Dji SPARK Bedienungsanleitung

Main Screen

Connect* your DJI Spark to your iPhone/iPad! Then tap the Picture to start!

*you can connect directly to the spark wifi or use the DJI remote (WIFI or OTG connection)

Icons in the Main Screen:

Map View:

•View the last known drone position.

User Guide:

• Brings you to this user guide.

App Information:

•Provides you with information on the app version and other useful information.

Waypoint Mission:

•Shortcut to the Waypoint Mission Manager.

Piloting Screen

Fullscreen Mode

VR Mode

Waypoint Mission Manager

App Settings

Camera Settings

Camera Mode Switch

Shutter Button

Open Map View (see Spark Position / choose POI)

Controller Signal Level

Vision System State (On/Off)

Current Flight Mode

Take off / Landing Button

Return To Home Button

Back To Main Screen

Forward Anti-collision System State.

Important: The Forward Anti-collision system is active even in PRO MODE (without

the remote controller), BUT in this mode the Spark can fly faster than the reaction

time / brake distance that the Spark need to avoid forward collision

Right Info Panel

Controller* / Device / Spark GPS state + satellite number

Controller / Device / Spark battery level in percentage

*Only Inspire and M100 Remote Controllers have GPS

Left Info Panel

Drone Speed

Drone Altitude from Take off point

Drone Distance from Piloting Device

Camera Tilt slider

Radar - will show how the drone and the remote are oriented one respect

the other.

It appear on screen only when the drone distance is >20m (>65ft)

Flying Modes

With the remote controller currently you can fly in Atti/GPS Mode or switch to Sport Mode

Without the remote controller you can fly in Atti/GPS Mode, or in settings you can activate the

PRO MODE, that will allow you to fly your Spark Faster ( similar to remote controller Sport

Mode) and also will allow you to fly with out the 100m distance limitation.

IMPORTANT NOTE:

in PRO MODE the obstacle avoidance system will be ineffective because of the higher speed.

VR Mode

In this Mode you will have an immersive flight experience!! Enjoy the First Person View with any VR

headset (goggles)

You also have onscreen 2 Augmented Reality localizer, one will show you your Position, the other will

show you the position of the POI that you can choose on Map.

On screen you have all the information that you need! like distance,altitude,speed,video recording state

and all batteries level.

1 Batteries Level

2 Distance

3 Altitude

4 Video Recoding

State

5 Speed

If you need to look around you while you are wearing the Headset you can press the “C2 button” on the

remote to switch from the Drone point of view to Your point of view using the camera of your iPhone!

(View from the iPhone Camera)

Customise the VR view

The View is full customisable to fit all needs, you can adjust the eye width, the vertical position and the

dimension of the views

When the Drone is Landed follow on screen

instruction!

Move the left stick to left to enter edit Mode

Use the Right Stick to adjust vertical position and

eye-width

Use the Left stick to change View dimension and

confirm

-Press the “Fn button” to start/stop the Head-Tracking for camera Tilt

Ta p t h e r e d “ X” to return to close the VR view and go back to the normal piloting screen

AR Localizer

You have two Augmented Reality Localizer that will help you orient yourself on the Spark video

feed.

The green locator will always indicate your position, while the red one will show you the

Position and Distance of a Point of Interest that you can choose on Map.

GPS Error, compass error or barometer sensor error could affect the accuracy of the localizer

but will always be a great help to find your destination.

Localizers are available in normal mode, full screen and “VR” Mode

You can be switch localizers on/off in the settings.

Set the POI

To choose the POI, open the map view in

the piloting screen, then just tap the map

to set your POI.

Then adjust the Altitude of the POI with

the altitude picker on the left of the

screen (altitude is relative to take off

point)

Altitude Picker Tap to set the POI

Settings

General Settings

Here you can calibrate the Spark and choose some basic

settings such as measurement units (imperial / metric)

VR settings

Basic settings for VR view

RTH settings

Here you change the Altitude of the RTH also you can set the

FailSafe Behaviour

Flight Limit settings

Here you can set the Max altitude and distance for your

flight

Hardware Decoding Option

In setting you can choose hardware decoding ON/OFF, it’s recommended to keep it ON on all device with “A8” chip

or newer (iPhone 6/iPad Mini 4/iPad Air 2 or newer devices) this will reduce video latency also will reduce the over

heating/battery consumption of the device.

MFI Bluetooth Controller

As soon as you connect your MFI controller to your device via bluetooth the on-screen piloting pads will

disappear and you can start to use it!

Thumbsticks - move the Spark (piloting Mode2)

Directional pad - not used

L1 shoulder button - move camera up (pressure sensitive for the speed)

L2 shoulder buttons - move camera down (pressure sensitive for the speed)

R1 shoulder buttons - Start / Stop video recording

R2 shoulder buttons - Shot picture

X button - Start/Stop return home

Y button - switch from drone camere to iPhone camera in VR mode

B button - Head-traking ON/OFF in VR mode

A button - Start / Stop Landing

Autonomous Waypoint Navigation

Ta p t h e i c o n from the main screen of the app or from the piloting screen, to

access the Waypoint Mission Manager

From here you can access to your previous saved waypoint missions, or create a

new one

New mission

tap New Mission, to start to design your waypoint mission, you will enter to a map

view and you are already in “edit mode” to start to draw your mission route.

Andere Handbücher für SPARK

Inhaltsverzeichnis

Andere dji Drohne Handbücher

dji

dji Phantom 3 Advanced Bedienungsanleitung

dji

dji FlameWheel450 Bedienungsanleitung

dji

dji Inspire 2 ProRes Bedienungsanleitung

dji

dji MATRICE 350 RTK Bedienungsanleitung

dji

dji S-900/Zenmuse Betriebsanleitung

dji

dji PHANTOM 4 PRO+ Bedienungsanleitung

dji

dji Inspire 2 Series Bedienungsanleitung

dji

dji PHANTOM 4 PRO Bedienungsanleitung

dji

dji Agras MG-1P Bedienungsanleitung

dji

dji Air 2S Bedienungsanleitung

dji

dji Phantom 4 RTK Bedienungsanleitung

dji

dji Inspire 1 Bedienungsanleitung

dji

dji Mavic 2 Enterprise Bedienungsanleitung

dji

dji Mini 3 Bedienungsanleitung

dji

dji ROBOMASTER TT Swarm Combo Bedienungsanleitung

dji

dji INSPIRE 2 Bedienungsanleitung

dji

dji AGRAS MG-1 Bedienungsanleitung

dji

dji MAVIC MINI Installationsanleitung

dji

dji Agras T25 Bedienungsanleitung

dji

dji PHANTOM 4 PRO Bedienungsanleitung

dji

dji E1200 Standart Bedienungsanleitung

dji

dji M300 RTK Montageanleitung

dji

dji MATRICE 600 Bedienungsanleitung

dji

dji Phantom 3 Standard Bedienungsanleitung

Beliebte Drohne Handbücher anderer Marken

Ryze

Ryze Tello Bedienungsanleitung

PowerVision

PowerVision PowerRay Bedienungsanleitung

Force1

Force1 rogue F72 Bedienungsanleitung

Zerotech

Zerotech DOBBY Bedienungsanleitung

Protocol

Protocol VIDEODRONE AP Bedienungsanleitung

SYMA

SYMA X440 Bedienungsanleitung

SYMA

SYMA X5UW(720P) Bedienungsanleitung

Dynali

Dynali 25 H Leitfaden

Atlas

Atlas AtlasPRO Bedienungsanleitung

Twodots

Twodots TVVIN BOARD Bedienungsanleitung

GDU

GDU SAGA Bedienungsanleitung

RUKO

RUKO F11 Bedienungsanleitung

Ares

Ares ETHOS QX 130 Bedienungsanleitung

Walkera

Walkera ZHUN Bedienungsanleitung

Potensic

Potensic D58 Bedienungsanleitung

Arris

Arris M900 Bedienungsanleitung

Storm

Storm DJI Flamewheel F450 RTF Bedienungsanleitung

XIRO

XIRO Xplorer G Gebrauchs- und Pflegehandbuch

dji SPARK Bedienungsanleitung

Beliebte Drohne Handbücher anderer Marken