Dover Triton 9600 Series Bedienungsanleitung

E*TRADE ADDENDUM

TO9600-SERIES

OPERATION MANUAL

VERSION 1.0

TDN 07103-00024 08/01

be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any

human or computer language, in any form, by any means whatsoever, without the express

written permission of Triton Systems, Inc.

CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION)

RETURN ADDRESS:

522 E. Railroad Street 21405 B Street

Long Beach, MS 39560 Long Beach, MS 39560

PHONE: (228) 868-1317

FAX: (228) 868-0437

Contents

SECTION 1 - INTRODUCTION............................................................................................................................ 1-1

WHAT’SIN THIS ADDENDUM ....................................................................................................................................... 1-2

MANAGEMENT FUNCTIONS .......................................................................................................................................... 1-2

CUSTOMER TRANSACTIONS ......................................................................................................................................... 1-2

JOURNAL ................................................................................................................................................................. 1-3

SECTION 2 - MANAGEMENT FUNCTIONS ....................................................................................................... 2-1

INTRODUCTION .......................................................................................................................................................... 2-2

NEW OR MODIFIED MANAGEMENT FUNCTIONS ............................................................................................................... 2-2

FUNCTION: TRANSACTION TYPE SETUP............................................................................................................ 2-3

FUNCTION: E*TRADE TRANSACTION TYPES ..................................................................................................... 2-4

FUNCTION: NON-E*TRADE TRANSACTION TYPES ............................................................................................ 2-5

FUNCTION: ACCOUNT TYPE SETUP.................................................................................................................... 2-6

FUNCTION: E*TRADE ACCOUNT TYPES ............................................................................................................. 2-7

FUNCTION: NON-E*TRADE ACCOUNT TYPES .................................................................................................... 2-8

FUNCTION: E*TRADE BINS ................................................................................................................................... 2-9

FUNCTION: O.A.R. SWITCH................................................................................................................................. 2-10

FUNCTION: TRITON CONNECT........................................................................................................................... 2-11

FUNCTION: T.O.T.C.C ........................................................................................................................................... 2-12

FUNCTION: SURCHARGE LOCATION / MESSAGE ............................................................................................ 2-15

SECTION 3 - CUSTOMER TRANSACTIONS...................................................................................................... 3-1

INTRODUCTION .......................................................................................................................................................... 3-2

CUSTOMER TRANSACTIONS ......................................................................................................................................... 3-2

FIGURE 3-1 - E*TRADE WITHDRAWAL TRANSACTION FLOW ....................................................................... 3-3

FIGURE 3-2 - E*TRADE TRANSFER TRANSACTION FLOW ............................................................................ 3-5

FIGURE 3-3 - E*TRADE BALANCE TRANSACTION FLOW............................................................................... 3-7

FIGURE 3-4 - NON-E*TRADE CUSTOMER TRANSACTION FLOW .................................................................. 3-9

SECTION 4 - JOURNAL ...................................................................................................................................... 4-1

JOURNAL ENTRIES .................................................................................................................................................... 4-2

SECTION 1

INTRODUCTION

TRITON SYSTEMS, INC.

E*TRADE ATM SOFTWARE - ADDENDUM

1-2

SECTION 1 - INTRODUCTION

WHAT’SIN THIS ADDENDUM

ThisAddendumtotheATMOperationsManualdescribesthenew

features offered by the E*TRADE OAR version of Triton ATM

software.

TheAddendumcontentsarespreadacrossthe following sections:

Section 1 - Introduction. This section gives a summary of the

new features offered by the E*TRADE OAR version of Triton ATM

software.

Section 2 - Management Functions. This section describes the

newconfigurationoptionsavailable in the E*TRADE OAR version

of Triton ATM software.

Section 3 - Customer Transactions. This section describes the

transactions available to customers of an ATM that is running the

E*TRADE version of Triton ATM software. Both E*TRADE and

non-E*TRADE transactions are described.

Section 4 - Journal. This section provides an example of a

transaction-type journal entry, and provides an extensive list of all

new transaction codes.

MANAGEMENT FUNCTIONS

New management functions enable you to selectively turn on or

turn off various account and transaction types for both E*TRADE

and Non-E*TRADE customers.

Also, a new T.O.T.C.C. (Terminal Originated Triton Connect Call)

feature enables you to establish a time at which the terminal will

automatically call out to a Triton Connect Host PC to retrieve any

pending commands or operations.

CUSTOMER TRANSACTIONS

The customer interface of the E*TRADE version of Triton ATM

software now offers a distinctive, E*TRADE-branded identity.

Two transaction-paths are available, depending upon the type of

ATM card used and the current configuration of the ATM. These

transaction-paths are:

1. E*TRADE Customer Transactions.

2. Non-E*TRADE Customer Transactions.

Terminal Hardware

Requirements

ThenewOARandT.O.T.C.C.features

requirethatthefollowinghardwarebe

installed in the terminal:

1. An Expanded Memory Card.

2. EPROM version 3.00 or higher.

OARandT.O.T.C.C.features arenot

supported unless the terminal

meets the above minimum

hardware requirements!

TRITON SYSTEMS, INC. 1-3

E*TRADE ATM SOFTWARE - ADDENDUM SECTION 1 - INTRODUCTION

E*TRADE customers using a qualifying ATM card will be offered

additional transaction options, which include the ability to withdraw

funds, check balances and transfer funds between E*TRADE

accounts.E*TRADEaccounts fall intotwocategories:1.)E*TRADE

bank or 2.) E*TRADE brokerage accounts.

Within each category of E*TRADE account, both primary and

secondary accounts are available. Transactions can be performed

onvariouscombinations ofprimaryorsecondary,bankorbrokerage

accounts.

Non-E*TRADE customers are offered the standard set of options

for withdrawal, balance inquiry and transfer of funds between non-

E*TRADE bank checking, savings and credit card accounts.

JOURNAL

Because of the large number of transactions that can now be

performed, additional transaction codes have been created to

represent these transactions in communication between the ATM

andthesponsoringhostprocessor system. These codes arestored

intheunit’selectronicjournalandareprintedoutonjournal reports.

SECTION 2

MANAGEMENT FUNCTIONS

TRITON SYSTEMS, INC.

E*TRADE ATM SOFTWARE - ADDENDUM

2-2

SECTION 2 - MANAGEMENT FUNCTIONS

INTRODUCTION

This section describes the new or revised Management Functions

in the E*TRADE version of ATM operating software.

NEW OR MODIFIED MANAGEMENT FUNCTIONS

A summary of changes to the Management Functions is provided

below:

TRANSACTION TYPES. This function has been split into areas

for E*TRADE and NON-E*TRADE customers. Options to turn ON

or OFF the availability of transaction types (Transfers and Balance

Inquiries) for E*TRADE specific accounts have been added.

ACCOUNT TYPES. This function has also been split into areas for

E*TRADEandNON-E*TRADEcustomers. New optionsenableyou

to turn ON or OFF the availability of account types that are only

offered to E*TRADE customers, such as Money Market and

Brokerage accounts.

E*TRADE BINS. This function enables the ATM to recognize

E*TRADE customer cards, using the BIN (Bank Identification

Number) stored on the card.

O.A.R. SWITCH. The O.A.R. (Open Account Relationship) Switch

enables you to turn ON or OFF the availability of E*TRADE

customer account and transaction type options.

T.O.T.C.C.. The T.O.T.C.C. (Terminal Originated Triton Connect

Calls) feature enables a terminal to call a Triton Connect PC on a

scheduled basis, during which any pending operations can be

performed.

SURCHARGE.TheSURCHARGELOCATIONANDSURCHARGE

MESSAGE functions have been modified from previous versions

of ATM software. The surcharge location setting is now fixed at

‘Beginning’and the surcharge location option has been removed

from Management Functions. The standard surcharge message

now reflects an E*TRADE branded appearance.

TRITON SYSTEMS, INC. 2-3

E*TRADE ATM SOFTWARE - ADDENDUM SECTION 2 - MANAGEMENT FUNCTIONS

FUNCTION: TRANSACTION TYPE SETUP

FACTORY DEFAULT: N/A

ACCESS INSTRUCTIONS:

1.) Select the TERMINAL CONFIGURATION option from the

MANAGEMENT FUNCTIONS screen.

2.) Select TRANSACTION TYPES.

DESCRIPTION:

This menu allows you to access transaction type configuration op-

tions for E*TRADE OR NON-E*TRADE customers.

ERROR CONDITIONS:

There are no error conditions directly associated with this function.

TRITON SYSTEMS, INC.

E*TRADE ATM SOFTWARE - ADDENDUM

2-4

SECTION 2 - MANAGEMENT FUNCTIONS

FUNCTION: E*TRADE TRANSACTION TYPES

FACTORY DEFAULT: ON

ACCESS INSTRUCTIONS:

1.) Select the TERMINAL CONFIGURATION option from the

MANAGEMENT FUNCTIONS screen.

2.) Select TRANSACTION TYPES.

3.) Select E*TRADE CUSTOMER.

DESCRIPTION:

This menu allows you to access transaction type configuration op-

tionsforE*TRADEcustomers.Theavailabletransactiontypesare:

TRANSFERS. This option enables transfers between the various

accounts available to E*TRADE customers (such as PRIMARY

ORSECONDARYBANK,BROKERAGE,CHECKINGorSAVINGS

accounts).

BALANCE INQUIRIES. This option enables the customer to ob-

tain the balance of various E*TRADE accounts.

When the transaction type is turned ON, the terminal will provide

that option to the customer. When the transaction type is turned

OFF, the selected transaction type will not be displayed to the cus-

tomer. The current state of the transaction type is shown as either

ON or OFF in the applicable button label on the display. Press the

button next to the label to toggle the state of the transaction type

between ON and OFF.

ERROR CONDITIONS:

There are no error conditions directly associated with this function.

Inhaltsverzeichnis

Andere Dover Touch-Terminal Handbücher

Dover

Dover OPW PETROVEND PV300E Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung