Dji Thumb Controller Bedienungsanleitung

Thumb Controller

V1.0 2015.4

User Manual

Disclaimers and Warnings

Congratulations on purchasing your new DJI product. Carefully read

the manual and all disclaimers before using this product. By using

this product, you hereby agree to this disclaimer and signify that you

have read it in its entirety. You agree that you are responsible for your

own conduct, for all content that is created using this product, and for

any consequences that may arise from either. You agree to use this

product only for purposes that are proper and in accordance with local

regulations, stated terms, and all applicable polices and guidelines.

By reading this disclaimer, you also agree that:

1. Any part of this disclaimer is subject to change without prior

notice. Refer to www.dij.com for the latest version.

2. DJI reserves the right of nal interpretation of this disclaimer.

As DJI has no control over use, setup, nal assembly, modication,

or misuse of its products, no liability shall be assumed or accepted

for any resulting damage or injury. By using, setting up, or

assembling the product, the user accepts all resulting liability. DJI

assumes no liability for damages or injuries incurred directly or

indirectly from the use of this product.

DJI is a registered trademark. All names of products, brands, etc.

appearing in this manual are trademarks or registered trademarks

of their respective owner companies. This product and manual are

or manual shall be reproduced in any form without the prior written

consent or authorization of DJI. No patent liability is assumed with

respect to the use of the product or information contained herein.

Content

Disclaimers and Warnings 2

In the Box 4

Introduction 5

Thumb Controller 5

External Receiver (For Ronin Only) 6

Installation 7

Installing the Thumb Controller 7

Installing the External Receiver (For Ronin Only) 8

Connecting the Thumb Controller to the Gimbal 9

Connecting the Thumb Controller to the Ronin-M 9

Connecting the Thumb Controller to the Ronin 9

Indicator Status 11

Using the Thumb Controller 12

Mode 12

Function 13

Gimbal Settings 13

Device Settings 14

DJIAssistantApp Tuning 16

DJI PC/MACAssistant Tuning 17

Settings 17

Updating the Thumb Controller and the Receiver 18

Specications 20

In the Box

Check to ensure that all of the following items are included in the

package. If any items are missing, contact DJI or your local dealer.

The following items are included with the Thumb Controller for the

Ronin-M:

The following items are included with the Thumb Controller for the Ronin:

Thumb Controller×1 Quick Release Accessory

Mount×1

USB Cable×1 Rubber

Ring×1

Receiver×1 Adhesive Tape×14-Pin Cable×1

Thumb Controller×1 Quick Release Accessory

Mount ×1

USB Cable×1

Introduction

The Thumb Controller is designed specically for DJI Ronin series

handheld gimbals. It provides a simple, intuitive interface for

controlling the gimbal’s pan, tilt, and roll motion. The pressure-

sensitive stick and the easy-to-read OLED display give Ronin users

more control than ever before.

The Thumb Controller communicates with the Ronin-M via a

preinstalled internal receiver. An external receiver is needed when

the Thumb Controller is used with the Ronin.

Thumb Controller

[1] Power Button

Press and hold the power

button to turn on/off the Thumb

Controller

[2] Status Indicator

Indicates the status of the

Thumb Controller

[3] OLED Display

Displays the menu of the

Thumb Controller

[4] Pressure-Sensitive Stick

Transmits the user’s input to

the force sensor

[1] [2]

[3]

[4]

[5] Micro-USB Port

For charging the Thumb

Controller and upgrading its

rmware

[6] Override Button

Allow the Thumb Controller

to reactivated and updated

following a failure update

process

[1] CAN Port

Connects the receiver to the

Ronin

[2] Bind Button

Connects the Thumb

Controller to the Ronin

[3] LED Indicator

Indicates the status of the

receiver

[4] Micro-USB Port

For upgrading the rmware

External Receiver (For Ronin Only)

[5]

[6]

[1]

[2]

[3]

[4]

Installation

Installing the Thumb Controller

1. Install the quick-release accessory mount by clamping it around

the handlebar of the Ronin and tightening the screw. Remember

to place the rubber ring on the on the handlebar and clamp the

accessory mount around it when installing the unit on the Ronin-M.

2. Insert the Thumb Controller into the quick-release accessory

mount and ensure that it is secure.

Installing the External Receiver (For Ronin Only)

1. Use the 4-pin cable to connect the CAN port on the Ronin to the

CAN 1 or Can 2 port on the receiver.

2. Use the adhesive tape to secure the receiver on the Ronin.

Connecting the Thumb Controller to the Gimbal

Connecting the Thumb Controller to the Ronin-M

1. Turn on the Ronin-M.

2. Press the Ronin-M’s Bind Button (shown below) one time. The

LED indicator on the Ronin-M will rapidly blink green.

3.Turn on the Thumb Controller. If the LED indicator on the Ronin-M

and the LED indicator on the Thumb Controller both glow solid

green, they have been successfully connected.

Connecting the Thumb Controller to the Ronin

1. Turn on the Ronin.

2.Press the Bind Button on the receiver one time. The LED indicator

on the receiver will rapidly blink green.

3.Turn on the Thumb Controller. If the LED indicator on the receiver

and the LED indicator on the Thumb Controller both glow solid

green, they have been successfully connected.

Bind Button

The binding process only needs to be completed one time,

unless the bind button is pressed or the Ronin/Ronin-M

needs to be connected to another Thumb Controller.

Bind Button

Inhaltsverzeichnis

Andere dji Kamerazubehör Handbücher

dji

dji OSMO Bedienungsanleitung

dji

dji Zenmuse Z15-GH4 (HD) Bedienungsanleitung

dji

dji ZENMUSEX9 Bedienungsanleitung

dji

dji OSMO Bedienungsanleitung

dji

dji Zenmuse Z15 Bedienungsanleitung

dji

dji Ronin-S Bedienungsanleitung

dji

dji RONIN 2 Bedienungsanleitung

dji

dji Zenmuse XT Bedienungsanleitung

dji

dji Three-Channel Follow Focus Bedienungsanleitung

dji

dji DJLRF Bedienungsanleitung

dji

dji mavic Bedienungsanleitung

dji

dji ZENMUSE Z3 Bedienungsanleitung

dji

dji RONIN 2 Bedienungsanleitung

dji

dji AGRAS T30 Bedienungsanleitung

dji

dji MINI 3 PRO Bedienungsanleitung

dji

dji Zenmuse H2-2D Bedienungsanleitung

dji

dji RONIN-SC Bedienungsanleitung

dji

dji crystalsky CS785 Bedienungsanleitung

dji

dji Zenmuse X5 Bedienungsanleitung

dji

dji RONIN-S Focus Motor Bedienungsanleitung

dji

dji Ronin-MX Bedienungsanleitung

dji

dji Ronin-S Bedienungsanleitung

dji

dji TB50 Bedienungsanleitung

dji

dji OSMO MOBILE 2 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

dji Thumb Controller Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken