Rack Monitor 8800E/8801E
Document: Installation Manual
Date: 24 August 2016
Version: B.1
Page 2 of 29 Document: H71342
Disclaimer
In this document an installation manual is presented of the OPW Rack Monitor 8800E/8801E. It is important
that the end user (in many cases the operator) of the OPW Rack Monitor 8800E/8801E has an adult age, is
skilled, reads and understands this manual (and therefore has knowledge of the English language),
otherwise it is not recommended to use the OPW Rack Monitor 8800E/8801E.
OPW Fluid Transfer Group Europe BV guarantees that this product is adequate for the stated use in
chapter 1 and is in accordance with the Directive(s) stated in the declaration of conformity in this manual.
OPW Fluid Transfer Group Europe BV cannot be held responsible for incorrect use of the RACK
MONITOR 8800E/8801E. The Rack Monitor 8800E/8801E is for the use of monitoring of loading of tank
trucks with the application and parameters stated in chapter 1 of this manual.
In case this OPW Rack Monitor 8800E/8801E is used in another location then mentioned in the initial
quotation or is abused, all guarantees will be declined.
This installation manual is a part of the supplied product and must at all times accompany the Rack Monitor
8800E/8801E, when it is relocated or sold to a third party. All pages of this manual should be present, in
accordance to the table of contents. If not, please contact the OPW Fluid Transfer Group Europe BV.
© COPYRIGHT 2007. The design, drawings and documentation are the exclusive property of OPW Fluid
Transfer Group Europe BV. It is submitted on the condition that the designs contained therein are held
confidential and is subject to return on demand.
Apart from exceptions provided by the law, nothing from this publication may be duplicated and/or published
by means of photography, microfilm, storage in computer files or otherwise, which also applies to full or
partial processing, without the written consent of OPW Fluid Transfer Group Europe BV.
Although the utmost care has been taken with this publication, errors and omissions cannot be entirely
excluded. The OPW Fluid Transfer Group Europe BV therefore accepts no liability, not even for direct or
indirect damage, occurring due to or in relation with the application of publications issued by OPW Fluid
Transfer Group Europe BV.
This is an OPW Fluid Transfer Group Europe BV product, for technical assistance, information and/or
complaints contact:
OPW Fluid Transfer Group Europe BV
Visiting adress:
Roggestraat 38
2153 GC Nieuw Vennep
Postal adress:
P.O.Box 32
2150 AA Nieuw Vennep
T: +31 (0)252 660 300
F: +31 (0)252 660 204
E: sales@opw-ftg.nl
W: http://www.opw-ftg.nl
Mr. Harry Gilde
Managing Director
