DJl Mavic Bedienungsanleitung
MAVIC
Propeller Cage
2017.01
V1.0
User Guide
使用说明
使用說明
ユーザーガイド
사용자 가이드
Bedienungsanleitung
Guía del usuario
Guide de l’utilisateur
Guida dell’utente
Gebruikershandleiding
Manual do utilizador
Руководство пользователя
EN
CHS
CHT
JP
KR
DE
ES
FR
IT
RU
NL
PT
User Guide 2
使用说明 6
使用說明 10
ユーザーガイド 14
사용자가이드 18
Bedienungsanleitung 22
Guía del usuario 26
Guide de l’utilisateur 30
Guida dell’utente 34
Gebruikershandleiding 38
Manual do utilizador 42
Руководство пользователя 46
Contents
2©2017 DJI All Rights Reserved.
EN
Disclaimer and Warning
Congratulations on purchasing your new DJI™ product. The information in this document affects your safety and your legal rights and
responsibilities. Read this entire document carefully to ensure proper conguration before use. Failure to read and follow instructions and
warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in
the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI. For up-to-date product
information, please visit www.dji.com.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to
abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for
any consequences thereof. You agree to use this product only for purposes that are propeller and in accordance with all applicable laws,
rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. Users shall
observe safe and lawful practices including, but not limited to, those set forth in the document.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its afliated companies. Names of products, brands,
etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies.
Introduction
The MAVICTM Propeller Cage is used to effectively protect people and objects from spinning 7728 Quick-Release Folding Propellers.
In the Box
Ensure to unfold the frame arms before mounting the propeller cages. DO NOT fold the frame arms with the cages on.
Always conrm propeller cages are mounted in the Main Controller Settings->Advanced Settings of the DJI GO™ 4 app after
installation.
DO NOT touch the spinning propellers even with the propeller cages on.
Please use DJI 7728 Quick-Release Folding Propellers with the propeller cages.
Propeller cages may be damaged through impact if ight speeds exceed 2.68mph (1.2m/s). Tripod Mode is recommended
when propeller cages are in use.
Assembling the Propellers
Install the propeller cage by following the steps below.
1. Open the lock underneath the propeller cage. Attach the propeller cage marked with a 1 onto the right front frame arm. Make sure that
the motor on the frame arm is fully contained.
Securing Lock × 2 7728 Quick-Release Folding Propeller Pair × 3Propeller Cage × 4
©2017 DJI All Rights Reserved. 3
EN
Right Front Frame Arm
(1) Left Front Frame Arm
(2)
Left Rear Frame Arm
(3)
Right Rear Frame Arm
(4)
Each propeller cage is marked with a number underneath. 1 refers to right front frame arm, 2 to left front frame arm, 3 to left rear
frame arm and 4 to right rear frame arm. DO NOT mix them.
2. Snap the lock shut. When you hear the click, it is tightly secured. Repeat steps 1 to 2 for the propeller cage marked 4 on the right rear
frame arm.
3
Click
1
2
3. Use the securing lock to link two cages by connecting the underneath of the propeller cage marked 1 and the top of the propeller cage
marked 4, as shown below.
4. Repeat steps 1 to 3 to install the propeller cages on the left side.
4©2017 DJI All Rights Reserved.
EN
2. Insert the propeller from the open slot at the top of the propeller cage and press the propeller down onto the mounting plate. Then while
holding the motors, rotate the propeller in the lock direction until it is secured in its position.
3. Unfold the propeller blades. Repeat steps 2 to 3 to attach remaining propellers.
Attaching the 7728 Quick-Release Folding Propellers
1. Attach the white ringed propellers to the mounting base with white marks. Attach the other pair of propellers to the mounting base
without marks.
EN
The Mavic Propeller Cage should be installed before the 7728 Quick-Release Folding Propellers.
Be aware of ight speed even when using propeller cages.
Put securing locks in the right place when not in use.
Be wary of injury when installing propeller cages.
Specications
Propeller Cage
Weight (Single One) 45 g
Radius 103 mm
Securing Lock
Weight (Single One) 0.57 g
Propellers
Diameter × Thread 7.7 × 2.8 inch (19.6 cm × 7.1 cm)
Weight 6.5 g
This content is subject to change.
Download the latest version from
http://www.dji.com/mavic
MAVIC and DJIare trademarks of DJI.
Copyright © 2017 DJI All Rights Reserved.
6© 2017 大疆创新 版权所有
CHS
免责声明和警告
感谢您购买 DJITM 产品。本文所提及的内容关系到您的安全以及合法权益与责任。使用本产品之前，请仔细阅读本文以确保已对产品进行正确
的设置。不遵循和不按照本文的说明与警告来操作可能会给您和周围的人带来伤害，损坏本产品或其它周围的物品。本文档及本产品所有相
关的文档最终解释权归大疆 TM 创新（DJI）所有。如有更新，恕不另行通知。请访问 www.dji.com 官方网站以获取最新的产品信息。
一旦使用本产品，即视为您已经仔细阅读免责声明与警告，理解、认可和接受本声明全部条款和内容。您承诺对使用本产品以及可能带来的
后果负全部责任。您承诺仅出于正当目的使用本产品，并且同意本条款以及大疆创新（DJI）制定的任何相关条例、政策和指引。
大疆创新（DJI）对于直接或间接使用本产品而造成的损坏、伤害以及任何法律责任不予负责。用户应遵循包括但不限于本文提及的所有安全
指引。即使存在上述规定，消费者权益依然受当地法律法规所保障，并不受本免责声明影响。
DJI 是深圳市大疆创新科技有限公司及其关联公司的商标。本文出现的产品名称、品牌等，均为其所属公司的商标或注册商标。
简 介
MAVICTM 桨叶保护罩（全封闭版）搭配 Mavic 7728 快拆式螺旋桨使用，更大程度防止螺旋桨划伤人或物体。
物品清单
务必展开机臂后再安装桨叶保护罩。一旦安装桨叶保护罩后，切勿折回机臂。
桨叶保护罩安装后，务必按照如下步骤于 DJI GO™ 4 App 中打开桨叶保护罩开关：飞控参数设置 > 高级设置 > 打开全封闭桨保
护罩开关。
装上桨叶保护罩后，切勿用手抓取或伸入工作中的桨叶保护罩。
请务必配合 7728 快拆式螺旋桨使用。
飞行器安装桨叶保护罩后，当碰撞速度超过 1.2m/s 时，可能会导致保护罩损坏，推荐在三脚架模式下使用保护罩。
安装桨叶保护罩
请按照如下步骤安装桨叶保护罩。
1. 首先掰动塑料锁扣，使其充分展开。然后按照图示将塑料锁扣底部印有数字 1的桨叶保护罩套住右前机臂电机。
保护罩固定扣 ×2 7728 快拆式螺旋桨一对 ×3桨叶保护罩 ×4
© 2017 大疆创新 版权所有 7
CHS
右前机臂
（1）
右后机臂
（4）
左后机臂
（3）
左前机臂
（2）
桨叶保护罩底部印有数字，其中数字 1 对应右前机臂，2 对应左前机臂，3 对应左后机臂，4 对应右后机臂。请对应机臂安装，切勿混用。
2. 扣上塑料锁扣，听到“咔”的一声，确保安装牢固。重复步骤 1到2将底部印有数字 4的桨叶保护罩安装于同侧后机臂上。
3
咔
1
2
3. 安装完毕后，用保护罩固定扣将前机臂桨叶保护罩下端与后机臂保护罩上端扣住进行固定，如图所示。
4. 重复步骤 1-3 完成另一侧桨叶保护罩的安装。
8© 2017 大疆创新 版权所有
CHS
安装 7728 快拆式螺旋桨
1. 带有白环的螺旋桨对应带白色标记的电机，未带白环的螺旋桨对应无白色标记的电机。
2. 将螺旋桨从桨叶保护罩上方开口放入，使螺旋桨下方的凸出部分与电机上方安装口对齐，一只手从桨叶保护罩侧面固定电机，另一只手用
力向下压并沿锁紧方向旋转直至锁紧。
3. 展开桨叶。并重复步骤 2-3 安装其余螺旋桨。
Inhaltsverzeichnis
Sprachen:
