Dnake 902M S8 Bedienungsanleitung
Model: 280SD-C12
280SD-R2
280SD-R5
Quick Start Quide
Door Station
The picture is only a schematic diagram. The actual product shall prevail.
902M S8
USER MANUAL
Please follow the user manual for correct installation and
testing. If there is any doubt please call our tech-supporting
and customer center.
Our company applies ourselves to reformation and
innovation of our products. No extra notice for any change.
The illustration shown here is only for reference. If there is
any difference, please take the actual product as the
standard.
The product and batteries must be handled separately from
household waste. When the product reaches the end of
service life and needs to be discarded, please contact the
local administrative department and put it in the designated
collection points in order to avoid the damage to the
environment and human health caused by any disposal. We
encourage recycling and reusing the material resources.
REMARK
CATALOG
Product Features......................................................1
Technical Parameters...............................................1
Package Contents ....................................................2
Pictures.....................................................................2
Operations................................................................3
1. VOIP......................................................................4
2. Security...............................................................11
3. Smart ..................................................................16
4. Service................................................................20
5. About 902 ...........................................................21
Web Settings ..........................................................22
System Configuration ............................................26
System Diagram.....................................................27
Installation..............................................................29
Troubleshooting .....................................................30
Safety Instructions .................................................31
PRODUCT FEATURES
TECHNICAL PARAMETERS
Voltage: DC 12V
POE
Rated power: 9W
Standby power consumption: 1.5W
Display screen: 7''
Touch screen: Capacitive touch screen
Resolution: 800x480
Working Temperature: -10℃ to +55℃
Storage Temperature: -10℃ to +60℃
Working Humidity: 10% to 90% (non-condensing)
1
1. Building intercom application:
VOIP: Support video call, monitoring, unlocking, VOIP
communication and call record checking.
Security: Support 8 alarm zones with 3 states, alarm zone and
scene setup.
Smart: Support smart home extension by RS485 communication.
Others: Support Android systems applications.
Voltage: DC 12V
POE
Rated power: 10W
Standby power consumption: 3W
Display screen: 7''
Touch screen: capacitive touch screen
Resolution: 1024X600
Working Temperature: -10℃ to +55℃
Storage Temperature: -10℃ to +60℃
Working Humidity: 10% to 90% (non-condensing)
RAM: 1GB
ROM: 4GB
Package Contents
Quick Start Guide
Indoor Monitor
MODEL: 902M-S8
Please make sure the package contains the following items:
Screw
PACKAGE CONTENTS
2
PICTURES
Microphone
7'' capacitive
touch screen
Speaker
3
OPERATIONS
Main menu: VOIP, Security, Smart, Service, Contacts, Calendar, Mediaplayer
and About 902.
Shortcut key: Elevator, Out, Unlock and Apps.
1.The main interface will remind user when there are missed calls, unread
MSG and SMS.
2. The state of weather is synchronously updated by NTP.
Status bar: Return, Main interface, Background program, Volume-,Volume+.
When the user enters into secondary menu, the interface displays the
following icons at the bottom of the screen.
Status bar instruction:
1. Return :Click it to return to previous menu.
2. Main interface : Click it to return to main interface.
3. Background program : Click it to display the operating program
running in the background.
5. Volume- : Click it to reduce the volume.
6. Volume+ : Click it to increase the volume.
4
Clicking “VOIP” icon on the main interface, the system will enter the
following interface:
1.1 Call
Clicking “Call” icon, the system will enter the following interface:
1.VOIP
1.1.1 Call unit resident
Input 1-3 digits building No.+ “Building” + 2-digit Unit No. + “Unit” +4-digit
room No., then click icon to call.
The system will enter into the following interface:
5
When the call is answered, the system will enter into call state:
1. If there is a camera, the caller’s image will be displayed on the screen;
2. When the call is answered, the video will be uploaded into the indoor
monitor.
When the door station, wall panel or secondary door station calls, the
indoor monitor will ring; when door station calls indoor monitor, the image
from door station will be displayed on the indoor monitor; if there is no
answer within 25 seconds, the call will be ended.
Click icon to communicate with door station; click icon to end the
call; click icon to unlock the door.
Remark: visual intercom function between households is optional.
You can make audio and video recording during communication (TF card
should be inserted into indoor monitor ). Click icon to take a snapshot of
the visitor; click icon to save the video and image for current
communication.
The system’s default call duration is 120s.
1.1.2 Call management center
Clicking “Center” icon to call management center(namely master
station), the system will call management center No.1-No.5 successively. If
the management center cannot be searched or call failed, the system will
automatically call next management center. When the management center
answers, it will ring and stop calling next one.
Click icon to end the communication.
6
1.2 Monitor
Clicking “Monitor” icon, the system will enter the following interface:
Click “Door01” icon to switch the type of door station, then click or icon
to select the area you want to monitor, and click icon to monitor the
door station or secondary door station. Click icon to end monitoring.
Click icon to unlock the door.
Remark: The system’s default monitoring time is 25s.
1.3 Records
Clicking “Records” icon, the system will enter the following interface:
7
refers to call-out record; refers to call-in record; refers to missed
call record. It can save up to 64 records.
Click or icon to search for records. Select one record and click icon
to call; click icon to delete it. Click icon to back-up.
If there is snapshot image, click icon to view it.
1.4 Room
Click “Room” icon, then input 1-16 digits password (the default password is
123456 ) to enter into the following interface:
Warning: Please revise synchronous No.(6 digits) as soon as possible after
you read the user manual. The synchronous No. of all indoor monitors in
one household must be the same.
Input the 3-digit Building No. such as 001, and then click “OK” to finish the
building No. setting.
The setting method of Unit No.,Floor No., Room No., Device No. and
Synchronous No. is the same as the one of Building No.. The Unit No., Floor
No. and Room No. are limited to 2 digits respectively. When Device No. is
set to be 0, the indoor monitor is regarded as the main; when Device No. is
set from 1 to 5, as the sub1 to sub5.
Inhaltsverzeichnis
Andere Dnake Gegensprechanlage Handbücher
Dnake
Dnake S215 Bedienungsanleitung
Dnake
Dnake S212 Bedienungsanleitung
Dnake
Dnake 280SD-C12 Bedienungsanleitung
Dnake
Dnake 280SD-C12 Bedienungsanleitung
Dnake
Dnake 905D-Y4 Bedienungsanleitung
Dnake
Dnake 902D-B9 Bedienungsanleitung
Dnake
Dnake TWK01 Bedienungsanleitung
Dnake
Dnake IPK03 Bedienungsanleitung
Dnake
Dnake A416 Bedienungsanleitung
Dnake
Dnake C112 Bedienungsanleitung
Dnake
Dnake S615 Bedienungsanleitung
Dnake
Dnake S213M Bedienungsanleitung
Dnake
Dnake S215 Bedienungsanleitung
Dnake
Dnake 302 Series Bedienungsanleitung
Dnake
Dnake 902C-A Bedienungsanleitung
Dnake
Dnake E416 Bedienungsanleitung
Dnake
Dnake 905D-Y4 Bedienungsanleitung
Dnake
Dnake 280M-S8 Bedienungsanleitung
Dnake
Dnake H618 Bedienungsanleitung
Dnake
Dnake E416 Bedienungsanleitung
