Dreamline HORIZON Bedienungsanleitung

Rev 2.1 1

HORIZON

SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS

IMPORTANT

DreamLineTM reserves the right to alter, modify or redesign products at any time without

prior notice. For the latest up-to-date technical drawings, manuals or any other details

please refer to the support.BathAuthority.com web page.

Please carefully read the instructions before installing. If you have any questions regarding

installation, please call our technical support specialists Monday through Friday 9:00 AM –

5:00 PM EST at 1-866-731-8378, ext. 3 or e-mail our technical support group at

[email protected].

For more information on DreamLineTM Shower Enclosures please visit www.BathAuthority.com

Rev 2.1 2

Preparation

1. After opening all boxes and packages, read this introduction carefully. Check that all of the

needed parts are included in the package, by marking all the components on the “Detailed

Diagram of Shower Enclosure Components”. Examine boxes and packages for shipping damage.

If the unit has been damaged, has a finishing defect, or has missing parts, please contact our

customer support department within 3 business days of the delivery date. Please note that

DreamLine TM will not replace any damaged products or missing parts free of charge

after 3 business days or if the product has been installed. Feel free to contact DreamLineTM

if you have any questions.

2. Please note that you should consult your local building codes with questions on

installation compliance standards. Building and plumbing codes may vary by location,

and DreamLine is not responsible for code compliance standards for your project.

3. If this unit is going to be installed in a new construction, please, install all of the required

plumbing and drainage before installing the shower. Use a competent and licensed (if

required by local code) plumber for all plumbing installation.

4. Please insure that prior to the installation the installation surface is leveled and solid and will be

able to support the total weight of the unit. Also make sure the walls are at right angles. While

some adjustment in leveling of the door is possible, irregular installation surface level or

improper angle of side walls will result in serious problems for your installation. Please, note

that some adjustments and drilling might be necessary during the installation process.

5. Install a shower base according to the Base installation manual. You should do it before the

wonder board and finish wall installation. The shower enclosure has to be installed against the

finished floor and finished walls.

Tools Required

Caulk Tape

Measure Pencil Screwdriver

Phillips (Ø 5/16")

Drill bit

Level Gun

Caulk Drill

Electric Hammer Knife

(Ø 1/8")

Drill bit

Rev 2.1 3

Detailed Diagram of Shower Enclosure Components

345

2021

Packing List

01 Wall profile (External) 2pcs 12 Magnetic strip 1pair

02 Wall profile (Internal) 2pcs 13 Flanged anti-water strip 1pc

03 Stationary glass 2pcs 14 Bottom anti-water strip 1pc

04 Glass door 1pcs 15 U shape seal gasket 2pcs

05 Pivot bar 2pcs 16 Gasket 4pcs

06 Handle 1pc 17 Round head bolt M8×12 4pcs

07 Pivot assembly 2sets 18 Flat head bolt M8×20 4pcs

08 Wall anchor 8pcs 19 Washer 4pcs

09 Decorative plug 8pcs 20 Hex wrench 1pc

10 Countersunk screw ST4.2×18 8pcs 21 Shower base 1pc

11 Round head screw ST4.2×30 8pcs 22

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed

diagram and packing list in your manual as a reference. Before discarding the carton, check for

small hardware bags that tend to fall to the bottom of the box. If any parts are damaged or

missing, please contact DreamLineTM for replacement.

Rev 2.1 4

Shower Enclosure Diagram

SHEN-2136368

SHEN-2138388

Rev 2.1 5

Shower Enclosure Installation

1. Install the Shower base (21)

according to Shower base

installation instruction.

Shower base must be

installed before the

wonderboard and finish wall

installation.

The shower enclosure has to

be installed against finished

walls.

See Fig. 1 for details.

Fig. 1

2. Place a mark on the wall with a distance of 35½”

or 38¼” above the Shower base (21) (depending

on the size of your unit) from the corner.

Place the Wall profile (External) (01) to the

marked location on the wall above the Shower

base and level it vertically.

See Fig. 2 for details.

Fig. 2

35 1/2"

38 1/4"

35 1/2"

38 1/4"

Rev 2.1 6

3. Mark the drill holes on the wall through the holes in

the Wall profile (External) (01).

Place the Wall profile (External) aside, drill the holes

and insert the Wall anchors (08).

Apply silicone caulk along the wall profile and around

the holes on the wall.

Place the Wall profile (External) (01) back into the

designated position and secure it to the wall using

the Round head screws ST4.2×30 (11).

See Fig. 3 for details.

Fig. 3

4. Push U-Shape seal gasket (15) over the vertical

edge of the Stationary glass (04).

Note: Small holes at the corners of the Stationary

glass must face towards the door.

Place the Stationary glass with attached U-Shape

seal gasket onto the Shower base (21) and slide it

into the Wall profile (External) (01).

Attach the Wall profile (Internal) (02) to the Wall

profile (External) and the Stationary glass using

Countersunk screws ST4.2×18 (10).

Level the Stationary glass vertically and fasten

tight the screws.

Attach the Decorative plugs (09) into the screw

holes on the Wall profile (Internal).

See Fig. 4 and Fig. 5 for details.

Fig. 4

Ø 516

Rev 2.1 7

Fig. 5

5. Attach top and bottom Pivot bars (05) to the

Stationary glasses (03) using Gaskets (16),

Washers (19) and Flat head bolts M8×20

(18). Place the Gasket (16) between the

Pivot bar and the Stationary glass to

prevent glass to metal connection.

Place the Washer between the Flat head

bolts M8×20 and the Stationary glass.

See Fig. 6 for details.

Fig. 6

Rev 2.1 8

6. Mount top and bottom Pivot assemblies (07) to

the Pivot bars (05) using Round head bolts

M8×12 (17).

See Fig. 7 for details.

Fig. 7

7. Remove the back fastener from the Pivot assemblies (07).

Set the Glass door (04) into the Pivot assemblies so the

holes are aligned and secure the Glass door by assembling

the back fastener onto the Pivot assemblies and tighten the

provided bolt.

See Fig. 8 and Fig. 9 for details.

Fig. 8

Rev 2.1 9

Fig. 9

8. Install the Handle (06) to the Glass

door (04).

Start the installation on horizontal

Handle on external side of the

Glass door, and then install the

vertical Handle on internal side of

the Glass door.

Push the Flanged anti-water strip

(13) to the vertical edge of the

Glass door to seal between the

door and the Stationary glass (03).

Push the Magnetic strips (12) to

the vertical edges of the Glass

door and the Stationary glass.

Push the Bottom anti-water strip

(14) to the bottom edge of the

Glass door.

See Fig. 10 for details.

Fig. 10

Rev 2.1 10

9. Apply the silicone caulk along the

connection of the Shower base (21) to the

Stationary glasses (03) and the bottom

Pivot bar (05).

Also apply the silicone caulk along the Wall

profiles.

See Fig. 11 for details.

Fig. 11

Product Maintenance

1. To insure long lasting life for your glass shower products, wipe them off after each use with a soft cloth.

Rinse and wipe of the glass using either soft cloth or squeegee to prevent soap buildup. Never use

abrasive cleaners and cleaning products that contain scoring agent because this may scratch the surface.

Never use bristle brushes or abrasive sponges.

2. To assure a long lasting finish wipe off the metal parts after each use with a soft cloth. Do not use

abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally used, rinse the

surface as soon as possible to prevent finish peeling or corrosion. After cleaning the shiny finishes, rinse

thoroughly and wipe dry with soft cloth. Clean stainless steel surfaces at least once a week. When

applying stainless steel cleaner or polish, work with (not across) the grain. Never use abrasive sponge or

cloth, steel wool or wired brushes.

Inhaltsverzeichnis

Andere Dreamline Duschkabine Handbücher

Dreamline

Dreamline Elegance Bedienungsanleitung

Dreamline

Dreamline Charisma SHDR-1348760 Series Bedienungsanleitung

Dreamline

Dreamline ENIGMA SHDR-6060791272 Bedienungsanleitung

Dreamline

Dreamline Oceana DLG-63 Bedienungsanleitung

Dreamline

Dreamline UNIDOOR PLUS STYLE F Bedienungsanleitung

Dreamline

Dreamline DUET Bedienungsanleitung

Dreamline

Dreamline AQUA-Q SWING SD-373472Q Series Bedienungsanleitung

Dreamline

Dreamline FLEX Bedienungsanleitung

Dreamline

Dreamline ENIGMA-X Bedienungsanleitung

Dreamline

Dreamline Prism DLT-1132320 Bedienungsanleitung

Dreamline

Dreamline SHDR-22287200-01 Bedienungsanleitung

Dreamline

Dreamline MIRAGE-X SHDR-1948723L Series Bedienungsanleitung

Dreamline

Dreamline UNIDOOR MADRID D245872MB01 Series Bedienungsanleitung

Dreamline

Dreamline LINEA SHDR-3230721 Series Bedienungsanleitung

Dreamline

Dreamline MYSTERIE SHDR-61AMZ48 Series Bedienungsanleitung

Dreamline

Dreamline ENIGMA AIR SHEN-6434480 Series Bedienungsanleitung

Dreamline

Dreamline SPARKLE Bedienungsanleitung

Dreamline

Dreamline SHEN-1332460 Series Bedienungsanleitung

Beliebte Duschkabine Handbücher anderer Marken

Insignia

Insignia INS3000 Bedienungsanleitung

RIHO

RIHO BALTIC B309 Bedienungsanleitung

SANIKU

SANIKU DKA/EL-EC 0041 Bedienungsanleitung

AM.PM

AM.PM BLISS Bedienungsanleitung

Samo

Samo B0980 Bedienungsanleitung

AM.PM

AM.PM BLISS SQUARE Bedienungsanleitung

Cello

Cello Ice 70x90 Bedienungsanleitung

agape

agape FLAT D E1P Leitfaden

glass 1989

glass 1989 nonsolodoccia home 140/90 Bedienungsanleitung

AM.PM

AM.PM ADMIRE STEAM CABIN A Bedienungsanleitung

Schulte

Schulte MasterClass D1209030 Bedienungsanleitung

Linie

Linie Tarifa Bedienungsanleitung

US HORIZON

US HORIZON SORRENTO Series Bedienungsanleitung

Arblu

Arblu PERSEO ANGOLO Q-R 2SL+1LF Installationsanleitung

Novellini

Novellini R90 base p.80 Service-Handbuch

SANPLAST

SANPLAST KP1DJa/TX5b Bedienungsanleitung

Insignia

Insignia 9015 Bedienungsanleitung

Kohler

Kohler Sterling 2375 Series Bedienungsanleitung