DMPS DMP3000 Bedienungsanleitung
DMP3000
Manual
Vol. 1.7
Update2012.07.03
INITIAL DISPLAY AND FUNCTION
1. SETTING DISPLAY AND FUNCTION
1) DISPLAY:
PRESS SET KEY OVER 3 SECONDS.
2) MENU MOVING :
PRESS SET KEY AND CHOOSE THE SETTING MENU.
3) SETTING :
PRESS +/- AND CHANGE. WHEN THE PRESS OVER.
F-B SET : BACKWARD SPEED. SETTING BY +/- KEYS.
B-F SET : FORWARD SPEED. SETTING BY +/- KEYS.
HEAD C/L : THE TIMING RANGE IS 1HOURS~99HOURS.
IN CASE OF THE “-”, THE HEAD CLEANIN IS
TURN OFF STATUS.
LAMP SAFE : THE HALOGEN LAMP IS TURN OFF,
WHEN THE PRINTING IS STOPPED OVER THAN
THE PRINTING SETTING TIME,
WHEN THE SETTING THE TIME ITS AUTOMATICALLY
TURN ON/OFF BY PRINTING READY/PRINING FINISH.
“-”ON DISPLAY, THE HALOGEN LAMP IS NOT
CONTROLLED. (KEEP THE TURN OFF STATUS)
*WHEN THE USER WANTS TO CONTROLL THE HALOGEN LAMP,
PRESS ON 1.
AUTO TIME : IT MEANS ‘AUTO PRINT TIME’, WHEN THE DATA
SEND BY PC, AND THE PRINTING IS READY THE
PRINTING IS AUTOMATICALLY PROGRESSING BY
SETTING TIME.
FEED TYPE : WHEN THE SET THE AUTO / DIRECT.
AUTO TIME IS ON AVAILABLE, IT IS WORKING WITH
AUTOMATICALLY HEIGHT CONTROLL(AUTO) OR
WITHOUT AUTOMATIC HEIGHT CONTROLL(DIRECT)
*WHEN THE SET THE AUTO MIME AS “-” THE FEED TYPE IS
NOT INFLUNCED.
*TIP
PRESS AT THE SETTING DISPLAY, THE SPEED OF FORWARDING,
BACKWARDING IS CHANGED. TO MAKE SURE THAT CONFIRM,
SET THE SAME THE SAME SPEED OF F-B, / B-F SET AT THE
TURN OFF STATUS AND CHECK THE MOVING.
2. LED DISPLAY
1) POWER DISPLAY :
IT INDICATES PRINTING STATUS AS RINTING READY.
WHEN ITS TURN OFF IT MEANS THE PRINTING IS
PROCESSING.
2) SET DISPLAY :
WHEN THE CHANGE THE SETTING MEASUREMNET.
IN OTHER CASE, ITS TURN OFF.
3) INK :
IT INDICATES INK STATUS, AND HEA CLEANING
MOVEMENT.
4) PAPER :
IT INDICATED IN INITIAL PRINTING STATUS,
PRESS (6) OR (7) AND BEGIN TO PRINT. IT ALSO
INDICATES ON LOCK DISARM.
5) INK + PAPER :
WHEN THE 2 LED IS PARKED, THE PRINTING COULD
BE ERROR. PRESS TURN OFF AND RESTART.
3. BUTTON FUNCTION
1) PRINTER POWER :
(1) BEGIN THE PRINTER AT THE POWER ON STATUS.
THE BUTTON FUNCTION IS AVAILABLE DURING
THE INITIAL MOVING DRIVED PROCESS.
(2) WHEN THE PRINTER IS TURN ON, IT CONTROLL
THE HALOGEN LAMP`S TURN ON / OFF
(3) ON SETTING DISPALY, IT DISPLAYS THE MOVING
DIRIVE STATUS AND IT IS NOT DISPALY IT THE
MOVING DRIVE STATUS WHEN THE PRESS AGAIN.
2) FORWARDING :
THE FLATBED IS FORWARDING ON THE BACKWARDING
SATUS.
IT STOPPED WHEN PRESS AGAIN.
3) BACKWARDING :
THE FLATBED IS BACKWARDING ON THE FORWARDING
SATUS.
IT STOPPED WHEN PRESS AGAIN.
(1) IT MOVES AS A ITS LENGTH ON TURN OFF THE
PRINTER (PRINTING READY LOCATION)
(2) IT MOVES TO HEIGHT LOCATION AT TURN ON
PRINTER
4) UP :
IT MOVES UP MANUALLY. MOVING TO HEIGHT UP
SENSOR IS RECOGNIZED.
5) DOWN :
IT MOVES DOWN MANUALLY. MOVING TO HEIGHT
DOWN SENSOR IS RECOGNIZED.
6) AUTO / PAUS / CANCEL
AUTO :
BEFORE THE PRINT, CONTROLL THE HEIGHT AND
MOVES TO PRINT READY.
PAUSE :
DURING THE PRINT, CONTROLL THE STOP.
PRESS PAUSE (7) WHEN YOU PRINT AGAIN.
CACEL :
DURING THE PRINT, CONTROLL THE CACEL,
PRESS 5 SECONDS.
SET :
POWER ON. PRESS 3 SECONDS, IT IS SETTING MODE,
ESCAPE AT PRESS 3 SECONDS AGAIN AND SAVE.
PRESS SHORT AND THE MOVE TO SETTING MENU
ON THE SETTING DISPLAY.
(+) :
CHANGE THE SETTING NUMBER MEASUREMENT.
PRESS, THE NUMBER IS INCREASING,
PRESS CONTINUALLY, THE NUMBER IS FASTER
CHANGING.
(-) :
CHANGING THE SETTING NUMBER MEASUREMENT
PRESS, THE NUMBER IS DECREASED,
PRESS CONTINUALLY, THE NUMBER IS FASTER
DECREASING.
HEAD CLEANING :
PRESS 3 SECONDS, THE HEAD CLEANING IS DOING.
LOCK DISARM :
PRESS 5SECONDS, THE CARRIAGE LOVCK IS TO BE
DISARMED. WHEN IT USED FOR TOTALLY CHECKING
OR PART CHANGING, POWER MUST TURN OFF.
INITIAL DISPLAY AND FUNCTION
1.1 User Notice
Printer head
If the printer head crach or touch with the substrates during the printing, the surface of the printer
head should be demaged it caused to the short term used. If so then the ink is not coming out
nevertheless carrying out the head cleaning, the printerhead should be broken. So please check the
height between the printer head and substrates before the printing.
If the printrhead broken you have to check if you can x if not you should be replace
the new printer head. So please carefully check this
Printer opertion
The printer operation parts including the carriage, X lm, plastic roller which are controls
by carriage motor
Please do not drop the hair, cloth, or accessories into the motor
Ink part
The ink ow is ultimate ink bottle, ink tube, damper, printerhead, cleaning station and waste ink nottle.
Please careful if the ink is not paint to the cloth or hand. In case of the dye ink is not easily clean.
If your hand painted by ink, please clean by alchol or water. If the ink drop in the eye,
please go to the hospital.
Ink split
The ink can be split from the substrates, and it is getting dirty to the carriage, shaft pole or X lm.
Particullay, if the ink split to the x lm the printing is not normal and it needs cleaning it is same
as y encoder at the backside of the printer.
In case of the carriage pole, the cleaning is by lubricant oil. In case of the X lm or Y encoder lm,
the cleaning is making by methyl alcohol.
Restricted Document USER MANUAL
Document Number : DMPQ-English1204-M-DMP3000-V1.1 Page 1-1
Restricted Document ⓒ2005-2012 DMPS CO.,Ltd. All rights reserved
1.2 Setting place
Please remind that the below space needs to have for the printer setting and available to using.
Please you have to have this space in case of the substrates is big size.
The setting place secured to the available place when the atbed is going and back.
To work efciencely, you need to have a space which people can pass
We do not recommend you to set up the printer as following place
A) High temperature and high humidity
B) Too much dust or garbage
C) Direct light place
D) Magnetic or Strong possible magnetic
E) Unstable horizontal
F) Vibration or impact
G) No ventilation or air condition front
H) Temperature below than 15, the humidity below than 20%RH
Restricted Document USER MANUAL
Document Number : DMPQ-English1204-M-DMP3000-V1.1 Page 1-2
Restricted Document ⓒ2005-2012 DMPS CO.,Ltd. All rights reserved
Restricted Document USER MANUAL
Document Number : DMPQ-English1204-M-DMP3000-V1.1 Page 1-3
Restricted Document ⓒ2005-2012 DMPS CO.,Ltd. All rights reserved
1.3 Printer cable connecting
There are 3 power cable connecting parts at the behind of the
printer head.
Top the upper, main power. At the left, heating atbed,
At the right, halogen lamp. Please conncet the power cable
accordingly
Please connect the cable as above picture.
If you conncet the only main power,
the printer is normally operating.
There are 4 holes which can be connected with USB cable
The upper left hole which USB cable is not connected.
The upper right hold which short USB cable
(automatic recognize) connected to the bottom right hold.
The bottom left hole computer which printer connecting
long USB cable is connected.
As shown the above picture,
the short and round USB cable
position and the long USB cable’s
position between printer and computer.
2.1 EPSON driver installation and remove
EPSON DRIVER Installation
We provide you the DMP3000 DMPS CD. When you go to the 08. DMP3000 printer driver folder,
there are 32Bit and 64Bit. You can install as accordingly
If you check folder there are 1. R2880_driver folder and check to see the icon
SETUP.EXE le,
please double click,
As you can see the above shown picture as EPSON Stylus Photo R2880, please Ok,
Next step, you can nd the SEIKO EPSON
CORPORATION. Please accept,
This window shortly appears and disappears.
Restricted Document USER MANUAL
Document Number : DMPQ-English1204-M-DMP3000-V1.1 Page 2-1-1
Restricted Document ⓒ2005-2012 DMPS CO.,Ltd. All rights reserved
2.1 2-1. EPSON DRIVER INSTALLATION & ELIMINATION
EPSON driver installation
When this page appear, you wait a while by pressing
the power button of printer to automatically set the
printer port.
Automatically setting the printer port, and you can
nd it in the control panel that the printer icon has
been created in Printer & Fax folder.
When the installation is complete,
you must turn off the monitor.
* It is to prevent a conict with DMPS_INK_Application
program.
Removed EPSON monitoring settings
Click Start -> Printers and Fcess to add & remove programs and seaxes
->EPSON Stylus Photo R2880 by right-click Printing Preferences
Click Settings window will pop up above
Photos – all checked box should be clear, and then click OK.
Removed EPSON driver
When removing the driver from the Control Panel, aclect
EPSON printer software, then it will be deleted by pressing
change&remove button.
Restricted Document USER MANUAL
Document Number : DMPQ-English1204-M-DMP3000-V1.1 Page 2-1-2
Restricted Document ⓒ2005-2012 DMPS CO.,Ltd. All rights reserved
2.2 DMPS Application installation and uninstallation
There is a CD supplied from DMPS at the time of installation of DMP3000 printer.
You can nd 32Bit and 64Bit folder at the DMP3000 printer driver folder.
They are installed according to computer specications.
If you check inside the folder, there is DMP3000 program folder.
Ver4.2_DMPS_INK_SETUP_Application.exe icon will be installed.
Restricted Document USER MANUAL
Document Number : DMPQ-English1204-M-DMP3000-V1.1 Page 2-2-1
Restricted Document ⓒ2005-2012 DMPS CO.,Ltd. All rights reserved
2.2 DMP3000 APP PROGRAM INSTALLATION
After nishing No.6 , DMPS INK RESET Application icon will be created on the desk top.
If you execute the icon one window will appear.
First, press refresh button.
Select the EPSON Stylus Photo R2880,
and Resetter ID Input button is pressed,
the installation is completed successfully.
Note! Please do not press the EXIT button.
When turning the computer the installation
program will automatically appear.
You do not press the EXIT button also and just press the X (close) at the top of the right.
When removing the driver from the Control Panel, access to add&remove program and select
DMPS Application then it will be deleted by pressing change&remove button.
Restricted Document USER MANUAL
Document Number : DMPQ-English1204-M-DMP3000-V1.1 Page 2-2-2
Restricted Document ⓒ2005-2012 DMPS CO.,Ltd. All rights reserved
Inhaltsverzeichnis
