Dormakaba Terminal 97 00 Bedienungsanleitung
Terminal 97 00
04043552 - 07/2017
EN
Technical Manual
dormakaba EAD GmbH
Albertistraße 3
78056 Villingen-Schwenningen
Germany
T: +49 (0)7720 603-0
www.dormakaba.com
Company headquarters: Heiligenhaus
Copyright © dormakaba 2017
All rights reserved.
No part of this document may be reproduced or used in any form or by any means without prior written permis-
sion of dormakaba Schweiz AG.
All names and logos of third-party products and services are the property of their respective owners.
Subject to technical changes.
04043552 - 07/2017
Table of ContentsTechnical Manual
304043552 - 07/2017 Terminal 97 00
Table of Contents
1 About this document 7
1.1 Validity 7
1.2 Target group 7
1.3 Content and purpose 7
1.4 Using the document 8
1.5 Additional documentation 8
1.6 Warnings 9
1.6.1 Hazard categories 9
1.6.2 Symbols 9
1.7 Information 9
1.8 Instructions 10
2 Basic safety information 11
2.1 Proper use 11
2.2 Assembly and installation 11
2.3 Service and maintenance 11
2.4 Accessories and spare parts 11
2.5 Electrical hazards 12
2.6 Handling of lithium batteries 12
2.7 ESD protective measures 13
2.8 Environmental protection 13
3 Product description 14
3.1 Overview 14
3.2 Technical data 15
3.2.1 System 15
3.2.2 Multimedia 15
3.2.3 Interfaces/Communication 16
3.2.4 Reader 16
3.2.5 Inputs/Outputs 16
3.2.6 Power supply 17
3.2.7 Uninterruptible power supply 17
3.2.8 Ambient conditions 17
3.2.9 Dimensions 18
3.3 Conformity 21
3.4 Marking 23
4 Construction and function 24
4.1 Device structure 24
4.1.1 Terminal housing - Front 25
4.1.2 Terminal housing - Rear side 26
4.1.3 Docking station 27
4.1.4 Interface assignment 31
4.1.5 Uninterruptible power supply UPS510 31
4.2 Product versions 32
4.2.1 Basic equipment 32
4.2.2 Optional equipment (not retrofittable) 32
4.2.3 Optional equipment (retrofittable) 32
4.2.4 Accessories 32
4.3 Terminal software 33
4.3.1 BaseApp 33
4.3.2 Kaba test program 33
4.3.3 B-Client HR30 terminal software 33
4.3.4 B-Client HR30 software options 33
4.4 System connection 36
4.4.1 Communication principle 36
Table of Contents Technical Manual
4 04043552 - 07/2017Terminal 97 00
4.4.2 Parametrization 36
4.4.3 Authorizations 36
4.4.4 Data from the terminal 36
4.4.5 Operating states 37
4.4.6 Devices with biometric reader 37
4.5 Authentication types 38
4.5.1 Mode 1: Identification 38
4.5.2 Mode 2: Verification 38
4.5.3 Mode 3: Verification (ID) 38
4.5.4 Mode 4: Combination of modes 1 and 2 38
4.5.5 Mode 5: Combination of modes 2 and 3 38
4.5.6 Alternative types of authentication 39
4.5.7 Additional PIN entry 39
4.6 CardLink 40
5 Installation 41
5.1 Installation conditions 41
5.1.1 General 41
5.1.2 Installation site 41
5.1.3 Connections 41
5.1.4 Power supply 42
5.1.5 Cable entry 43
5.2 Installation lines 44
5.2.1 24 V DC power supply 44
5.2.2 Mains voltage supply 44
5.2.3 Ethernet 44
5.2.4 Inputs/Outputs 44
5.3 Fastening the docking station 45
5.4 Connections 46
5.4.1 Connecting the network cable 46
5.4.2 Connecting the mains voltage 46
5.4.3 Mains fuses 47
5.4.4 Connecting 24 V DC power supply 48
5.4.5 Digital inputs 49
5.4.6 Relay outputs 50
5.4.7 Connecting an external reader 51
5.5 Uninterruptible power supply UPS510 52
5.6 Fasten the terminal housing to the docking station. 53
6 Commissioning 54
6.1 Network requirements 54
6.1.1 Communication 54
6.1.2 Comparing finger templates 54
6.1.3 Automatic registration via B-COMM 54
6.2 Automatic registration via B-COMM 55
6.2.1 Cancelling automatic registration 55
6.3 Manual settings 56
6.4 Settings via the Kaba test program 57
6.4.1 Service language 57
6.4.2 Reader settings 57
6.5 Service Interface 60
6.5.1 Remote access 60
6.5.2 Accessing the service interface locally from the B-Client HR30
terminal software. 61
6.5.3 Accessing the service interface locally from the BaseApp 62
6.6 Android system settings 63
6.6.1 Network settings 64
6.6.2 Settings for adjustment to the environment 67
6.7 Reader initialization 68
6.7.1 LEGIC 68
6.7.2 MIFARE (ARIOS) 69
6.7.3 MIFARE (Baltech) 69
6.8 SFTP server 70
Table of ContentsTechnical Manual
504043552 - 07/2017 Terminal 97 00
6.8.1 Preconditions 70
6.8.2 Establishing an SFTP connection 70
6.8.3 Information on the key file 71
6.8.4 Important directories and files 72
6.9 Remote setup 73
7 Operation 74
7.1 Operating elements 74
7.2 Display 74
7.3 Touch screen 74
7.4 Navigation keys 75
7.5 RFID reader 76
7.6 Biometric reader 76
7.7 Swipe reader 77
7.8 Symbols for user guidance 78
7.8.1 Function keys 78
7.8.2 Input prompt 79
7.8.3 Error states 80
7.8.4 CardLink 80
7.8.5 Finger entry 81
7.9 BaseApp 82
7.9.1 Starting the application 82
7.9.2 App management 83
7.9.3 System Information 85
7.10 B-Client HR30 terminal software 86
7.10.1 Starting the terminal software 86
7.10.2 Shutting down the terminal software 87
7.10.3 Info functions 88
7.10.4 Registering new fingerprints at the terminal 89
8 Maintenance 93
8.1 Backup battery 93
8.1.1 Battery change 93
8.2 Replacement of the uninterruptible power supply UPS510 94
8.3 Cleaning the housing 94
8.4 Installation/Update of the terminal software 95
8.4.1 Data backup 95
8.4.2 Preparing installation/update 95
8.4.3 Performing an update 95
8.4.4 Performing the installation 96
8.5 Android update 96
9 Packaging/Returns 97
9.1 Complete devices 97
9.2 Electronic components 97
9.3 Labelling 98
10 Disposal 99
Index 101
Table of ContentsTechnical Manual
604043552 - 07/2017 Terminal 97 00
About this documentTechnical Manual
704043552 - 07/2017 Terminal 97 00
1 About this document
1.1 Validity
This document describes the product:
Product designation: Terminal 97 00
Product ID: 9700-K6
Item number 04079701
Terminal software: 735-05-X-K02 - B-Client HR30
BaseApp: 771-05-X-K02
Kaba test program 797-05-X-K02
Date of manufacture: From April 2017
This document describes all product versions and all optional features and functions. Options
are subject to a charge and therefore only available if purchased. Additional features and
functions may not be available at the time the document is issued and may only be available
for purchase at a later date.
1.2 Target group
This quick start guide is intended for skilled persons only.
The descriptions are intended for skilled persons trained by the manufacturer. The descrip-
tions are no replacement for product training.
For reasons of equipment safety, the installation, maintenance and service measures de-
scribed in this documentation should only be carried out by skilled persons in accordance with
EN 62368-1 (Audio/Video, Information and Communication Technology Equipment – Part 1:
Safety Requirements).
Skilled person is the designation for people who have the appropriate technical training and
experience in setting up the equipment. Skilled persons are expected to use their training and
experience to identify any risks to themselves and others that may arise while carrying out
these activities, and to minimise these risks as far as possible. It is the skilled person’s re-
sponsibility to ensure that the conditions stated by the manufacturer and the applicable regu-
lations and standards are complied with when carrying out these actions.
This documentation is also used to provide information for persons with the following tasks:
• Project planning and implementation
• Putting the product into operation within a network
• Connecting the product to the user software by programming customer applications
• Customer-specific adjustment through parameter setting on the product
1.3 Content and purpose
Content is limited to the assembly, installation, commissioning and basic operation of the
product.
About this document Technical Manual
8 04043552 - 07/2017Terminal 97 00
1.4 Using the document
To make it easier to find specific topics, please refer to the following document guidelines:
• The contents list at the start of the document provides an overview of all topics.
• The headings also list the relevant main chapter.
• Cross-references provide the number of the chapter in which more information can be
found. Example [ 5.7].
• There is an alphabetical index at the end of the document.
1.5 Additional documentation
Specific parametrization of the terminal software:
• B-Client HR30 reference manual
Web interface for commissioning:
• Service interface reference manual
Kaba ARIOS security concept and required system adjustments for different MIFARE media:
• Kaba MIFARE adjustments reference manual
Supplementary documentation is available on the Kaba website. Technical manuals can be
found in a secured area of the website.
• Access is only granted after a valid login.
• An account must be set up before logging in for the first time.
Opening login screen:
1. Open your internet browser and go to http://www.kaba.com.
2. Choose your language in the top right-hand corner of the screen.
3. Under 'Products', choose either the 'Access Management' or 'Workforce Management'
product division.
4. In the top right-hand corner of the screen, click on the following symbol:
5. Enter your email address and password to log in or create a new account (see below).
ðThe technical manuals can be found under 'Downloads'.
Creating an account:
1. Click 'Create account'.
2. Fill in the data fields and confirm your entries.
ðA confirmation link will be sent to your email address.
3. Click on the confirmation link in your email to activate your account.
About this documentTechnical Manual
904043552 - 07/2017 Terminal 97 00
1.6 Warnings
Warnings with information, instructions and forbidden actions to prevent personal injury and
material damage are highlighted.
Please note the warnings! These are intended to help avoid accidents and prevent damage.
1.6.1 Hazard categories
Warnings are divided into the following categories:
DANGER
High risk
Designates an imminent danger resulting in serious injuries or death.
WARNING
Medium risk
Designates a potentially dangerous situation which can result in serious injuries or death.
CAUTION
Low risk
Indicates a potentially dangerous situation that can lead to minor injury.
NOTICE
Important information about the correct use of the product.
Non-adherence to the notes can lead to malfunctions. The product or something in its vicinity
could be damaged.
1.6.2 Symbols
Depending on the hazard source, the following symbols are used for warnings.
General hazard Hazard caused by electric power
Risk of explosion Risk to electronic components
caused by electrostatic discharge
1.7 Information
Notes are marked with an info symbol.
Application tips, useful information
They allow optimum use of the product and of its functions.
About this document Technical Manual
10 04043552 - 07/2017Terminal 97 00
1.8 Instructions
Structure and symbols of the instructions are illustrated in the following example:
üPrerequisite
1. Step 1
ðInterim result
2. Step 2
ðResult
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Dormakaba Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung