dji IN2BS Bedienungsanleitung
User Guide
使用说明
使用說明
ユーザーガイド
사용자 가이드
Bedienungsanleitung
Guía de usuario
Guide de l'utilisateur
Guida dell'utente
Gebruiksaanwijzing
Manual do utilizador
Руководство пользователя
Battery Station (For TB50)
2018.04V1.2
1©2018 DJI All Rights Reserved.
EN
CHS
CHT
JP
KR
DE
ES
FR
IT
RU
NL
PT
User Guide 2
使用说明 8
使用說明 14
ユーザーガイド 20
사용자가이드 26
Bedienungsanleitung 32
Guía del usuario 38
Guide de l’utilisateur 44
Guida dell’utente 50
Gebruikershandleiding 56
Manual do utilizador 62
Руководство пользователя 68
Contents
Compliance Information 74
© 2018 DJI All Rights Reserved. 2
EN
Disclaimer
Thank you for purchasing the Battery Station (For TB50). Read this disclaimer carefully before
using this product. By using this product, you hereby agree to this disclaimer and signify that
you have read it fully. Please use this product in strict accordance with the document and
be sure to pay attention to the Warnings. SZ DJI TECHNOLOGY CO., LTD. And its afliated
companies assume no liability for damage(s) or injuries incurred directly or indirectly from
improper use of this product. Misuse includes, but is not limited to, using unapproved chargers,
charging unapproved batteries, short-circuiting, overheating, modifying the product, or touching
the terminals with skin or metal. Refer to the Safety Guidelines and Disclaimer, Intelligent Flight
Battery Safety Guidelines, and User Manual for applicable information not herein contained.
DJITM is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its afliated
companies. Names of products, brands, etc., appearing in this document are trademarks
or registered trademarks of their respective owner companies. This product and document
are copyrighted by DJI with all rights reserved. No part of this product or manual shall be
reproduced in any form without the prior written consent or authorization of DJI.
This disclaimer is produced in various languages. In the event of divergence among different
versions, the Chinese version shall prevail when the product in question is purchased in China, and
the English version shall prevail when the product in question is purchased in any other region.
Warnings
1. Keep any liquids (oil, water etc.) away from the inside of the Battery Station.
2. DO NOT close the Battery Station during charging or discharging, and ensure it is well
ventilated and able to dissipate heat.
3. The Battery Station is only compatible with the TB50 Intelligent Battery, GL6D10A/GL800A
Remote Controller and WB37-4920mAh-7.6V Intelligent Battery (need to connect with WCH2
Charging Hub). DO NOT attempt to use the Battery Station with any other battery models.
4. Place the Battery Station on a flat and stable surface when in use. Ensure the device is
properly insulated to prevent re hazards.
5. DO NOT touch the metal terminals on the Battery Station. If there is any noticeable debris
buildup, wipe the metal terminals with a clean, dry cloth.
6. Take care to avoid injuring ngers when opening or closing the Battery Station, or using the
retractable trolley handle.
7. Place the batteries in the specied directions.
8. Air pressure in the Battery Station may change during air transportation or after extreme
barometric pressure changes. The pressure valve knob on the side of the Battery Station will
balance the air pressure automatically.
Introduction
Featuring multiple battery ports, the Battery Station can charge/discharge up to four TB50
Intelligent Battery pairs (eight batteries). There are Normal and Quick modes for charging, Normal
mode charges all inserted batteries simultaneously, and Quick mode charges the pair of batteries
with the highest total charge rst. Batteries can be discharged to a power level of about 25% or
50% for transportation or storage. Using the remote controller port or the USB port, the Battery
Station can also provide power to the INSPIRETM 2 / RONINTM 2 / MATRICETM 200 series remote
controller or mobile devices such as smartphones or tablets.
The Battery Station can hold up 12 TB50 Intelligent Batteries, two WB37-4920mAh-7.6V
Intelligent Batteries and a WCH2 Charging Hub. Integrated wheels make the Battery Station easy
to maneuver.
3©2018 DJI All Rights Reserved.
EN
Battery Station ×1 AC Power Cable ×1 Remote Controller Charging
Cable ×2
Overview
15
16 23
25
26 26
27 27
27 27
17
18
19
20
21
22 24
1
2
3
4
5
6
7
8
9
10
11
13
12
14 14 14 14
14 14 14 14
In the Box
1. Retractable Trolley Handle
2. Padlock Holes
3. Locks
4. Handles
5. Pressure Valve
6. Power Port
7. Remote Controller Port
8. Remote Controller Port Status LED
9. USB Port Status LED
10. USB Port
11. Firmware Update Port (Micro USB)
12. Air Vent
13. AC Power Cable Slot
14. Battery Port
15. Battery Status LED
16. Display Screen
17. Status Switch (Charge/Discharge)
18. Option Switch
19. Menu Button
20. Up Button
21. Down Button
22. Conrm Button
23. Power Button
24. Air Intake
25. WCH2 Charging Hub Slot
26. WB37-4920mAh-7.6V Intelligent Battery Slot
27. TB50 Intelligent Battery Slot
© 2018 DJI All Rights Reserved. 4
EN
Using the Battery Station
Charging
1. Connect the Power Port of the Battery Station to a power outlet (100-240V, 50-60Hz) with the
AC power cable.
2. Press the Power Button once to turn on the Battery Station.
3. Toggle the Status Switch to the left to enter the charging status.
4. Toggle the Option Switch to select Normal mode or Quick mode, then
press the Conrm Button.
5. Insert the TB50 Intelligent Batteries into the Battery Port to start
charging. Refer to the “Battery Status LED Description” section for more
information about Status LED patterns.
The eight Battery Ports are divided into four pairs: A, B, C and D.
Power Outlet
Battery Station
OPTION
Normal Quick
Normal mode: Two Intelligent Flight Batteries in the same column (such as A1 and B1) will
charge simultaneously if their power level is similar. Otherwise, the battery station will charge
the battery with the lower power level rst then charge both batteries when their power levels
become similar. Up to eight batteries can be charged simultaneously.
Quick mode: When two battery pairs are in the same column (such as pairs A and B), the pair
with the higher power level will charge rst. When the pair is charged 90%, the station will
stop charging that pair and charge the other pair. When both pairs reach 90%, the station will
continue to charge until all the batteries are fully charged.
• Inserting already-paired batteries into the same pair of battery ports to charge is
recommended.
5©2018 DJI All Rights Reserved.
EN
• You can press the Menu Button and then select Silent Mode in Normal Charging to
mute the charging station. In this mode, the charging current and the fan speed will be
reduced. Note that there will be no sound prompt since the buzzer is turned off.
• If the power is insufcient during charging, the Battery Station will temporarily stop
supplying power to the remote controller port to ensure the batteries charge.
Discharging
1. Connect the Power Port of the Battery Station to a power outlet (100-240V, 50-60Hz) with the
AC power cable.
2. Insert the TB50 Intelligent Battery into the Battery Port.
3. Press the Power Button to turn on the Battery Station.
4. Toggle the Status Switch to the right to enter the discharging status.
5. Toggle the Option Switch to discharge the power level to about 25% or 50%, then press the
Conrm Button to start discharging.
• Select appropriate discharging power level to meet your needs.
25%: This power level is suitable for safe transportation.
50%: This power level is suitable for safe long-term storage.
• All batteries can be discharged at the same time in discharging
status, as soon as inserted into the battery port.
• The discharging process may produce excess heat, please stay away from the air vent to
avoid scalding.
• DO NOT close the battery station during discharging and ensure it is both well ventilated
and able to dissipate heat, to avoid high temperature in the battery station.
Display Screen
The Display Screen will show each battery’s current power level, charging voltage, current,
temperature, remaining charging time and error messages when charging/discharging. If the
temperature is not appropriate for charging, the battery will heat itself automatically or cool to an
appropriate temperature and start charging.
OPTION
25% 50%
Cooling
CHARGING
25.7V
2.9A
94%
34.2
15min
22.9V
0.0A
39%
49
Heating
23.0V
0.0A
40%
3
25.1V
0.0A
80%
28.9
25.9V
2.5A
95%
33.8
21.2V
6.6A
30%
29.9
21.2V
6.6A
31%
29.7
C2
13min 47min 43min
47min
C C C
CCC C
: Battery communication failure, failed to charge a battery, or permanent battery failure.
: Short circuit on the remote controller charging port.
: Fan blocked.
© 2018 DJI All Rights Reserved. 6
EN
Battery Status LED Description
Status LED Description
Charging
—
Solid Yellow Ready to charge
Blinks Yellow Slowly The battery temperature is too high/low. Temperature
must be within operating range
Blinks Green Charging
—
Solid Green Fully charged
—
Solid Red Intelligent Battery error
Discharging
Blinks Yellow Discharging
—
Solid Yellow The battery’s power level is 25%/50%
—
Solid Red Intelligent Battery error
Buzzer Beeping Description
Description Beeping Pattern
Intelligent Battery (Batteries) in a pair of
Battery ports is (are) fully charged Quick beeping
All Intelligent Batteries are fully charged Alternating two short and one long beeps, lasting for
about 1 hour
Battery Status
SN
Cell Voltage
Normal
BATTERY INFORMATION
09UADBU03100YL
Version 1.0.0.35
4.32V4.31V
4.31V4.31V4.32V
4.31V
A1
27�25.4V 32
Press the Menu Button, select Battery Information, and choose a battery with the Up/Down Button.
You can see a corresponding battery's status, temperature, cycle times, total voltage, cell voltage,
and more. Press the Up/Down Button on this page to see other baterries' information without
returning to the previous menu by pressing the Menu Button.
7©2018 DJI All Rights Reserved.
EN
Updating the Firmware
Use DJI ASSISTANTTM 2 and follow the instructions below to update the Battery Station.
1. Connect the Battery Station to a power outlet and press the Power Button to turn on the
Battery Station. Connect the Battery Station to a computer using a Micro USB cable.
2. Launch DJI Assistant 2 and log in with a registered DJI account.
3. Select “Battery Station” and click “Firmware Upgrade” on the left-hand side.
4. Select the rmware version required.
5. DJI Assistant 2 will download and upgrade the rmware automatically.
6. The Battery Station will automatically restart when the update has been successfully
completed.
7. Repeat this process if the rmware update fails for any reason.
Specications
Model IN2BS
Dimensions 484 mm × 226.5 mm × 220 mm
Net Weight 7.7 kg
Max Internal Load 12 kg
Compatible Stored Items
TB50 Intelligent Battery × 12
WB37-4920mAh-7.6V Intelligent Battery × 2
WCH2 Charging Hub × 1
AC Power Cable × 1
Input 100-240 V, 50-60 Hz
Output
Battery Port: 26.1 V max., 6.75 A max. × 8
Remote Controller Port: 26.1 V max., 4 A max. × 2
USB Port: 5 V, 2 A × 2
Operating Temperature 41° to 104° F (5° to 40° C)
Charging Time*
TB50 Intelligent Battery:
90 minutes (Normal mode); 35 minutes (Quick mode);
4 hrs 20 minutes (Silent mode)
Remote Controller:
2 hrs 24 minutes (GL6D10A); 3 hrs (GL800A)
* Charging times are tested in a lab environment at room temperature. This values should be used for
reference only.
© 2018 大疆创新 版权所有 8
CHS
免责声明
感谢您购买电池管理站（TB50 适用）。在使用之前，请仔细阅读本声明，一旦使用，即被
视为对本声明全部内容的认可和接受。请严格遵守本说明使用该产品，并务必重视注意事项。
因用户不当使用（包括但不限于：使用非 DJI 官方提供的充电器，为非指定型号的电池充电，
使产品短路、发热、进入异物，用手或金属触碰端子等）造成的任何损失，深圳市大疆创
新科技有限公司及其关联公司将不承担任何责任。其他未尽事项请参考《免责声明和安全
操作指引》、《智能飞行电池安全使用指引》和《用户手册》。
DJITM 是深圳市大疆创新科技有限公司及其关联公司的商标。本文出现的产品名称、品牌等，
均为其所属公司的商标或注册商标。本产品及手册为深圳市大疆创新科技有限公司版权所
有。未经许可，不得以任何形式复制翻印。
关于不同语言版本的免责声明可能存在的语义差异，中国以简体中文版为准，其他地区以
英文版为准。
产品注意事项
1. 保持箱内干燥，切勿进入水、油等液体。
2. 请勿合上电池管理站进行充电或放电，并保持通风和散热。
3. 电池管理站仅适用于为 TB50 智能电池、GL6D10A/GL800A 遥控器及 WB37-4920mAh-
7.6V 智能电池（需配合 WCH2 充电管家使用）充电。请勿使用电池管理站为其他型号
电池充电。
4. 使用时请将电池管理站平稳放置，并注意绝缘及防火。
5. 请勿用手或其他物体触碰金属端子。若金属端子附着异物，请用干布擦拭干净。
6. 开合电池管理站及伸缩拉杆时小心夹手。
7. 请按照指定方向放置电池。
8. 若经过长时间空运或环境气压变化，电池管理站内部气压可能改变。此时压力均衡阀会
自动调节使箱内外气压均衡，无需手动调整。
简 介
电池管理站提供多个电池接口，可为最多四组（八块）TB50 智能电池进行充电 / 放电。充
电状态下提供普通与快速两种模式，普通模式最多可为所有电池同时充电，快充模式则会
优先选择成对且总电量较高的电池组进行充电。放电状态下电池管理站可放电使电池电量
分别保持在约 25% 或50%，以便电池进行安全运输或存储。电池管理站同时提供遥控器
充电接口和 USB 接口，可为 INSPIRETM 2 / RONINTM 2 / MATRICETM 200 系列遥控器以及
智能手机、平板电脑等外接设备充电。
电池管理站最多可容纳 12 块TB50 智能电池、两块 WB37-4920mAh-7.6V 智能电池和一个
WCH2 充电管家箱体配备拉杆，方便外出携带。
9©2018 大疆创新 版权所有
CHS
物品清单
电池管理站 ×1 AC 电源线 ×1遥控器充电线 ×2
部件名称
1. 可伸缩拉杆
2. 挂锁孔
3. 锁扣
4. 提手
5. 压力均衡阀
6. 电源接口
7. 遥控器接口
8. 遥控器接口指示灯
9. USB 接口指示灯
10. USB 接口
11. 固件升级接口（Micro USB）
12. 出风口
13. AC 电源线存储位置
14. 电池接口
15. 电池状态指示灯
16. 显示屏
17. 状态切换开关（充电 /放电）
18. 选择切换开关
19. 菜单按键
20. 上翻按键
21. 下翻按键
22. 确认按键
23. 电源按键
24. 进风口
25. WCH2 充电管家存储位置
26. WB37-4920mAh-7.6V 智能电池存储位置
27. TB50 智能电池存储位置
15
16 23
25
26 26
27 27
27 27
17
18
19
20
21
22 24
1
2
3
4
5
6
7
8
9
10
11
13
12
14 14 14 14
14 14 14 14
Andere Handbücher für IN2BS
1
Inhaltsverzeichnis
Sprachen:
Andere dji Akkuladegerät Handbücher
dji
dji 9749951 Bedienungsanleitung
dji
dji MG 6-Channel Bedienungsanleitung
dji
dji IN2BS Bedienungsanleitung
dji
dji MC6S600 Bedienungsanleitung
dji
dji AGRAS T40 Bedienungsanleitung
dji
dji WB37 Bedienungsanleitung
dji
dji MATRICE 3D Series Bedienungsanleitung
dji
dji AVATA Bedienungsanleitung
dji
dji SPARK Bedienungsanleitung
dji
dji ROBOMASTER Bedienungsanleitung
