DMT Presenter Control Bedienungsanleitung

PRESENTER CONTROL

ORDERCODE 100801

Congratulations!

You have bought a great, innovative product from DMT.

The DMT Presenter Control brings excitement to any venue. Whether you want simple plug-&-play action

or a sophisticated DMX show, this product provides the effect you need.

You can rely on DMT, for more excellent lighting products. We design and manufacture professional light

equipment for the entertainment industry. New products are being launched regularly. We work hard to

keep you, our customer, satisfied.

For more information:iwant@dutchmediatools.info

You can get some of the best quality, best priced products on the market from DMT. So next time, turn to

DMT for more great lighting equipment.

Always get the best -- with DMT !

Thank you!

DMT

DMT Presenter Control™Product Guide

Warning..…...................................................................................…………………………………………....................

Safety-instructions…………………………………………………………………………………………......................

Operating Determinations…………………………………………………………………………………...................

Description..…..............................................................................……….…………………………………..................

Features…….……………………………………………………………………………………….……...…...................

Overview………………………………………………………………………………………………………...................

Backside………………………………………………………………………………………………………....................

Installation...............................................................................…...…………………………………….…......................

Set up examples....................................................................................................................................................

Programming the device......................................................................................................................................

Controlling a projector with the PC using the remote terminal.......................................................................

Controlling a projector with the PC using IR.......................................................................................................

Controlling an electric projection screen with the PC......................................................................................

Controlling light with the PC.................................................................................................................................

Switch detection with the PC...............................................................................................................................

Controlling audio equipment...............................................................................................................................

Controlling video equipment...............................................................................................................................

Controlling VGA equipment.................................................................................................................................

MIC input and audio input...................................................................................................................................

Infrared transmission.............................................................................................................................................

Software installation.................................................................................................................................................

Running the set up program................................................................................................................................

Curriculum schedule............................................................................................................................................

Projector setup......................................................................................................................................................

Serial port control..................................................................................................................................................

Requirements for the RS232 code.......................................................................................................................

IR remote control...................................................................................................................................................

DVD IR remote control..........................................................................................................................................

Saving the setup....................................................................................................................................................

Sending the program to the host........................................................................................................................

Maintenance...................................................................................………..………….…….……………....................

Troubleshooting............................................................................………………….………………….….....................

Product Specifications.................................................................……………….…….………………….....................

Appendix 1: Pin definition of programming cable and Infrared learning cable...............................................

Appendix 2: Block diagram....................................................................................................................................

Appendix 3: ASCII table...........................................................................................................................................

WARNING

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

• DMT Presenter Control

• User manual

• 2 stereo audio cables 3,5mm jack –1,4m –3,5mm jack.

• 3 stereo audio cables 3,5mm jack - 1,4m –RCA.

• 2 Programming/ communication cable.

• 1 IEC power cable.

• 1 IR-emitting LED.

• 1 CD-Rom containing remote software.

• 1 Wireless remote control.

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

1) Your name

2) Your address

3) Your phone number

4) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

otherwise agreed in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the

invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement of which the obligation is resulting.

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

-be qualified

-follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-

observance of this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Never leave any cables lying around.

Do not open the device and do not modify the device.

Do not connect this device to a dimmerpack.

Do not switch the device on and off in short intervals, as this would reduce the system’s life.

Only use device indoor, avoid contact with water or other liquids.

Avoid flames and do not put close to flammable liquids or gases.

Always disconnect power from the mains, when device is not used or before cleaning! Only

handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.

Make sure that the device is not exposed to extreme heat, moisture or dust.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the device and the power-

cord from time to time.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your device. Leave

the device switched off until it has reached room temperature.

If your DMT device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your DMT dealer for service.

For replacement use fuses of same type and rating only.

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

OPERATING DETERMINATIONS

If this device is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash

etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Description of the device

Features

The Presenter Control is used for switching one of six program sources to a beamer or large screen and

at the same time enabling remote control and/ or automated control of several functions. The presenter

control is easy to operate. It is therefore ideally suited to be used in conference rooms, multimedia rooms,

college or classrooms.

AC 90-230V - 50-60Hz

Combined 6 x 1 VGA/ video - audio matrix switching module.

6.3mm jack MIC input.

2 x Video out (RCA).

2 x RGB out.

Audio out (stereo 3,5mm mini jack).

2 x RS232 interface.

Control panel interface.

2 x door detection input.

Remote control interface.

IR interface.

3 x programmable power socket.

Analog control output (0-10V).

Fig. 1

Overview

Remote

Fig. 2

1) Computer.

Pressing this button enables you to select the computer input. The LED will light if the computer input is

selected.

2) DVD.

Pressing this button enables you to select the DVD input. The LED will light if the DVD input is selected.

3) Aux 1.

Pressing this button enables you to select the Aux 1 input. The LED will light if the Aux 1 input is

selected.

4) IR receiver.

Use in combination with an infrared remote control.

5) System ON.

If the button is pressed, the system will turn on the power supply for other connected devices. By

factory preset the device will turn on the aux power socket, the projector power socket, the amplifier

power socket, lower the projection screen and dim the light in the room in sequence. After a

programmable amount of time, the projector will start up. While starting up, the system indication

LED’s will blink alternately.

6) System indication LED’s

7) System OFF.

If the button is pressed, the system will send a stop code to the projector via the control interface,

hoist up the screen, and cut off the power supply to the amplifier and other devices in sequence. The

projector will stop after a programmable amount of time.

8) Aux 2.

Pressing this button enables you to select the Aux 2 input. The LED will light if the Aux 2 input is

selected.

9) VCR.

Pressing this button enables you to select the VCR input. The LED will light if the VCR input is selected.

10) Master volume control.

Press the ▲button to increase the volume. Press the ▼button to decrease the volume.

11) Mic volume control.

Press the ▲button to increase the volume. Press the ▼button to decrease the volume.

12)Projector On/Off.

Pressing these button switches the (external) projector on or off.

13) Screen Up/Down.

Pressing these buttons allows you to remotely move an external screen up or down.

14) Light Up/Down.

Pressing these buttons let’s you control an external dimmer by means of an analog

control voltage (DC 0-10V).

15) Laptop.

Pressing this button enables you to select the Laptop input. The LED will light if the Laptop input is `

selected.

Front

Fig. 3

16) Projector power indicator.

Lights up if the Projector socket is active.

17) Screen down indicator.

Lights up if the screen is lowered down.

18) Power switch.

Use to turn the system on or off.

19)Power LED.

Indicates that the unit is turned on.

20) Aux power indicator.

Lights up if the Aux socket is active.

21) Amp power indicator.

Lights up if the Amp socket is active.

22) Light intensity indicator.

The Presenter Control can send a control voltage (DC 0 –10V) to an external dimmer. The intensity of

the LED is linear with the DC voltage at the light output.

Backside

Fig. 4

23) DVD video input.

Connect with S-video Out terminal of a S-video device.

24) VCR video input.

Connect with the Audio Out terminal of a S-Video/YCbCr device.

25) Aux 2 video input.

Connect with Video Out terminal of a video device.

26) Projector video output.

This output will contain the video program signal.

27) Monitor video output.

This output will continuously show the DVD output. This way the operator has a preview facility to find

the desired program material on the DVD player.

28) DVD audio input.

Connect with the Audio Out terminal of a DVD device.

29) VCR audio input.

Use the supplied adapter only.

30) Aux 2 audio input.

Connect with the audio output of a line level audio device.

31) Computer audio input.

Connect with the audio output of a PC/ laptop.

32) Laptop audio input.

Connect with the audio output of a PC/ laptop.

33) Aux 1 audio input.

Connect with the audio output of a line level audio device.

34) Master audio output.

Connect with your mixer or amplifier.

35) Mic audio input.

Jack input. Level can be adjusted by using the MIC Volume Control buttons (11).

36) Detection terminal.

Use this input to connect door switch detectors.

37) IR LED terminal.

Use to connect an Infrared LED for remote purposes.

38) Control panel

9-pole Sub D connector for connecting the control panel.

39) Light control

Control Voltage output for remote light control (0-10V).

40) Switched power sockets

Used for remote controlling of external devices.

41) IEC inlet

42) Computer VGA input.

Connect to the VGA output of a PC/ laptop. Because this input takes the computer’s VGA signal,

The computer’s monitor should be connected to the monitor VGA output (45).

43) Computer Laptop VGA input.

Connect to the VGA output of a PC/ laptop.

44) Aux 1 VGA input.

Connect to the VGA output of a PC, laptop or other VGA compatible device.

45) Monitor VGA Output.

Connect with the VGA in terminal of a monitor. This output will continuously show the computer’s VGA

signal.

46) Projector VGA Output.

Connect with the VGA in terminal of a projector. This output will contain the VGA program signal.

47) Projector RS232 terminal.

Connect with the RS232 terminal of a projector.

48) Computer serial port.

Connect with the RS232 port of your PC/ laptop to program the Presenter Control.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DMT Projektor Handbücher

DMT

DMT D315M Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung