Domino Ax Series Bedienerhandbuch
(2) EPT019297 Issue 1 November 2016
THIS PAGE INTENTIONALLY LEFT BLANK
EPT019297 Issue 1 November 2016 (3)
DOMINO Ax-SERIES USER DOCUMENTATION
This user documentation, Domino Part No. EPT019297, is for use in the operation and
maintenance of Domino Ax-Series printers.
This user documentation is the official authority for the operation and maintenance of the Domino
Ax-Series range of printers. It is the source document for all translated versions. It is the “Original
Instructions” for the purposes of the Machinery Directive.
This user documentation is based on software version 01.00.15.
Users of this printer are warned that it is essential to read, understand and act according to the
information given in Part 1: Health and Safety. This part of the user documentation also specifies
a set of symbols which are used elsewhere in the user documentation to convey special warnings
or requirements. It is, therefore, essential that users are also familiar with these symbols and act
accordingly.
All rights reserved. No part of this publication may be reproduced, stored on a retrieval system, or
transmitted in any form, or by any means, electronic, mechanical, photocopying, recording or
otherwise, without the prior permission of Domino Printing Sciences plc.
Domino Printing Sciences plc. has a policy of continuous product improvement, the company
therefore reserves the right to modify the specification contained in this user documentation
without notice.
© Domino Printing Sciences plc. 2016.
For sales, service and inks please contact:
www.buydomino.com
www.domino-printing.com
Domino UK Ltd. Domino North America
Bar Hill
Cambridge CB23 8TU
England
Tel: 01954 782551
Fax: 01954 782874
1290 Lakeside Drive
Gurnee IL.60031
U.S.A.
Tel: 847 244 2501
Fax: 847 244 1421
(4) EPT019297 Issue 1 November 2016
End User License Agreement
You have acquired a device (“DEVICE”) that includes software licensed by Domino UK Ltd from
Microsoft Licensing Inc. or its affiliates (“MS”). Those installed software products of MS origin, as
well as associated media, printed materials, and “online” or electronic documentation
(“SOFTWARE”) are protected by international intellectual property laws and treaties. The
SOFTWARE is licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT USE
THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT DOMINO UK LTD
FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF
THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE
YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:
• You may use the SOFTWARE only on the DEVICE.
• NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. DOMINO UK LTD HAS
INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS
HAS RELIED UPON DOMINO UK LTD TO CONDUCT SUFFICIENT TESTING TO DETERMINE
THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.
• NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided “AS IS” and with all
faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY,
AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO
WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR
AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE
DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE
NOT BINDING ON, MS.
• Note on Java Support. The SOFTWARE may contain support for programs written in Java.
Java technology is not fault tolerant and is not designed, manufactured, or intended for use
or resale as online control equipment in hazardous environments requiring fail-safe
performance, such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines, or weapons
systems, in which the failure of Java technology could lead directly to death, personal injury,
or severe physical or environmental damage. Sun Microsystems, Inc. has contractually
obligated MS to make this disclaimer.
• No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO
LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE
SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS
ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN
EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).
• Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse
engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that
such activity is expressly permitted by applicable law notwithstanding this limitation.
• SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may permanently
transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and
only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must
also include all prior versions of the SOFTWARE.
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is of US-origin. You agree to
comply with all applicable international and national laws that apply to the SOFTWARE, including
the U.S. Export Administration Regulations, as well as end-user, end-use and country destination
restrictions issued by U.S. and other governments. For additional information on exporting the
SOFTWARE, see http://www.microsoft.com/exporting/.
EPT019297 Issue 1 November 2016 (5)
THIS PAGE INTENTIONALLY LEFT BLANK
(6) EPT019297 Issue 1 November 2016
CONTENTS OF
EU DECLARATION OF CONFORMITY
No. Doc-0010447_R02
Manufacturers name: Domino UK Limited
Manufacturers address: Bar Hill, Cambridge CB23 8TU.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Object of the declaration: Domino Ax150i, Ax350i and Ax550i Printer, from serial number
AX0000001000
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2011/65/EU : RoHS Directive
2014/53/EU : RED Directive
EN 300 330-2 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25
MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part
2: Harmonized EN covering the essential requirements of article 3.2 of the
R&TTE Directive
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity
for industrial environments
EN 61000-6-4:2007/A1:2011 Electromagnetic compatibility (EMC) – Part 6-4: Generic standards –
Emissions standard for industrial environments
EN 60950-1:2006/A2:2013 Information technology equipment – safety – Part 1: General requirements.
EPT019297 Issue 1 November 2016 (7)
(8) EPT019297 Issue 1 November 2016
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
European EMC Statement
This product may cause interference if used in residential areas. Such use must be avoided unless
the user takes special measures to reduce electromagnetic emissions to prevent interference to
the reception of radio and television broadcasts.
(10) EPT019297 Issue 1 November 2016
AMENDMENT RECORD
Amendment Date
All parts at Issue 1 November 2016
Andere Handbücher für Ax Series
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Domino Drucker Handbücher
Domino
Domino G20I Bedienungsanleitung
Domino
Domino Macrojet 2 Bedienungsanleitung
Domino
Domino A-SERIES Bedienungsanleitung
Domino
Domino C Series Bedienungsanleitung
Domino
Domino G Series Bedienungsanleitung
Domino
Domino C6000 plus Bedienungsanleitung
Domino
Domino G20I Bedienungsanleitung
Domino
Domino Ax Series Bedienerhandbuch
Domino
Domino F Series Bedienungsanleitung
Domino
Domino G20I Bedienungsanleitung
