DMM ASCENT Bedienungsanleitung
1.
2.
3.
4.
5.
User Instructions
DMM
www.dmmwales.com
Climbing and Mountaineering Helmet
EN 12492
1. Shell.
2. Headlamp attachments.
3. Headband adjustment.
4. Chin strap and nape adjustment.
5. Chin strap buckle and adjuster.
Explanation of Safety Label
DMM: Manufacturer
EN 12492: European Standard - Climbing and Mountaineering Helmet
DMM International Ltd.,
Llanberis, Gwynedd, LL55 4EL, Wales, U.K.
Tel: 01286 872222, Fax: 01286 872090
F326/QA/4/Mar. 2010
Keep this leaet for your own records. The owner is obliged to complete this information immediately after purchase.
Issued To (User Name):
Date + Place of Purchase:
Date of Issue: Date First Used:
Model Code: Batch Number:
Date Inspected Comments / Action Pass ? (Yes / No) Signature
EN 12492
Size: 54/62 cm
Weight: 365 grams
Production Date: e.g. Year
e.g Quarter
DMM
1°
2010
2° 3° 4°
Model: Ascent
Diagram 1
EN 12492
Size: 48/57 cm
Weight: 320 grams
Production Date: e.g. Year
e.g Quarter
DMM
1°
2010
2° 3° 4°
Model: Kids Ascent
Manufacturer’s Instructions, Service and Maintenance Notice (“User Instructions”).
IMPORTANT: Please read and understand this information before use.
Please retain this information for future reference.
General Information:
(1) This product is classied as a rock climbing and mountaineering helmet. It cannot be used for any other kind of sport.
(2) Immediately before every use, visually/functionally inspect to ensure that this helmet is in a serviceable condition and operates
correctly. The shell should have no cracks or deformities. The attachment points of headband to the shell, and the chin strap and
headband adjustment should be inspected. We recommend a thorough inspection at least once a year by a competent person (this
may be the manufacturer). This inspection should be recorded on the inspection form supplied.
(3) Lives depend upon your equipment. The user should be fully aware of its history (use, storage, inspection etc.). If this equipment
is not for personal use (e.g. used in mountaineering centres) we strongly recommend a systematic approach to record keeping.
This should always be carried out by a competent person.
(4) WARNING: if you are in any doubt whatsoever about the safe condition of this helmet REPLACE IMMEDIATELY.
(5) It is the user’s responsibility to ensure that he/she understands the correct and safe use of this helmet.
(6) This helmet is designed for use in normal climatic conditions (-20°C to +35°C).
(7) This helmet is constructed so that the energy of an impact may be absorbed through its partial destruction; though the damage
may not be visual. IF IT SUFFERS SUCH AN IMPACT THE HELMET SHOULD BE DESTROYED AND REPLACED
(8) No responsibility will be accepted by DMM for damage, injury or death resulting from misuse. If in doubt contact DMM. There
is no substitute for instruction by a trained and competent person.
(9) No special transportation precautions are necessary; however, avoid all contact with sharp objects, chemical reagents or other
corrosive substances, and avoid crushing the helmet. Do not sit on the helmet.
(10) WARNING: do not apply stickers or paint to the helmet. They may contain substances that signicantly affect the strength of
the helmet.
Maintenance and Servicing:
Note: this helmet is not user maintainable with the exception of disinfection and cleaning as detailed below.
(11.1) Disinfection/Cleaning: if soiled rinse in clean warm water of domestic supply quality (maximum temperature 30°C) with mild
detergent at appropriate dilution (pH range 5.5 - 8.5). Dry naturally away from direct heat.
(11.2) Storage: after any necessary cleaning store unpacked in a cool, dry, dark place in a chemically neutral environment away
from excessive heat or heat sources, high humidity, sharp edges, corrosives or other possible causes of damage. Do not store
wet.
(11.3) Life Span and Obsolescence: it is very difcult to estimate this due to local use and storage conditions but a conservative
estimate would be 5 years. However, the following may reduce the life span of this product:-
Impact / Chemical Contamination / Heat Contamination (above normal climatic conditions) / Mechanical Deformation &/or Distor-
tion / General Wear / Corrosion / Heavy &/or continues use.
(12) European Union Type Examination :
EU type examination for this product is carried out by Notied Body No. 0497:-
C.S.I., Milano, Italy
NOTE: These instructions and information are designed to cover the requirements of annex 11b of European Directive 89/686/EEC
relating to Personal Protective Equipment (P.P.E.). Some of the information hereon may seem irrelevant but we are required under
the aforementioned Directive to provide this information to the user of this product.
Adjuster in locked position
Diagram 2
Diagram 3
Fitting the helmet
The headband adjuster wheel is
turned to t the headband to the head.
See diagram 2.
The Y-chin strap can be adjusted for-
wards and backwards, and locked.
See diagram 3.
The chin strap buckle must be
adjusted and locked together under
the chin.
The t of the helmet on the head
should be comfortable, secure and
stable.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere DMM Motorradzubehör Handbücher
Beliebte Motorradzubehör Handbücher anderer Marken
SRC
SRC B-TRK502-01-01-SL Bedienungsanleitung
3M
3M Speedglas 9100 MP Bedienungsanleitung
hepco & becker
hepco & becker 6307520 00 01 Bedienungsanleitung
HOMCOM
HOMCOM AA0-077 Bedienungsanleitung
hepco & becker
hepco & becker 6307558 00 01 Bedienungsanleitung
Wunderkind Custom
Wunderkind Custom 106503-F15 Benutzerhandbuch
