Dr.Prepare DPWS-OUT-001 Bedienungsanleitung

PROJECTION

CLOCK

Manual

Model: DPWS-OUT-001

- 01 -

FEATURES

WWVB radio time calibration

Perpetual calendar up to year 2099

Time in optional 12/24 hour format

Two daily alarms

Automatic snooze function

Temperature:

Display minimum/maximum temperature

Wireless Remote Sensor:

The weather forecast function

Colorful backlight function

USB output port (5V/1A)

Power supply:

Indoor temperature measurement ranges: 14°F (-9.9°C) ~122°F

(50°C)

—

Outdoor temperature measurement ranges: -40°F (-40°C) ~

158°F (70°C)

—

Temperature displayed in °F or °C

—

Wall mount or placing it on table

—

One wireless thermo sensor included

—

433.92MHz RF transmitting frequency

—

200-foot transmission range in an open area

—

Projection Clock:

- 02 -

NOTE

Battery: 2 x LR03 AAA (not included)

—

DC-Power: DC5.0V, 1.2A

—

Battery: 2 x LR03 AAA (not included)

The working temperature for alkaline zinc-manganese batteries is

acound -4°F (-20°C) to 140°F (60°C) and that for polymer

lithium-ion batteries is around -40°F (-40°C) to 158°F (70°C).

Please choose batteries based on the ambient environment.

A1: Weather forecast A2: Time

A3: Week A4: Indoor temperature

A5: Outdoor temperature A6: Calendar

—

Wireless Remote Sensor:

IDENTIFYING PARTS

Part A-LCD screen

A7: Projection: time and indoor/outdoor temperature

- 03 -

PREPARATION

Open the battery compartment of the Projection Clock and insert

two AAA batteries based on "+" and "-" polarity marks.

Insert the power cord to the socket of your Projection Clock.

All the icons on the LCD screen will light up for 3 seconds. After

a beep, the clock will display indoor temperature.

The Projection Clock starts to connect the Remote Sensor,

which takes about 3 minutes. A flashing RF antenna symbol will

be displayed on the Projection Clock.

B1: “ ” button B2: “MODE” button

B3: “MEM” button B4: “+” button

B5: “-” button B6: “LOOP” button

B7: “RAINBOW” button B8: Alarm1 on/off switch

B9: Alarm2 on/off switch B10: USB output port

B11: Battery compartment B12: Power supply socket

B13: Projection on/off switch

Part B-Buttons and switches

Part C –Wireless remote sensor

C1: Battery compartment

- 04 -

RECEPTION OF RADIO SIGNALS

Open the battery compartment of the Wireless Remote Sensor.

Insert 2 x AA batteries according to the "+" and "-" polarity marks.

After pairing with the Wireless Remote Sensor, the Projection

Clock enters the radio signals reception mode to synchronize

time.

The clock automatically starts the search for WWVB signals

after 7 minutes of any restart or replacing new batteries. The

radio mast icon begins to flash.

To start WWVB signal reception manually, press the "+" and "-"

button at the same time. If no signals are received within 7

minutes, then the search for WWVB signal stops (the radio mast

icon disappears) and restarts in the next one hour.

To end searching for radio signals during the reception, long

press the "-" button for over 2 seconds.

At 1:00 / 2:00 / 3:00 a.m., the clock goes through synchroniza-

tion procedure with the WWVB signals to calibrate time. If

synchronization is unsuccessful (the radio mast icon disappears

from the screen), the system will make another attempt in the

next one hour. The procedure will be repeated automatically up

to maximum 5 times.

- 05 -

NOTE

SETTING TIME MANUALLY

A flashing radio mast icon indicates that the WWVB signal

reception has started.

A continuously displayed radio mast icon indicates that the

WWVB signals are received successfully.

We recommend a minimum distance of 8 feet to all sources of

interference, such as televisions or computer monitors.

Radio reception is weak in rooms with concrete walls (e.g.

cellars, offices, etc.). In this condition, please place your

Projection Clock close to a window.

Short press the "MODE" button to check the calendar, time of

Alarm1, and time of Alarm 2.

Press and hold the "MODE" button for more than 2 seconds and

the Year icon starts to flash. Use "+" and "-" buttons to set the

correct year.

In radio receiving mode, only the "-" button functions. If you want

your Projection Clock to perform other functions, please press

and hold the "-" button for more than 2 seconds to get out of the

radio signals reception mode.

- 06 -

Press “MODE” button to confirm your setting and the Month icon

starts to flash. Now use “+” and “-” buttons to set the correct

month.

Press “MODE” button to confirm your setting and the Date icon

starts to flash. Now use “+” and “-” buttons to set the correct

date.

Press “MODE” button to confirm your setting and the Month and

Date icon starts to flash. Now use “+” and “-” buttons to set the

date display on Month/Date or Date/Month.

Press "MODE" button to confirm your setting and the Time

Zones start to flash, Now use “+” and “-” buttons to set a correct

time zone (-8 PST-07 MST -06 CST and -5 EST).

Press "MODE" button to confirm your setting and the DST icon

starts to flash. Now use "+" and "-" buttons to turn on/off DST.

Press "MODE" button to confirm your setting and the 12/24 hour

mode icon starts to flash. Now use “+” and “-” buttons to set the

correct 12/24 hour mode.

Press "MODE" button to confirm your setting and the Hour icon

starts to flash. Now use “+” and “-” buttons to set the correct

hour.

Press “MODE” to confirm your setting and the Minute icon starts

to flash. Now use “+” and “-” buttons to set the correct minute.

Press "MODE" button button to confirm your setting, the

temperature unit starts to flash. Now use “+” and “-” buttons to

choose a temperature unit, °C or °F.

- 07 -

NOTE

SETTING DAILY ALARMS

Press “MODE” button to confirm your setting and the weather

forecast pattern icon starts to flash. Now use “+” and “-” buttons

to select the current weather pattern.

Press "MODE" button to confirm your setting and to end the

setting procedures.

After 20 seconds without pressing any button, the clock switches

automatically from Setting Mode to Normal Time Mode.

The time zone must be set correctly according to your location.

Otherwise, the time will be incorrect when time signals are

received.

If the daylight saving time system is not implemented in your

area, please turn off DST.

Long press "MEM" button for more than 2 seconds until the Hour

icon of the Alarm 1 starts to flash. Use the "+" and "-" buttons to

set the desired hour.

America time zone：

EST: Eastern Standard Time -5

—

CST: Central Standard Time -6

—

MST: Mountain Standard Time -7

—

PST: Pacific Standard Time -8

—

- 08 -

NOTE

ACTIVATE/DEACTIVATE ALARMS

Press "MEM" button to confirm your setting and the Minute icon

of the Alarm 1 starts to flash. Use the "+" and "-" buttons to set

the desired minute.

Press "MEM" button to confirm your setting and the Hour icon of

the Alarm 2 starts to flash. Use the "+" and "-" buttons to set the

desired hour.

Press "MEM" button to confirm your setting and the Minute icon

of the Alarm 2 starts to flash. Use the "+" and "-" buttons to set

the desired minute.

Press “MEM” button to confirm your setting and to end the

setting procedures.

After 20 seconds without pressing any buttons, the clock

switches automatically from Setting mode to Normal clock

mode.

When the switch of Alarm 1 or Alarm 2 is turned "ON", the "

"or " " icon is displayed on LCD screen. The Alarm 1 or Alarm

2 is activated.

Turn off the alarm switch and the " " or " " icon disappears,

which means Alarm 1 or Alarm 2 is deactivated.

- 09 -

NOTE

TURNING OFF ALARMS

SNOOZE FUNCTION

DISPLAYING TEMPERATURE/HUMIDITY AND TRENDS

The alarm will ring for 2 minutes if you do not deactivate it by

pressing any buttons. In this condition, the alarm will repeat

automatically after 24 hours.

Once connected with the Wireless Remote Sensor, the

Projection Clock can display the outdoor temperature and

trends.

The volume of sound (crescendo, duration: 2 minutes) will be

increased for 4 times to make sure the alarm can be heard.

The first snooze alarm will be deactivated as the Alarm 2 starts

ringing.

Press any buttons except the " " button to stop the alarm.

The current indoor temperature/humidity and trends (indoor) are

displayed on the LCD screen.

Press the " " button to enter snooze mode. After the snooze

timer expires, the alarm will ring again.

- 10 -

Inhaltsverzeichnis

Andere Dr.Prepare Uhr Handbücher

Dr.Prepare

Dr.Prepare EWT86121 Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung