DLoG XMT 5/7 Bedienungsanleitung

DLoG XMT 5/7

DLoG XMT 5/10

Manual V1.00

This manual contains a detailed description of the product and we have made every effort to make it as

accurate as possible. However, this is not a guarantee of the features or the functionality of the product.

We reserve the right to modify the contents of this document at any time and without prior notice.

Because we at DLoG are constantly striving to improve this product, we cannot guarantee that previous

or subsequent releases of the product will correspond in every respect with the product description

given in this manual.

DLoG GmbH assumes no liability for technical inaccuracies, typographic errors or faults in this

documentation. DLoG GmbH also assumes no liability for damages caused directly or indirectly by the

delivery, performance or usage of this material.

The software and hardware designations used in this documentation are in most cases also registered

trademarks and are thus subject to law.

Windows® is a registered trademark of Microsoft Corporation in the United States (US) and other

countries.

This documentation is protected by copyright. Duplication, in whole or in part, is not permitted without

prior written approval of DLoG GmbH!

Title of documentation: User’s Manual DLoG XMT 5

Documentation completed on: 11/26/2010

Version: V1.00

DAN 885250E

DLoG GmbH

Industriestraße 15

D-82110 Germering, Germany

Technical customer support

If you experience technical difficulties, please

consult your distributor or contact the technical

services department at DLoG’s headquarters:

(+49) 89 / 41 11 91 0

www.dlog.com

Tabel of Content

1.About this manual..................................................................................1

1.1.For qualified personnel..............................................................................................1

1.2.Keep this manual.......................................................................................................1

1.3.Design method .......................................................................................................... 2

1.3.1.Risk of injury or death........................................................................................2

1.3.2.Danger of property damage ..............................................................................2

1.3.3.Hints ..................................................................................................................3

1.3.4.Additional design elements ...............................................................................3

2.Basic safety guidelines..........................................................................4

2.1.Safety.........................................................................................................................4

2.2.Initial operation of the device.....................................................................................4

2.3.Power supply / External devices ...............................................................................6

2.4.Repairs only through DLoG.......................................................................................6

2.5.CE Marking................................................................................................................7

2.6.RTTE Directive 1999/5/EC........................................................................................7

2.7.1Special rule/restriction.......................................................................................8

2.7.FCC user information ................................................................................................9

2.7.1.Interference declaration of the Federal Communications Commission ............ 9

2.7.2.Transmission of radio frequencies ..................................................................10

2.8.Intended usage........................................................................................................11

3.Device description ...............................................................................12

3.1.DLoG XMT 5 Models...............................................................................................12

3.2.Abbreviations used for devices and accessories ....................................................12

4.Unpacking the device..........................................................................13

4.1.Scope of delivery.....................................................................................................13

4.2.Packaging................................................................................................................13

4.3.Returning your device..............................................................................................13

5.Bootloader.............................................................................................14

6.Operating System.................................................................................14

7.Memory Management...........................................................................15

7.1.NOR-Flash Memory.................................................................................................15

7.2.NAND-Flash Memory...............................................................................................16

7.3.CE Image (Backup/Restore)....................................................................................17

7.3.1.How to create an Image Backup file................................................................17

7.3.2.How to restore an Image Backup file...............................................................20

7.3.3.Manual interaction (Generic-Boot-Mode) image .............................................23

7.4.Generic-BootMode CE Image operation .................................................................26

7.4.1.Reset of the OSInstall Flag..............................................................................27

8.DLoG neXt Config.................................................................................29

8.1.Overview..................................................................................................................29

8.1.1.Display brightness, automatic switch-off etc. configuration.............................29

8.1.2.Dialogue in neXt Config.EXE in portrait or landscape format .........................29

8.1.3.Saving neXt Config.EXE settings ....................................................................29

8.1.4.Starting neXt Config.EXE ................................................................................29

8.1.5.neXt Config Menu Bar .....................................................................................31

8.2.“Options” menu ........................................................................................................32

8.2.1.Backlight Control..............................................................................................32

8.2.2.Set Front Keys.................................................................................................34

8.2.3.Allocating Front Keys with Functions...............................................................38

8.2.4.Switch-off Automatic........................................................................................44

8.3.“Advanced” menu.....................................................................................................48

8.3.1.Change Mode ..................................................................................................48

8.3.2.PIC Environment ÆChange EEPROM Data .................................................50

8.3.3.Exit...................................................................................................................51

8.4.“Info” menu...............................................................................................................52

8.4.1.About................................................................................................................52

8.4.2.System Info......................................................................................................52

8.4.3.Make Report ....................................................................................................57

9.DLoG Security Shell.............................................................................59

9.1.Overview..................................................................................................................59

9.2.Configuration of the DLoG Security Shell................................................................59

9.2.1.DLoG Security Shell Features.........................................................................62

9.2.2.Administrator Password change \ reset ..........................................................63

9.2.3.“Retrieval parameter” Program .......................................................................65

9.2.4.“Registry” Program Messages ........................................................................66

10.DLoG Admin Tools...........................................................................67

10.1.Rotate Screen......................................................................................................67

10.2.Save Registry ......................................................................................................67

11.Active-Sync (XP Professional)........................................................69

11.1.Components Required (Software).......................................................................69

11.2.Establishing Active-Sync Connection..................................................................69

12.Software / Driver Installations (.CAB Files)....................................70

12.1.CAB File Installation............................................................................................70

12.2.CAB File De-Installation ......................................................................................71

13.Storage Manager ControlPanel Applet...........................................72

14.Return packing slip..........................................................................73

Index..............................................................................................................74

List of figures

Figure 7.1: NOR-Flash Memory...................................................................................................15

Figure 7.2: NAND-Flash Memory.................................................................................................16

Figure 7.3: OS Install option symbol............................................................................................18

Figure 7.4: OS Install Settings dialogue.......................................................................................18

Figure 7.5: System message before backup ...............................................................................19

Figure 7.6: Reboot after loading/saving the .IMG file...................................................................19

Figure 7.7: Backup file successfully saved on the SD-Card........................................................20

Figure 7.8: OS Install option symbol............................................................................................20

Figure 7.9: Install Settings dialogue.............................................................................................21

Figure 7.10: System message before restore..............................................................................21

Figure 7.11: Error message: Image file is not compatible ...........................................................22

Figure 7.12: Automatic terminal reboot........................................................................................22

Figure 7.13: Reset OS Install dialogue ........................................................................................23

Figure 7.14: Error message/OS Install.........................................................................................24

Figure 7.15: Dialogue for manual OS Install Settings..................................................................25

Figure 7.16: Dialogue OS Install Settings: Direct Install ..............................................................25

Figure 7.17: DLoG Security Shell dialogue..................................................................................27

Figure 7.18: OS Install Status dialogue .......................................................................................28

Figure 8.1: Symbol for started neXt Config.EXE in the taskbar...................................................29

Figure 8.2: Set-up dialogue for display brightness.......................................................................32

Figure 8.3: Dialogue for front key settings ...................................................................................34

Figure 8.4: Front keys programming (Export) Success Message................................................35

Figure 8.5: Front keys programming (Export) ConfigFile view ....................................................36

Figure 8.6: Front key programming (import) Success Message..................................................37

Figure 8.7: Front key programming (Import - File access failed) Message .................................37

Figure 8.8: Set-up dialogue for front key programming ...............................................................38

Figure 8.9: Set-up dialogue for front key programming (Option: “Text”)......................................40

Figure 8.10: Set-up dialogue for front key programming (Option: “Program”).............................41

Figure 8.11: Set-up dialogue for front key programming (Option: “VK Codes”) ..........................42

Figure 8.12: Set-up dialogue for front key programming VK Code .............................................43

Figure 8.13: Front key programming VK Codes - Invalid Input Message....................................43

Figure 8.14: Set-up dialogue for Switch-off Automatic in neXt Config.EXE ................................44

Figure 8.15: Dialogue: Advanced – Change Mode......................................................................49

Figure 8.16: Exit neXt Config - Warning ......................................................................................51

Figure 8.17: Dialogue: Info – About.............................................................................................52

Figure 8.18: Dialogue rubric: Info – System Info – Version.........................................................53

Figure 8.19: Dialogue rubric: Info – System Info – Hardware .....................................................53

Figure 8.20: Dialogue Rubric: Info – System Info - Network .......................................................54

Figure 8.21: Dialogue rubric: Info – System Info – Temperature ................................................55

Figure 8.22: Dialogue Rubric: Info – System Info – PIC Info.......................................................56

Figure 8.23: Dialogue Rubric: Info – MakeReport – status message..........................................57

Figure 8.24: Dialogue Rubrik: Info – MakeReport – Explorerview ..............................................57

Figure 8.25: Dialogue Rubrik: Info – MakeReport – Fileview......................................................58

Figure 9.1: DLoG Security Shell: Right click – Admin Tools – Enter Admin Mode .....................59

Figure 9.2: DLoG Security Shell Dialogue: Enter Admin Password............................................60

Figure 9.3: DLoG Security Shell Dialogue: DLoG Security Shell Option.....................................60

Figure 9.4: DLoG Security Shell Dialogue: Change \ Reset Password.......................................63

Figure 9.5: DLoG Security Shell Dialogue: Enter Password .......................................................64

Figure 9.6: DLoG Security Shell Service-Dialogue: Current Password.......................................65

Figure 9.7: DLoG Security Shell Service Dialogue: Set default: .................................................65

Figure 9.8: DLoG Security Shell Service dialogue: “Restore standard password”......................66

Figure 9.9: DLoG Security Shell Service dialogue: Restart program ..........................................66

Figure 10.1: DLoG Admin Tools dialogue: Rotate Screen ..........................................................67

Figure 10.2: DLoG Admin Tools dialogue: Save Registry...........................................................67

Figure 11.1: Active Sync dialogue: Explorer – Mobile Device.....................................................69

Figure 12.1: CAB File De-Installation ..........................................................................................71

Figure 13.1: Storage Manager ControlPanel Applet....................................................................72

About this manual

1. About this manual

This manual has been designed to make using the DLoG XMT 5 as simple as possible

and provide expert assistance if problems should occur. It contains important information

on using the device safely, properly and efficiently. Adhering to the manual helps by

avoiding dangers, reducing repair costs and breakdown times and increasing the

reliability and lifespan of the DLoG XMT 5.

DLoG GmbH will not assume responsibility for any damage caused by the improper use

of the DLoG XMT 5 and/or in disregard of the instructions in this manual.

WARNING

Before transporting, assembling, and starting the DLoG XMT 5,

please read this manual carefully and follow all the safety guidelines

listed. Follow all Basic safety guidelines and the safety guidelines in

the individual chapters.

Within this manual, DLoG GmbH strives to provide all the information required for using

your DLoG XMT 5. However, because this is a versatile product that can be used in

many different scenarios, we cannot guarantee that the information contained in this

manual will cover every single aspect.

Should you require further information or if you have questions or issues needing

clarification, please contact your nearest DLoG agent or representative.

1.1. For qualified personnel

This manual was written for qualified personnel. The information is intended exclusively

to complement the expertise of qualified personnel , not to replace it.

1.2. Keep this manual

Please keep this manual in a safe place. It should always be at hand near the described

device.

DLoG XMT 5 User’s Manual V1.00 1

About this manual

1.3. Design method

1.3.1. Risk of injury or death

This symbol indicates hazards that pose a risk to life and limb (such as contacting the

power supply):

The following levels apply, denoted by the keywords DANGER, WARNING, and

CAUTION:

DANGER

There is an immediate risk of death / serious injury.

WARNING

There is a possible risk of death / serious injury.

CAUTION

Mild injury is possible.

1.3.2. Danger of property damage

These tips warn you of possible property damage:

Caution:

Property

damage

This symbol warns you of any dangers or hazards that could

potentially cause damage to the terminal or system (such as

malfunctions, data loss, equipment damage, etc.).

2 User’s Manual V1.00 DLoG XMT 5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DLoG Touch-Terminal Handbücher

DLoG

DLoG DLoG X 7 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung