Dji Mavic 2 Enterprise Bedienungsanleitung

v1.0

Quick Start Guide

快速入门指南

快速入門指南

クイックスタートガイド

퀵 스타트 가이드

Kurzanleitung

Guía de inicio rápido

Guide de démarrage rapide

Guida di avvio rapido

Snelstartgids

Guia de início rápido

Guia de Início Rápido

Краткое руководство пользователя

MAVIC 2

ENTERPRISE

Advanced

Contents

CHS

CHT

PT-PT

PT-BR

Quick Start Guide 2

快速入门指南11

快速入門指南 20

クイックスタートガイド29

퀵 스타트 가이드 38

Kurzanleitung 47

Guía de inicio rápido 56

Guide de démarrage rapide 65

Guida di avvio rapido 74

Snelstartgids 83

Guia de Início Rápido 101

Guia de início rápido 92

Краткое руководство пользователя 110

Aircraft

The DJITM MAVICTM 2 Enterprise Advanced features omnidirectional Vision Systems

and Infrared Sensing Systems*, and comes with a fully stabilized 3-axis gimbal camera

with a thermal camera and a visual camera, providing both infrared and visual images

simultaneously. DJI’s Obstacle Sensing technology helps users to fly and capture

complex shots while AirSense provides awareness of the surrounding airspace and

password protection ensures access to the aircraft and all data is secure. The Mavic

2 Enterprise Advanced supports up to 32× digital zoom and has a smoother thermal

imaging sensor with a signicantly higher resolution as well as a higher pixel visual

sensor. The aircraft boasts a maximum flight speed of 44.7 mph (72 kph) and a

maximum ight time** of 31 minutes.

1. Gimbal and Camera

A. Thermal Camera

B. Visual Camera

2. Forward Vision System

3. Downward Vision System

4. Lateral Vision System

5. Downward Infrared Sensing

System

6. Auxiliary Bottom Light

7. MicroSD Card Slot

8. Front LEDs

* The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the

Disclaimer and Safety Guidelines and User Manual to learn more. http://www.dji.com/mavic-2-enterpise-

advanced

** Maximum ight time was tested in an environment with no wind while ying at a consistent 15.5 mph (25 kph).

This value is for reference only.

9. Motors

10. Propellers

11. Antennas

12. Aircraft Status Indicator

13. Upward Infrared Sensing

System

14. Backward Vision System

15. Intelligent Flight Battery

16. Battery Level LEDs

17. Power Button

18. Battery Buckles

19. USB-C Port

20. Link Button/Linking

Status Indicator

21. Extended Port (to

connect accessories)

22. Extended Port Cover

DJI Smart Controller

The DJI Smart Controller is a remote controller built with DJI’s long-range transmission

technology OCUSYNCTM 2.0, offering a maximum transmission range of 6.2 mi (10 km)

and provides a live HD view from the aircraft’s camera. The Smart Controller comes

with a number of aircraft and gimbal controls as well as customizable buttons and has

a built-in 5.5-inch high-brightness screen with multiple functions such as Bluetooth and

GNSS. Connection to the Internet via Wi-Fi is also supported. The Smart Controller has a

maximum working time of 2.5 hours*.

* The Smart Controller is able to reach its maximum transmission distance (FCC) in a wide-open area

with no electromagnetic Interference at an altitude of about 400 ft (120 m).

The maximum runtime is tested in a laboratory environment. This value is for reference only.

1. Antennas

2. Back Button / Function Button

3. Sticks

4. RTH Button

5. Flight Pause Button

6. Flight Mode Switch

7. Status LED

8. Battery Level LEDs

9. 5D Button

10. Power Button

11. Conrm Button / Customizable Button C3

12. Touch Screen

13. USB-C Port

14. Microphone

15. Gimbal Dial

16. Record Button

17. HDMI Port

18. MicroSD Card Slot

19. USB-A Port

20. Focus / Shutter Button

21. Aperture/Shutter Adjustment Dial

69999

1010101010101010101010101010

77 8

17 18 19

69999

1010101010101010101010101010

77 8

17 18 19

69999

1010101010101010101010101010

77 8

17 18 19

22. Air Vent

23. Sticks Storage Slot

24. Customizable Button C2

25. Speaker

26. Customizable Button C1

27. Air Intake

1. Preparing the Aircraft

Remove the gimbal

cover from the camera.

Unfold the front arms. Unfold the rear arms.

Unfolded

Unfold the front arms and the propellers before the rear ones. All arms and propellers

must be unfolded before takeoff.

Press the propellers

down and rotate until

they click in place.

Match the propellers

to motors.

Marked Unmarked

2. Charging the Batteries

Use the provided charger to fully

charge the Intelligent Flight Battery

before rst use.

Remove the Intelligent Flight Battery

Charging Time:

~1 hour 30 minutes

Charging Time:

~2 hours

Please use the ofcial 24W USB charger to charge the Smart Controller. When a

standard 24W USB charger is not available, it is recommended to use an FCC/

CE certied USB charger rated 12V/2A.

24W USB Charger

Battery Charger

USB-C Cable

Power Outlet

100 - 240V

Install the battery to the aircraft and power it on. Once the battery temperature is lower

than 6° C, it will auto heat to maintain a temperature between 8-10° C. Refer to the

User Manual for more details.

Low

High

Checking the Battery Levels and Powering On/O

Press once to check the battery level.

Press, then press and hold to turn on/off.

Press once to check the battery level on the

LCD screen.

Press once, then press and hold to turn on/

off the remote controller.

Low High

Lift the antennas Rotate to attach

the sticks

Remove the sticks

The optimal transmission range is shown above. Ensure the antennas are facing towards

the aircraft. When the angle between the antennas and the back of the Smart Controller

is 80° or 180°, the connection between the Smart Controller and the aircraft can reach

its optimal performance.

80°

3. Preparing the Remote Controller

Ensure the control sticks are rmly mounted.

In real operation, the DJI Pilot app will prompt to warn that the transmission signal

is weak, and please adjust the antennas to ensure that the aircraft is back to the

optimal transmission range.

DJI Pilot

App

5. Flight

Ready to Go (GPS)

Left stick up (slowly)

to take off

Left stick down (slowly) until you touch the

ground

Hold a few seconds to stop the motors

Before taking off, make sure the Aircraft Status Bar

in DJI Pilot displays “Ready to Go”.

Combination stick command to

start/stop the motors

Manual Takeo / Landing

Only stop motors mid-ight in emergency situations when doing so can reduce

the risk of damage or injury. The method to stop the motor can be set in DJI Pilot.

4. Preparing for Takeoff

Power on the remote controller Power on the aircraft Launch DJI Pilot

Use a DJI account to activate the aircraft and the Smart Controller. Activation

requires an internet connection. Before activating the aircraft in DJI Pilot, power on

the Smart Controller and follow the prompts to activate.

Internet

Set a password for the aircraft in the DJI Pilot app to ensure secure access and

protect your onboard data.

Remote Controller Operation

* Modular Accessories

Left Stick

Down

Turn Left Turn Right

Right Stick Forward

Backward

Left Right

The default flight control is known as Mode 2. The left stick controls the aircraft's

altitude and heading, while the right stick controls its forward, backward, left and right

movements. The gimbal dial controls the camera's tilt.

Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to

the Home Point, you should guide it with the control sticks.

Press the Flight Pause button for emergency braking during ight.

M2E Beacon M2E Spotlight

M2E Speaker M2EA RTK Module

(not included)

120m

≥10 m/s

Fly in Open

Areas

Strong GPS

Signal

Maintain Line of

Sight

Fly Below 400 Feet

(120 m)

Avoid flying over or near obstacles, crowds, high voltage power lines, trees or

bodies of water.

DO NOT fly near strong electromagnetic sources such as power lines and base

stations as it may affect the onboard compass.

DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog

and wind speeds exceeding 10 m/s or 22 mph.

No Fly Zone

Stay away from the rotating propellers

and motors.

Learn more at:

http://www.dji.com/flysafe

6. Fly Safe

It’s important to understand basic ight guidelines, for the safety of both you and

those around you. Don't forget to read the Disclaimer and Safety Guidelines.

Specications

Aircraft

Takeo Weight 909 g

Max Speed 72 km/h (S-mode) (near sea level, no wind)

Max Service Ceiling Above Sea Level 6000 m

Operating Temperature Range 14° to 104° F (-10° to 40° C)

GNSS GPS+GLONASS

Operating Frequency 2.4-2.4835 GHz; 5.725-5.850 GHz

Transmission Power (EIRP) 2.4 GHz

FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm

5.8 GHz

FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm

Internal Storage 24 GB

Gimbal

Controllable Range Tilt: -90 to 30°

Thermal Camera

Sensor Uncooled VOx Microbolometer

Lens Focal Length Approx. 9 mm

Equivalent: Approx. 38 mm

Sensor Resolution 640×512 @30Hz

Digital Zoom 16×

Pixel Pitch 12 μm

Spectral Band 8-14 μm

Photo R-JPEG

Video MP4

Temperature Measurement Method Spot Meter, Area Measurement

FFC Auto/Manual

Visual Camera

Sensor 1/2” CMOS, Eective pixels: 48 M

Lens FOV: approx. 84°

Equivalent: 24 mm

Aperture: f/2.8

Focus: 1 m to ∞

ISO Range Video: 100-12800 (auto)

Photo: 100-1600 (auto)

Max Image Size 8000×6000

Still Photography Modes Single shot

Interval (2/3/5/7/10/15/20/30/60 s)

Pano: spherical panorama

Video Recording Modes 3840×2160@30fps

1920×1080@30fps

Photo JPEG

Video MP4

Andere Handbücher für Mavic 2 Enterprise

Inhaltsverzeichnis

Andere dji Drohne Handbücher

dji

dji Inspire 1 Pro Bedienungsanleitung

dji

dji PHANTOM 3 PROFESSIONAL Bedienungsanleitung

dji

dji MATRICE 300 RTK Bedienungsanleitung

dji

dji Phantom 4 Advanced + Bedienungsanleitung

dji

dji WIND-4 Bedienungsanleitung

dji

dji Mavic 3 Bedienungsanleitung

dji

dji AGRAS MG-1 Bedienungsanleitung

dji

dji MATRICE 200 series Installationsanleitung

dji

dji MATRICE 200 Bedienungsanleitung

dji

dji MATRICE 350 RTK Bedienungsanleitung

dji

dji MATRICE 200 series Bedienungsanleitung

dji

dji INSPIRE 2 Bedienungsanleitung

dji

dji mavic Bedienungsanleitung

dji

dji Agras MG-1P Bedienungsanleitung

dji

dji MAVIC 2 ZOOM Bedienungsanleitung

dji

dji MATRICE 200 series Bedienungsanleitung

dji

dji FlameWheel550 Bedienungsanleitung

dji

dji RM220 Bedienungsanleitung

dji

dji MAVIC 2 PRO Bedienungsanleitung

dji

dji Zenmuse H3-3D Bedienungsanleitung

dji

dji GUIDANCE Bedienungsanleitung

dji

dji Flamewheel F450 Bedienungsanleitung

dji

dji MAVIC PRO Bedienungsanleitung

dji

dji AGRAS MG-1S RTK Bedienungsanleitung

Beliebte Drohne Handbücher anderer Marken

Ryze

Ryze Tello Bedienungsanleitung

PowerVision

PowerVision PowerRay Bedienungsanleitung

Force1

Force1 rogue F72 Bedienungsanleitung

Zerotech

Zerotech DOBBY Bedienungsanleitung

Protocol

Protocol VIDEODRONE AP Bedienungsanleitung

MAKE

MAKE Terry Kilby Bedienungsanleitung

SYMA

SYMA X440 Bedienungsanleitung

RUKO

RUKO F11 Bedienungsanleitung

SYMA

SYMA X5UW(720P) Bedienungsanleitung

Dynali

Dynali 25 H Leitfaden

Atlas

Atlas AtlasPRO Bedienungsanleitung

Twodots

Twodots TVVIN BOARD Bedienungsanleitung

GDU

GDU SAGA Bedienungsanleitung

Ares

Ares ETHOS QX 130 Bedienungsanleitung

Walkera

Walkera ZHUN Bedienungsanleitung

Potensic

Potensic D58 Bedienungsanleitung

Arris

Arris M900 Bedienungsanleitung

Storm

Storm DJI Flamewheel F450 RTF Bedienungsanleitung

dji Mavic 2 Enterprise Bedienungsanleitung

Beliebte Drohne Handbücher anderer Marken