DISTEC ECO-Line Series Bedienungsanleitung

USER MANUAL

ECO-Line series

202202_manual_ECO-Line_EN.pdf

ECO-Line monitors

The contents of this manual are subject to change without notice.

Reproduction of this manual in parts or entirely without the previous authorization of Distec GmbH is prohibited.

Distec GmbH is not liable for errors and collateral or subsequent damage which result from supply, deployment or any other utilisation of this document.

All product names mentioned in this document are trademarks or registered trademarks of their due owners.

Table of contents

Table of contents.................................................................................................3

1. Generalspecication..................................................................................4

2. Scope of delivery........................................................................................4

3. General Safety Regulations .......................................................................5

4. First Installation..........................................................................................8

5. ECO-Line monitor controller .....................................................................10

6. Maintenance ............................................................................................18

7. Warranty / Service ...................................................................................18

8. Disposal....................................................................................................20

9. Declaration of Conformity ........................................................................21

General specication

1. General specication

Scope of Document

This user manual is valid for ECO-Line monitors by screen size of 109.2 cm (43“) up to 218.4 cm (86“) .

Important note: This user manual is complemented by other additional documents. Please note the information on this.

This document and all other referenced documents can be found at web site: www.distec.de/en.

ECO-Line variants:

Monitors 43“/ 55“/ 86“ with integrated controller, 2 x HDMI (in), 2 x USB 2.0, 1 x VGA in, 1x AUDIO in, 1x AUDIO out, 1x SPDIF, 1x

RS232, 1x RJ45 in.

2. Scope of delivery

When unpacking the monitor, please check if the following accessories are included in the shipment:

Note: Pictures can differ from actually supplied products.

Product information

Power cable HDMI cable remote control Wall mount*

*only for 43“and 55“

General Safety Regulations

3. General Safety Regulations

Safety information

Please read this safety information carefully for your personal safety and for the prevention of property damage.

In case of a malfunction, immediately disconnect the power plug and contact your dealer or the next Distec GmbH service centre. A

malfunction is also considered if the housing, a control element or cable is damaged or if liquids or other objects penetrate the monitor.

Please read the safety information carefully before installing the device. If you have any doubts about whether the device may be used

in a particular environment, please contact our service partner.

Repairs

Repairs may only be carried out by authorized technical personnel. Unauthorized access or improper repairs might cause serious prop-

erty damage or cause danger to the user. In addition to that, any legitimate warranty claim expires.

Electrical connection

Disconnect the monitor from socket before executing any work. Do not touch or connect data cables or power cables during thunder-

storms.

System start-up

Before the system start-up let the monitor adjust to the room temperature. Do not expose the device to direct heat sources. In case

of condensation, please wait a minimum of 12 hours before switching on the monitor. The monitor shall only be installed and used

according to this documentation data sheets. Only qualied personnel may perform the initial installation and system setup.

Qualied personnel

Qualied personnel, in terms of the safety information of this documentation, are persons who are qualied to activate, ground and

label devices, systems and circuits according to the safety standards.

Operation

For a proper and safe utilization of the product, adequate transportation, storage, installation, assembly, careful handling and main-

tenance are essential. The device is only certied for in-door operation. Extreme ambient conditions shall be avoided and the monitor

shall be protected from dust, humidity and heat. Do not expose the monitor to direct sunlight.

Transport

Unpack the monitor at the place of installation. Use only original packaging for transportation. Please observe these rules for any later

transport.

Condensation

Avoid condensation during transport at low temperatures or at extreme uctuations of temperature.

General Safety Regulations

• Do not put objects onto the device.

• Do not place candles, heaters or humidier near the device.

• Keep the device away from replaces and ammable materials.

• According to the size, devices may be difcult to handle and very heavy. Ensure that at

least two people lift and carry the device.

• Put down the device slowly and carefully to avoid damaging the LCD screen. Ensure that

the device stands stable.

• Keep packaging away from children. Danger of suffocation!

• Use our specied and professionally mounted wall mounting only.

• Do not use extension block to plug several devices into a single socket.

• Do not use damaged or loose sockets to plug in the device.

• Plug the device in earthed sockets only.

• Operate the device with the power cables included in the delivery packet only.

• Use undamaged power cables only.

• When plugging in and out, do not touch the power cable with wet hands.

• Ensure that the power cable is plugged in the socket safely and correctly.

• Use for devices with external power supply only the supplied original power supply, or

an equivalent Low Power Source (LPS).

Safety guidelines for the handling of LCD monitors

• If the device is not used for a long period of time, unplug the power cable.

• Do not unplug the power cable while the device is powerd on, except for emergencies.

• To unplug the device without problems, sockets have to be easily accessible.

• Ensure that the power cable does not get pinched or kinked.

• Do not place heavy objects on the power cable.

General Safety Regulations

• Attention! High voltage! Never open the device by yourself.

• In case of unusual noises, burnt smell or smoke unplug the power cable.

• Do not insert objects into the device through the ventilation slots.

• If the same picture is displayed over a longer period of time, an after-image may arise.

• When exchanging batteries of the remote control, pay attention to the polarity. Keep

batteries away from children and ensure an environmentally correct disposal.

• Protect your device from water splash.

• When cleaning, please make sure that no liquids get into the device.

• Screens and surfaces can be easily scratched. Therefore, please use the prescribed

cloth only.

• Please use a soft, moist cloth for cleaning.

• For cleaning the screen, please use only commercially available screen cleaner. Do not

spray the cleaner directly to the device but onto a cloth.

• Please clean ventilation slots regularly to ensure a good air circulation.

• Do not install the device in places where it is exposed to environmental impacts such

as rain or direct sunlight.

• Do not install the device in places where it is exposed to high humidity, dust or smoke.

In case of doubt, please contact your sales partner.

• Ensure sufcient ventilation of the device.

• Keep a minimum distance of at least 10 mm devices to the wall, for devices with inte-

grated PC of at least 40 mm.

• Ensure compliance with the operating temperature.

First Installation

4. First Installation

Position of connectors and controls

All connectors for power and cables are located at the bottom of the back side of the display.

Connection for power cable and on / off switch

Data cable connectors, OSD menu buttons,

Mounting

Distance to wall:

• devices without integrated PC: min.10 mm

• devices with integrated PC: min. 40 mm

Mounting with VESA compatible brackets

The Eco-Line monitors are supplied with VESA-compatible mounting holes and some with wall brackets. The monitor can be mounted

in landscape format and portrait format using VESA-compatible wall mounts whose load capacity corresponds to the weight of the

monitor.

The operating position of the device is perpendicular (90 degrees to the oor). Pay attention to the permissible tilt angle for wall moun-

ting. The device can be operated both in landscape mode and in portrait mode.

VESA standards 43“: MIS-F 200 x 200 mm (M6)

VESA standards 55“: MIS-F 400 x 200 mm (M6)

VESA standards 86“: MIS-F 800 x 600 mm (M8)

CDD

A: 50 mm

B: 50 mm

C: 10 mm/ 40 mm

D: 0 mm

Seitenansicht

Ansicht von oben

oben

unten

First Installation

Allowed tilt angle for mounting

Attention! All monitors are not allowed to be mounted with a tilt angle of 0°.

Connecting to power

The ECO-Line monitor requires an AC voltage of 100-240 V AC. The standard delivery includes a suitable power cable for connecting

the power supply.

Please pay attention that there is a suitable socket near the device, as a disconnecting device.

Note: Install all data cables to external devices before connecting the display to power.

• Switch the on/of switch in position off.

• Connect the power cable to the display.

• Connect the power cable to a power socket.

• Switch the display on .

Infrared sensor

The IR sensor is located in the lower area on the front of the monitor (43“- 86“).

On/O Button Power supply

ECO-Line monitor controller

5. ECO-Line monitor controller

ECO-Line monitors have the following connections and controls:

Connect to a PC or an external device with HDMI cable

Connect to a projector with HDMI cable

HDMI HDMI

No. Description Function

1 VGA IN external image input

2 AUDIO IN external audio input

3 HDMI IN High-Denition-Multimedia Interface signal input, connect with devices with HDMI output

Interface (PC) with HDMI output, set top box or other video device.

5 RS 232 Serial interface to be used for data transmission between devices

6 AUDIO OUT Audio output to external speaker

7SPDIF Transmission of optical signals in multi-channel sound

8 LAN Connection to internal and external networks

9USB 2.0 Connecting USB devices such as mobile hard disk, U disk, USB keyboard and mouse, USB drives, etc .

10 AC IN Power supply, AC input AC

11 AC Switch To turn on or shut down AC power supply

„I“ means on, „O“ means off

HDMI HDMI

Inhaltsverzeichnis

Andere DISTEC Monitor Handbücher

DISTEC

DISTEC Brilan 4K Series Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung