen to your own material, the speaker must first be paired to

a compatible device. To pair with the unit:

1. Ensure the unit is plugged in and switched on at the mains socket.

2. Using a compatible device search for "Dimplex Fire," and then select and pair

your device to "Dimplex Fire."

3. Once connection is made between your device and the unit, an electronic tone

will sound to alert you that the pairing was successful.

With the unit now paired, you can control the speaker volume using the volume but-

tons on the remote control handset or your device's volume controls.

Note: If you experience problems pairing to the speaker, you may need to re-pair to

the speaker, follow these steps:

1. On your device go to "Bluetooth Settings."

2. Select "Dimplex Fire," and press "Forget," to disconnect from the speaker.

3. Turn Bluetooth OFF, and then ON. Your device should now rediscover "Dimplex

Fire," again.

4. Select "Dimplex Fire," to pair with the speaker.

Andere Handbücher für Toluca Deluxe

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dimplex Kamin im Innenbereich Handbücher

Dimplex

Dimplex EF3003 Bedienungsanleitung

Dimplex

Dimplex DFI23096A Bedienungsanleitung

Dimplex

Dimplex DWF5252B Bedienungsanleitung

Dimplex

Dimplex Optimyst DFI400LH Bedienungsanleitung

Dimplex

Dimplex EWM-COPPER Bedienungsanleitung

Dimplex

Dimplex BLF5051-AU/PRISM 50" Bedienungsanleitung

Dimplex

Dimplex Prism 50 Bedienungsanleitung

Dimplex

Dimplex Vivente VVT125 Handbuch

Dimplex

Dimplex RANA LED Bedienungsanleitung

Dimplex

Dimplex DF2426 Bedienungsanleitung

Dimplex

Dimplex CHADWICK CDW15XHD Bedienungsanleitung

Dimplex

Dimplex Juneau Optimyst JUN-RGB-EU Bedienungsanleitung

Dimplex

Dimplex LIBERTY SUITE LBY15-AU Bedienungsanleitung

Dimplex

Dimplex 30" FIREPLACE Bedienungsanleitung

Dimplex

Dimplex DWF1215B Bedienungsanleitung

Dimplex

Dimplex MULTIFIRE DF3215 Bedienungsanleitung

Dimplex

Dimplex Atherton ATH20 Bedienungsanleitung

Dimplex

Dimplex BF9000 Bedienungsanleitung

Dimplex

Dimplex 7206560100R00 Installationsanleitung

Dimplex

Dimplex BF362SD Bedienungsanleitung

Dimplex

Dimplex Shaftsbury SHA20 Bedienungsanleitung

Dimplex

Dimplex Revillusion RLG20 EU Bedienungsanleitung

Dimplex

Dimplex ALBANY ABN 15 Bedienungsanleitung

Dimplex

Dimplex OMWFC20 Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch