DirectOut Technologies BREAKOUT Series Montageanleitung

BREAKOUT Series

Hardware Guide

Version 2.0

page 2 of 16 BREAKOUT Series Hardware Guide - Version 2.0

graphic in whole or in part for any reason is expressly prohibited, unless prior written

consent is obtained from the DirectOut GmbH.

All trademarks and registered trademarks belong to their respective owners. It cannot

be guaranteed that all product names, products, trademarks, requisitions, regulations,

guidelines, speciﬁcations and norms are free from trade mark rights of third parties.

All entries in this document have been thoroughly checked; however no guarantee for

correctness can be given.

DirectOut GmbH cannot be held responsible for any misleading or incorrect

information provided throughout this manual.

DirectOut GmbH reserves the right to change speciﬁcations at any time without notice.

DirectOut Technologies® is a registered trademark of the DirectOut GmbH.

page 3 of 16BREAKOUT Series Hardware Guide - Version 2.0

Table of contents

About This Manual 5

How to Use This Manual............................................................................... 5

Conventions .................................................................................................. 5

Chapter 1: Overview 6

Introduction ................................................................................................... 6

Feature Summary.......................................................................................... 7

CHAPTER 2: Legal issues & facts 8

Before Installing This Device......................................................................... 8

Defective Parts/Modules ............................................................................. 8

Intended Operation ...................................................................................... 9

Updates ......................................................................................................... 9

Conditions of Warranty ................................................................................. 9

Conformity & Certiﬁcates ........................................................................... 10

Contact........................................................................................................ 10

Contents ..................................................................................................... 11

Accessories................................................................................................. 11

Chapter 3: Installation 12

Installing the Device ................................................................................... 12

CHAPTER 4: Technical Data 14

Appendix A - DSUB-25 Pin assignment 15

page 4 of 16 BREAKOUT Series Hardware Guide - Version 2.0

This page is left blank intentionally.

page 5 of 16BREAKOUT Series Hardware Guide - Version 2.0

About This Manual

How to Use This Manual

This manual guides you through the installation and operation of the device.

Use the Table of Contents at the beginning of the manual or Index Directory at the

end of the document to locate help on a particular topic. You can access more

information and latest news by visiting on the DirectOut website at

www.directout.eu.

Conventions

The following symbols are used to draw your attention to:

TIPS

indicate useful hints and shortcuts.

NOTES

are used for important points of clariﬁcation or cross references.

WARNINGS!

alert you when an action should always be observed.

page 6 of 16 BREAKOUT Series Hardware Guide - Version 2.0

Chapter 1: Overview

Introduction

The BREAKOUT series is a range of adaptor boxes available in different variants to

extend the coverage of the ANDIAMO and PRODIDGY series. They are equipped

with XLR or BNC connectors on the front panel and DSUB-25 connectors on the

rear panel. Audio signals are carried passively between the front and rear panels.

The small form factor and angle brackets also allow for mounting the devices on

the back of an ANDIAMO or PRODIGY unit.

BREAKOUT.AN8 - analog input / output, 8 channels

Article code: DOBOB0889

BREAKOUT.AN16I - analog input, 16 channels

Article code: DOBOB0890

BREAKOUT.AN16O - analog output, 16 channels

Article code: DOBOB0891

page 7 of 16BREAKOUT Series Hardware Guide - Version 2.0

Chapter 1: Overview

BREAKOUT.AES - digital input / output, 8 AES3 ports (16 channels)

Article Code: DOBOB0887

BREAKOUT.AESID - digital input / output, 16 AESid ports (32 channels)

Article Code: DOBOB0888

Feature Summary

BREAKOUT.AN8 8 x XLR connector male

8 x XLR connector female

2 x DSUB-25 (AES59 analog pinout - 'TASCAM')

BREAKOUT.AN16I 16 x XLR connector female

2 x DSUB-25 (AES59 analog pinout - 'TASCAM')

BREAKOUT.AN16O 16 x XLR connector male

2 x DSUB-25 (AES59 analog pinout - 'TASCAM')

BREAKOUT.AES 8 x XLR connector male

8 x XLR connector female

2 x DSUB-25 (AES59 digital pinout - 'TASCAM')

BREAKOUT.AESid* 16 x BNC connector (75 Ω)

4 x DSUB-25 (AES59 digital pinout - 'TASCAM')

* Impedance and level are adapted according the speciﬁc format.

AES3: 110 Ω, 2-7 Vp-p < > AES3id: 75 Ω, 1 Vp-p

page 8 of 16 BREAKOUT Series Hardware Guide - Version 2.0

CHAPTER 2: Legal issues & facts

Before Installing This Device

WARNING!

Please read and observe all of the following notes before installing

this product:

• Check the hardware device for transport damage.

• Do not use the device at extreme temperatures. Proper operation can

only be guaranteed between temperatures of 5ºC and 45ºC and a

maximum relative humidity of 80%, non-condensing.

Defective Parts/Modules

WARNING!

This device contains no user-serviceable parts. Therefore do not open the device.

In the event of a hardware defect, please send the device to your DirectOut

representative together with a detailed description of the fault.

We would like to remind you to please check carefully whether the failure is

caused by erroneous conﬁguration, operation or connection before sending parts

for repair.

page 9 of 16BREAKOUT Series Hardware Guide - Version 2.0

CHAPTER 2: Legal issues & facts

Intended Operation

The BREAKOUT series is designed for passive adaption of analog or digital audio

(AES3, AES3id) signals.

Updates

DirectOut products are continually in development, and therefore the information

in this manual may be superseded by new releases. To access the latest

documentation, please visit the DirectOut website:

www.directout.eu

WARNING!

No compensation can be claimed for damages caused by operation of this unit

other than for the intended use described above. Consecutive damages are also

excluded explicitly. The general terms and conditions of business of DirectOut

GmbH are applied.

Conditions of Warranty

This unit has been designed and examined carefully by the manufacturer and

complies with actual norms and directives.

Warranty is granted by DirectOut GmbH over the period of 36 months for all

components that are essential for proper and intended operation of the device. The

date of purchase is applied for this period.

Consumable parts (e.g. battery) are excluded from warranty claims.

WARNING!

All claims of warranty will expire once the device has been opened or modiﬁed, or

if instructions and warnings were ignored.

For warranty claims please contact the dealer where your device was acquired.

page 10 of 16 BREAKOUT Series Hardware Guide - Version 2.0

CHAPTER 2: Legal issues & facts

Conformity & Certiﬁcates

This device complies with the basic requests of applicable EU guidelines. The

appropriate procedure for approval has been carried out.

RoHS

(Restriction of the use of certain Hazardous Substances)

This device was constructed fulﬁlling the directive on the restriction of the use of

certain hazardous substances in electrical and electronic equipment 2011/65/EU

and 2015/863.

WEEE

(Directive on Waste Electrical and Electronic Equipment)

Due to the directive 2002/96/EC for waste disposal this device must be recycled.

For correct recycling please dispatch the device to:

DirectOut GmbH,

Leipziger Str. 32

09648 Mittweida

Germany

Only stamped parcels will be accepted!

WEEE-Reg.-No. DE 64879540

Contact

DirectOut GmbH

Leipziger Str. 32, 09648 Mittweida, Germany

Phone: +49 (0)3727 5665-100

Fax: +49 (0)3727 5665-101

Mail: [email protected]

www.directout.eu

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DirectOut Technologies Computerhardware Handbücher

DirectOut Technologies

DirectOut Technologies PRODIGY.MP Bedienungsanleitung

DirectOut Technologies

DirectOut Technologies EXBOX.GPIO Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung