6
TV Shift functionality
When a TV brand has successfully been programmed into the remote control
with the above steps, the following additional buttons may also control the
TV set. These can be accessed by pressing and holding the TEXT/SHIFT
button 20 on the remote control and at the same time pressing:
Digit buttons 0..9, Left, Right, Up, Down, OK, Channel Up, Channel
Down, the 4 colour keys
Operation of these buttons is not guaranteed to control the normally
expected functionality of the TV set.
Key Fix
If not all the previously mentioned buttons operate the TV set then a KEY
FIX operation can be performed as follows.
1 Press and hold the 1 and 9 buttons simultaneously for
approximately 3 seconds until the TV standby button is lit
2 Try all the above mentioned TV buttons
3 If the TV does not respond to a button, then hold that button down
permanently. The remote control will now step through alternative
settings. When the TV responds correctly then release that button
4 Repeat that procedure for other buttons if necessary
5 Once nished, press TEXT/SHIFT and STOP at the same time.
Removing TV functionality
To reset the remote control and erase the TV functionality
1 Press and hold the 1 and 6 buttons simultaneously for
approximately 3 seconds until the TV standby button is lit
2 Enter the following key sequence in the correct order 9 9 6
3 The TV settings will be deleted from the remote control.
