3
ABOUT THE PRODUCT
ӹTester for checking personal grounding before entering an ESD protected area
(EPA)
ӹTesting footwear system and wrist strap/groundable ESD smock system at the
same time
ӹCan be used to test a groundable ESD smock system
ӹTest result indication with LED light and sound
ӹSelectable test modes: Footwear sytem test only, or footwear system and wrist
strap/groundable ESD smock system combined test
The AIJGO-22/COMP is an easy-to-use tester for checking personal grounding before
entering an ESD protected area (EPA). High load-bearing construction, it may be a
good choice if speed and security are important factors due to the large number of
entrances. Tester with LIGHT BAR system – such AIJGO products have a steel touch
button, the measured results are indicated by LED lights. COMPLEX type – these
testers are supplied built-in in an entrance gate with turnstile. The type of test can
be changed according to the entrance regulations: only footwear system test or
the combined test of the footwear system and wrist strap/groundable ESD smock
system. Thanks to the dual foot electrode, the tester simultaneously measures the
resistance of the right and left foot relative to the hand. In the event of a power
disconnection, the gate automatically drops down its turnstile to allow free passage.
The tester is supplied with manufacturer’s calibration certicate, platform, double
dual foot electrode,and entrance gate with turnstile.
CE declaration
We declare that the AIJGO-22/COMP product complies with the requirements of IEC
61340-5-1, ANSI/ESD S20.20 and Directive 2001/95/EC (General product safety).
