Dji RoboMaster LI01 Bedienungsanleitung

RoboMaster Referee System

Light Indicator Module LI01

User Guide

使用说明

v1.0 2018.11

Disclaimer

Thank you for purchasing the ROBOMASTER™ Referee System Light Indicator Module. Please read this

disclaimer carefully before using this product. By using this product, you hereby signify that you have

read and agree to all content herein. Please install and use this product properly and in strict

accordance with the User Manual and product instructions, as well as any relevant laws, regulations, and

policies. Users shall be responsible for the consequences resulting from their behavior while using this

product. DJI™ will not bear any legal responsibilities for any damages due to improper use, installation

or modification.

DJI and RoboMaster are trademarks of SZ DJI™ Technology Co., Ltd and its affiliates. Names of products,

brands, etc., appearing in this document are trademarks or registered trademarks of their respective

of this product or document shall be reproduced in any form without the prior written consent or

authorization of DJI.

DJI reserves the right of final interpretation of this disclaimer.

Product Usage Precautions

1. Before using the product, make sure that there are no short circuits, and that all interfaces are

correctly connected.

2. Before using the product, please download the RoboMaster 2019 Referee System User Manual from

the official RoboMaster website to learn more about the product.

Introduction

The RoboMaster Referee System Light Indicator Module is a unit that shows the current HP and status

of your robot. By checking the status of the light indicator, you can identify the remaining HP and status

of your robot.

Inventory List

Light Indicator Module x 1

Aviation Connector Cable x 1

Component Name

1. Top auxiliary light indicator

2. Front main light indicator

3. Mounting bracket

4. Aviation connector*

*For ease of observation and explanation, the aviation connector that comes with the Light Indicator

Module is hidden in other diagrams used in this User Guide.

Installation Dimensions

Front view Side view

Unit: mm

Installation

The Light Indicator Module can be mounted onto either the large armor or small armor of the Referee

System in the same way. Below is an explanation of how to mount the Light Indicator Module onto the

small armor.

1. Use ten M3 screws to secure the Light Indicator Module to the two sides of the support frame of the

small armor.

2. Secure the Light Indicator Module using the four φ3 through-holes at the side of the mounting

bracket (see Installation Dimensions) and the four M3 threaded holes at the bottom of the

mounting bracket (see below).

Unit: mm

Product Parameters

Model

LI01

Rated Operating Voltage

12 V

Current

1 A~3.5 A

Weight

Approx 350 g

Dimensions

285 × 50 × 84.75 mm

WWW.ROBOMASTER.COM

and

are trademarks of DJI

免责声明

感谢您购买 RoboMaster™裁判系统灯条模块。在使用之前，请仔细阅读本声明，一旦使用，即被视为对本声明全

部内容的认可和接受。请严格遵守手册、产品说明和相关的法律法规、政策、准则安装和使用该产品。在使用产品

过程中，用户承诺对自己的行为及因此而产生的所有后果负责。因用户不当使用、安装、改装造成的任何损失，DJI

™将不承担法律责任。

DJI 和RoboMaster 是深圳市大疆™创新科技有限公司及其关联公司的商标。本文出现的产品名称、品牌等，均为

关于免责声明的最终解释权，归大疆创新所有。

产品使用注意事项

3. 使用时请确保电路无短路、接口按照要求正确连接。

4. 使用前，请前往 RoboMaster 官网下载《RoboMaster 2019 裁判系统用户手册》了解产品更为详细的使用功

能。

简介

RoboMaster 裁判系统灯条模块是显示机器人当前血量和状态的单元。通过观察灯条效果，用户可直观判断机器人

当前剩余血量以及所处的状态。

物品清单

灯条模块 x 1

航空线 x 1

部件名称

1. 顶部辅助灯

2. 前部主灯条

3. 固定支架

4. 航空线*

*为方便观察和讲解其他安装内容，本文所用的其他图示中将灯条模块本身所自带的航空线进行了隐藏。

安装尺寸

正视图侧视图

单位：mm

安装

灯条模块可安装至裁判系统大装甲或小装甲，安装方式相同。下面以将灯条系统安装至小装甲为例进行说明。

3. 用M3x10 的螺丝将灯条模块固定在小装甲支撑架的两侧。

2. 然后利用安装支架侧面的 4个 φ3的通孔（见安装尺寸图）或安装支架底部的 4个M3 螺纹孔（见下图）将灯

条模块固定在其他符合裁判系统安装要求的地方。

单位：mm

产品参数

型号

LI01

额定工作电压

12 V

电流

1A~3.5 A

重量

约350 g

尺寸

285 × 50 × 84.75 mm

WWW.ROBOMASTER.COM

联系我们

RoboMaster Website: www.robomaster.com

RoboMaster BBS: bbs.robomaster.com

RoboMaster Email: robomaster@dji.com

Inhaltsverzeichnis

Andere dji Robotik Handbücher

dji

dji RoboMaster EP Bedienungsanleitung

dji

dji ROBOMASTER Bedienungsanleitung