Draper RPT1 Bedienungsanleitung
INSTRUCTIONS FOR
Radiator
Pressure Test Kit
Stock No.14455 Part No.RPT1
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy
of continuous improvement determines the right to make modifications without prior warning.
MANUAL PRESSURE TESTING INSTRUCTIONS
- 1 -
1. IMPORTANT: For detailed and concise instructions on
the correct use of this kit, refer to the vehicle
manufacturer’s or Haynes workshop manual.
2. WARNING: Do not over pressurize the system, as
excessive pressure may cause failure of the radiator, hoses
etc.
3. Carefully undo and remove the radiator or expansion
tank pressure cap (use a cloth or gloves and arm
protection if the radiator cap is known to be hot).
4. Select the correct adaptor and configuration of the
stationary seat accessories and ensure it is securely fitted
to the filler neck of the radiator or expansion tank (Fig.1).
5. Attach the ‘push-fit’ connector (A) onto the male
tailpiece of the adaptor fitted to the radiator.
6. Depress the hand pump handle (B) and check the
reading indicated on the pressure gauge (C). Ideal
readings should range between 12-15PSI (always check
relevant manufacturer’s or Haynes workshop manual),
if the pressure level is below this range or the pressure
drops during testing, a leak in the coolant system
(radiator, hose, etc.) is the most likely source of the
problem.
7. Once the test is complete, release the air pressure by
depressing the quick release valve (D). Disconnect the
‘push-fit’ connector (A) and adaptor assembly and
replace the radiator filler cap securely.
USING KIT WITH COMPRESSED AIR LINE:
-WARNING: Input air pressure must be set to below 25psi
on compressed air line BEFORE connecting to cooling
system. Failure to do so will cause damage to the system
and danger to the user.
- Proceed as in steps 1-4 above.
- Ensure air tap (E) is in closed position (see Fig.3).
- Connect compressed air line to air inlet (F).
- Connect to adaptor using quick-coupling (G).
- Slowly open air tap (E) until air pressure gauge (H)
shows the required test pressure (always check relevant
manufacturer’s or Haynes workshop manual).
- Once the test is complete, completely close air tap (E),
disconnect compressed air line (F) then carefully re-open
air tap (E) to release stored pressure and remove from
cooling system. Finally, replace the radiator cap securely.
FIG.2
FIG.1
(A)
(B)
(C)
(D)
(G) (E)
(F)
(H)
FIG.3
ADAPTORS AND ACCESSORIES
- 2 -
Adaptor 1
Mercedes Benz, for
60mm external cap
thread.
Adaptor 3
Vauxhall/Opel,
Ford universal for
48mm external cap
thread.
Adaptor 4
BMW for 57mm
internal cap thread.
Adaptor 5
BMW for 49mm
external cap thread.
Adaptor 6
Volvo, Citroen, Fiat,
Renault, Peugeot
universal for 45mm
external cap thread.
Adaptor 7
Audi/VW universal
for 43mm external
cap thread.
Adaptor 8
Universal adjustable
sprung adaptor seat.
Configuration of
universal adjustable
seats for Japanese
cars.
Adaptor 9
Adaptor pin for item
8 with 50mm
diameter base for
main Japanese &
European vehicles.
Adaptor 10
Adaptor pin for item
8 with 35mm
diameter base for
main Japanese &
European vehicles.
Adaptor 11
Adaptor pin for item
8 with 27mm
diameter base for
main Japanese &
European vehicles.
Adaptor 12
Universal cap
adaptor.
Adaptor 13
Universal cap
adaptor.
Adaptor 14
U-piece stainless
steel cap clamp.
Adaptor 15
Honda/Toyota
sprung clamp
cap - 42mm.
Adaptor 17
Ford - for use with
items 9, 10, 11
- 52mm external
cap thread.
Adaptor 18
Ford - for use with
items 9, 10, 11
- 56mm for standard
lug cap.
Adaptor 19
Mercedes Benz for
50mm external
cap thread.
Adaptor 20
Ford - for 49mm
external cap thread.
Adaptor 2
Audi (new A4, A5,
A6) for 62mm
internal threaded
cap.
Configuration of
universal adjustable
seats for European
cars.
Adaptor 16
Mitsubishi/Ford/
Nissan/Mazda
sprung clamp
cap - 44mm.
CONTACTS
- DRAPER TOOLS LIMITED,
Hursley Road, Chandler's Ford,
Eastleigh, Hampshire. SO53 1YF. U.K.
- Helpline: (023) 8049 4344
- Sales Desk: (023) 8049 4333
- Internet: www.draper.co.uk
- Sales Fax: (023) 8049 4209
- General Enquiries: (023) 8026 6355
- Service/Warranty Repair Agent
For aftersales servicing or warranty repairs, please
contact the Draper Tools Helpline for details of an
agent in your local area.
YOUR DRAPER STOCKIST
PJDH130510
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or
transmitted in any form or by any means, electronic, mechanical photocopying,
recording or otherwise without prior permission in writing from Draper Tools Ltd.
Dieses Handbuch passt für folgende Modelle
1
Andere Draper Prüfgeräte Handbücher
Draper
Draper VS4 Bedienungsanleitung
Draper
Draper EGRVT Bedienungsanleitung
Draper
Draper AFT-4B Bedienungsanleitung
Draper
Draper FCR-TPMS Bedienungsanleitung
Draper
Draper 82384 Bedienungsanleitung
Draper
Draper KFT 24446 Bedienungsanleitung
Draper
Draper Expert 23420 Bedienungsanleitung
Draper
Draper BBFC2 Bedienungsanleitung
Beliebte Prüfgeräte Handbücher anderer Marken
SMART
SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung
Agilent Technologies
Agilent Technologies BERT Serial Bedienungsanleitung
Agilent Technologies
Agilent Technologies N3280A Bedienungsanleitung
Vernier
Vernier Go Direct Voltage Bedienungsanleitung
Lifeloc
Lifeloc R.A.D.A.R. Bedienungsanleitung
Fluke
Fluke T5-600 Bedienungs- und Montageanleitung
PCB Piezotronics
PCB Piezotronics 8159-0112A Bedienungsanleitung
BW Technologies
BW Technologies MicroDock II Bedienungsanleitung
Sun Nuclear
Sun Nuclear 1027 Bedienungsanleitung
Biomark
Biomark HPR LITE READER Bedienungsanleitung
Hioki
Hioki 3169-20 Bedienungsanleitung
Ashcroft
Ashcroft ATE-100 Bedienungsanleitung