DJ-Tech UM-120 Bedienungsanleitung

USER MANUAL---------------------------------------------------------------------------------1-26

Table of Contents

1 Product description ……………………………………………………………………………………………..1

2 Safety instructions ……………………………………………………………………………………………….2

3 Connections and control elements ………………………………………………………………………….3

3.1 Rear panel description ………………………………………………………………………………………3

3.2 Front panel description ………………………………………………………………………………………3

3.3 Top panel description ………………………………………………………………………………………...4

3.3.1 MP3 player control area ……………………………………………………………………………………4

3.3.2 MP3 player function description ………………………………………………………………………….5

3.3.3 Mixer function area …...…………………………………………………………………………………….9

3.3.4 Mixer control area…………………………………………………………………………………………..10

4 Configuration …………………………………………………………………………………………………….12

4.1 Connection …………………………………………………………………………………………………….12

4.2 Operation precaution ………………………………………………………………………………………..12

5 Technical specifications ……………………………………………………………………………………….13

1 PRODUCT DESCRIPTION

1 2 channel stereo DJ mixer with built-in MP3 decoder.

2 Multiple input and output: input included 1 Mic input, 1 USB input, 1 SD card input, 2 CD input, 2

line input, 2 PHONO input with RIAA trait; output included 1 master output, 2 REC output and 1

headphone output.

3 Blue backlight LCD DOT matrix display with contrast control.

4 Compatible with 4GB SD card and USB stick, full navigation of MP3 with EZ search encoder.

5 Mic input channel with Level and Tone adjust; 2 stereo input with individual Gain, 3 band EQ

(HIGH, MID, BASS) and Vol adjust.

6 200 000 cycles Crossfader & Headphone Crossfader.

7 Stereo headphone monitoring output with MIX, CUE MIX and CUE LEVEL.

8 Input and output channel with individual LED level indication.

9 External low power adapter, which make the unit more safety and better Signal-to-Noise.

10 High glossy finish which make the unit more beautiful.

11 High quality components and our good workmanship, which make our products more reliable.

2 SAFETY INSTRUCTIONS

The lightning flash with arrowhead symbol inside an equilateral triangle is intended to alert User

that the presence of uninsulated ＂hazardous voltage＂within the product’s enclosure, which

may be of sufficient magnitude to induce a risk of electric shock to persons.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

The exclamation mark inside an equilateral triangle is intended to alert user that the presence

of important operating and maintenance (servicing) instructions in the literature accompanying

the product.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

1. Caution: To reduce the risk of electric shock, do not remove

cover(or back). No user-serviceable parts inside. Refer servicing to

qualified personnel.

2. Do not install the equipment in a place exposed to direct sunlight.

3. Do not install the equipment in a dusty, damp or poorly ventilated

place.

4. To prevent damage to the equipment, please unplug from the

power outlet if not in use.

5. To unplug the equipment, always handle the power cord using the

plug. Do not pull out the plug by tugging the cord.

6. Place the equipment on a stable surface and avoid placing other

objects on top.

7. Cleaning care: Use a soft, dry cloth for cleaning. For stubborn dirt,

soak the cloth in a weak detergent solution; wring well and wipe to

remove the dirt. Do not use volatile agents such as benzene or paint

thinner, as they may damage the surface finish of the equipment.

8. Please do not block the cooling vents to avoid overheating.

9. No naked flame sources, such as lighted candles, should be placed

on the apparatus.

3 CONNECTIONS AND CONTROL ELEMENTS

3.1 Rear panel description

Power input, signal input and output components are placed in the rear panel, please refer to Fig

3.1.0：

Fig 3.1.0 rear panel layout

INPUT CH1: When use the same RCA input jacks for PHONO input and Line input, slide to upper

for PHONO input, and slide adown for Line input.

INPUT CH1PH1/L1: PHONO and LINE are the same input jacks; you can choose each of them as

per your requirement, this selection is controlled by Switch .

Attention: Due to the big difference of input sensitivity between PHONO and LINE, please slide

the switch to the position you need firstly, and preset the volume of the related components on

the top panel, and then connect the signal.

INPUT CH1 CD1: for connecting the output signal of CD player.

INPUT CH1 GND: for connecting the external signal source, so as to avoid interference and

improve the Signal-to-Noise.

INPUT CH2: the same working principle as INPUT CH1.

INPUT CH2 PH2/L2: the same working principle as INPUT CH1PH1/L1.

INPUT CH2 CD2: the same working principle as INPUT CH1 CD1

INPUT CH2 GND: the same working principle as INPUT CH1 GND.

OUTPUT MASTER OUTPUT: for connecting the external power amplifier or other audio processors.

OUTPUT REC OUTPUT: Here the output signal is not controlled by the Master volume; it is for

external REC devices.

Power input jack: for connecting the AC power adapter to the mixer, you may use AC 12V,

50Hz or 60Hz output adapter as the power of this unit.

Power ON/OFF: to connect or disconnect the power supply.

3.2 Top panel layout

Mic input jack and headphones output jack are placed on the top panel; please refer to the Fig

3.2.0.

Fig 3.2.0 front panel layout

MIC INPUT：6.35mm BALANCED and UNBALANCED input，which is suitable for MIC which

impedance is around 600 ohm。

HEADPHONES：6.35mm stereo output, which is suitable for headphone which is 32～64 ohm。

3.3 Top panel description

The front panel is mainly divided into two parts: MP3 player area and mixer control area please refer to the Fig 3.3.0

and Fig 3.3.1.

3.3.1 MP3 player control area

Fig 3.3.0 front panel layout (MP3player area)

USB INPUT: USB device is inserted here, if the USB stored any MP3 format music or songs, the

built-in decoder will decode out audio signal and play the music and songs accordingly.

SD INPUT: the SD card is inserted here, if USB stored any MP3 format music or songs, the built-in

decoder will decode out audio signal and play the music and songs accordingly.

LCD display: it is a blue backlight dot matrix LCD, all the functions of MP3 player can be

displayed via this LCD.

CONTRAST: for compensating the display effect for the temperature variety in different areas, or

you can adjust as per your favor, when slide to left, the contrast decreased, when slide to right,

the contrast increased.

USB/SD: To select USB or SD card.

DISPLAY: can see the current status of the LCD, like the PLAY status or the PLAYLIST information.

PREVIOUS: when press this key, it will skip to the last song and play accordingly. It can also turn

over the pages of playlist.

NEXT: when press this key, it will skip to the next song and play accordingly. It can also turn over

the pages of the playlist.

BACKWARD: when in PLAY or PAUSE, press this key can fast backward and monitor. If we press

continuously till it comes to the first program, it will stop search automatically and skip to the last

program and

play accordingly. This BACKWARD key can work with PLAY/PAUSE key and accomplish the CUE

for the current song.

FORWARD: When in PLAY or PAUSE, press this key can fast forward and monitor. If we press

continuously till it comes to the next program, it will stop search automatically and skip to the

next program and play accordingly. This FORWARD key also can work with PLAY/PAUSE key and

accomplish the CUE for the current song.

PLAY/PAUSE: When press this key, it will start or stop the current song, it also can be the

confirmation key for other functions.

CUE: to play a song which is set the CUE point, if there is no CUE point of a song, the default CUE

point will be the start point of a song.

LOOP-IN: to set the start point of the loop playback.

LOOP-OUT: to set the end point of the loop playback.

RELOOP: press this key to start or to stop the looping section which is playing.

MENU/NO: press this key to show the main MENU of this unit, and also can check the current

play status or playlist information as well as the enquiry function of other keys.

PLAYLIST: with PUSH/ENTER, PREVIOUS, NEXT, PLAY/PAUSE and MENU/NO can set up the list,

playback and delete of the Mp3 songs.

PUSH/ENTER: this is a push switch with a rotary encoder, with this rotary function, we can select

the menu up and down, when press this button, we can confirm the selection we made, when

works with other keys, we may accomplish all kinds of desired functions.

3.3.2 MP3 player function area

1The loading and playback of MP3

After connecting power supply, Fig 3.3.2-1 A will appear in the LCD, if there is no USB and SD card

inserted, the Fig A will be changed to Fig B. If there is no contents or no any MP3 format inside the

USB and SD card, Fig B will be NO MP3 MUSIC!

So if we insert USB or SD card with MP3 format, the Fig B will be change to Fig C, it means the songs of

the USB are being loading, the LCD also displays the amount of the songs.

If we insert the USB or SD card firstly and connect to power after, the LCD will displays the Fig A and

then change to Fig D, the loading sequence of the system will be SD card first and then USB stick.

After loading, all the songs as well as the titles and numbers will be displayed according to the

playlist like the Fig E as show below. There are only 4 songs displayed in each page of the LCD, for

more information, please use PUSH/ENTER, PREVIOUS or NEXT to change the pages, the system can

load 500 MP3 songs maximum, due to the there is no more storage inside the system, the loading

capacity is depending on the volume of the USB stick or SD card.

You can use PUSH/ENTER, PREVIOUS or NEXT to select the songs in the playlist, like the second song in

Fig E, an then press PLAY/PAUSE to play directly.

When playing, the first row shows the current device, total songs and the current song; the second

row shows the current title of a song; the third row shows the playback process via graphics mode.

The fourth row shows the current playback time, and after it will be remain time of palyback.

Fig 3.3.2-1 Loading and direct playback

2CREATE PLAYLIST

If you want to reorganize the playback list and sequence of the songs, please enter the edit status

and set up the playlist. You can set up 10 playlist, in each playlist, you can put 120 songs, please

refer to fig 3.3.2-2 below:

After finish loading, press PLAY/PAUSE or PUSH/ENTER to go into the playback, like Fig A, and also you

can go into pause as you wish. When press PLAYLIST, the Fig B will appear, from the top to the

bottom, there are 3 playlist: CREATE PLAYLIST, PLAY PLAYLIST and ERASE PLAYLIST.

Select the CREATE PLAYLIST, and press the PAUSE/TNTER or PLAY/PAUSE key, the display shows 10

playlist like fig C and all of them are empty.

Select each of them and set up your playlist, like the first list PLAYLIST 01 [EMPTY], press PUSH/ENTER or

PLAY/PAUSE, Fig D will appear, and then Fig E, on the left top of Fig E, there is a clue on playlist 1, you

can put your songs inside the list.

Use NEXT or PREVIOUS to select the songs, then press PLAYLIST, the Fig F will appear, it means the first

song has been added to the playlist, so use the same method to put other songs to the playlist 1, like

the Fig G which means 52 songs have been added to the playlist1.

When songs are added to the playlist, you can store them. just press PLAYLIST for 3 seconds till the Fig

H appear, and select SAVE & CLOSE PLAYLIST 01, press PUSH/ENTER or PLAY/PAUSE, Fig I will appear,

then press YES, and PUSH/ENTER or PLAY/PAUSE, fig J will appear, then Fig K. then playlist 1 is done.

Use the same methods to set up the playlist 2 to 10, during the set up, if you want to cancel, please

press MENU/NO to cancel.

Fig 3.3.2-2 set up the playlist

If you want to exchange the SD/USB, please press USB/SD, and then press PLAY/PAUSE or

PUSH/ENTER to confirm. After loading, it is ok to play.

3 PLAY PLAYLIST

After setting up the playlist, you can play each of them, please refer to the Fig 3.3.2-3 for operation.

During playback of a song, press PLAYLIST, Fig B appears, select the PLAY LIST and press PLAY/PAUSE,

Fig C appears, and you may found the PLAYLIST is not empty anymore.

Select PLAYLIST01, and press PLAY/PAUSE, Fig D appears, on the top right of fig D, it shows the current

songs are from playlist 1, meanwhile, it shows the amount of the songs as well as the current songs.

If you want to exit the playlist, press PLAYLIST key, and the STOP PLAYLIST in Fig E, then PUSH/ENTER or

PLAY/PAUSE key, press YES to come back to the original Stochastic playback mode in Fig F, please

refer to the Fig G.

Fig 3.3.2-3 playback of playlist

4ERASE PLAYLIST

If you want to cancel the playlist you set up before, you may erase it as per the fig 3.3.2-4 show

below:

Fig3.3.2-4 EARSE the PLAYLIST

If the playlist existed, but the status is stochastic, please press PLAYLIST-ERASE PLAYLIST-PUSH/ENTER or

PLAY/PAUSE, and select PLAYLIST01 in Fig G, then PUSH/ENTER or PLAY/PAUSE, select YES in Fig H,

then PUSH/ENTER or PLAY/PAUSE, after fig I, there is Fig J, it means one PLAYLIST 01 is erased.

If you are in PLAY PLAYLIST, like Fig B, please exit the PLAYBACK mode and then do your erase

operation.

Press the PLAYLIST, select the STOP PLAYLIST in Fig C, press PUSH/ENTR or PLAY/PAUSE, then press YES

in Fig D, and PUSH/ENTER or PLAY/PAUSE again, then Fig E, it means the playback of the playlist is

exited, and now is in stochastic playback. Press PLAYLIST again, Fig F appears, follow the same as

below can carry out the erase of the playback.

5PUSH/ENTER quick application

PUSH/ENTER is a high efficiency operation components, with this PUSH/ENTER; we may read and

locate the Menu or playlist quickly and also may check the details for the current songs, for more

details, please refer to 3.3.2-5.

Fig 3.3.2-5 PUSH/ENTER operation

With the PUSH/ENTER rotary knob, we may fast read and locate the menu or playlist, please refer to

Fig A and Fig B, if you would like to continue the next step, please use PUSH/ENTER for confirmation,

otherwise please press MENU/NO.

When uses PUSH/ENTER in a playback of a song, it will select the playlist first and then select the

current song automatically, like Fig C. and if you don’t want to continue the next step, please press

MENU/NO to exit and back to Fig D.

For details of current song, except press BACKWARD or FORWARD for search, press PUSH/ENTER is

much convenient. Take the Fig F for example; if you want to search one point to play, you may press

PUSH/ENTER, please refer to the Fig G. when rotary PUSH/ENTER to right, the icon will go to right,

please refer to Fig H, when press PUSH/ENTER, it will be confirmed to the new position and start the

playback here, please refer to Fig I.

6 CUE set up and two basis operation：

CUE set up: use BACKWARD key or FORWARD key together with PLAY/PAUSE to finish the setup,

when one song is in playing mode, press PLAY/PAUSE key to pause, and then press BACKWARD or

FORWARD key to set up the CUE point. After finishing set up, press PLAY/PAUSE key, the song will

continue to play, and the CUE key LED will be illuminated.

During the playback of one song, you can set up several CUE points, but only the last one is valid.

Basic operation 1: if there is no CUE point in the playback of a song, no matter where is song is, press

CUE key, the song will come back to the start point and will be in pause mode, if we hold the CUE

key, it will come back to the start point as well and continue to play. When release the CUE key, it

will come back to the start point of the song and will be in Pause mode, during all this operation, the

red LED of CUE will not illuminated.

Basic operation 2: after setting the CUE point of a current song, press CUE key will make the song

come back to the cue point and in pause mode. If we hold his key, the song will also back to the

cue point and continue to play, when release the CUE key, the song will come back to the cue

point and in pause mode. During all these operation, the red LED of CUE will be illuminated.

CUE is only valid to the same song.

7Loop function:

Set up the Loop In: press Loop-In during the playback or Pause of one song, the blue LED inside will

be illuminated, the start point of Loop is set up.

Set up the Loop Out: once set up the start point of Loop, then press Loop Out to set up the end point,

the blue LED inside the Loop Out will be illuminated, then the Loop section is finished, the song will

come back to the start point and play automatically.

If you did not cancel the Loop function, once the playback of the loop section is finished, the song

will come back to the start point and continue to play the loop section, if you want to cancel the

Loop, please press the Loop-out key or RELOOP key to cancel the loop, and the blue LED will be go

out. The Loop playback will be valid to the same song only.

3.3.3 Mixer function area

Including Line input CH1, line input CH2, Mic input, master channel and Level indication, please refer

to the fig below:

Fig 3.3.1 front panel layout（Mixer control area）

MIC LEVEL: control the volume of MIC, when slide to the right side, the volume is increased,

when sided to the left side, the volume is decreased or closed.

Inhaltsverzeichnis

Sprachen:

Andere DJ-Tech DJ-Equipment Handbücher

DJ-Tech

DJ-Tech Deckadance DJ Mouse Bedienungsanleitung

DJ-Tech

DJ-Tech iDance Zero Bedienungsanleitung

DJ-Tech

DJ-Tech i-Mix Reload MKII Bedienungsanleitung

DJ-Tech

DJ-Tech DIF-X Bedienungsanleitung

DJ-Tech

DJ-Tech Mix Free Bedienungsanleitung

DJ-Tech

DJ-Tech DIF-IS Bedienungsanleitung

DJ-Tech

DJ-Tech i-mix club edition Bedienungsanleitung

DJ-Tech

DJ-Tech Kontrol One Bedienungsanleitung

DJ-Tech

DJ-Tech Handy Kutz Bedienungsanleitung

DJ-Tech

DJ-Tech Mix Free Bedienungsanleitung

DJ-Tech

DJ-Tech DJ For ALL! Bedienungsanleitung

DJ-Tech

DJ-Tech DIF-2S Bedienungsanleitung

DJ-Tech

DJ-Tech UI Station Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung