DSTouch
Ultra-portable Touchscreen Oscilloscope
Quick Start Guide
®
0.Introduction
DSTouch oscilloscope e combines the high performance of a des
ktop oscilloscope with the touch screen experience of a smartphone. I
n terms of performance, it utilizes FPGA-based hardware waveform en
gine architecture, and a large storage depth based on DRAM. In terms
of operation, it creatively designed a set of "single-finger touch" metho
ds, simplifying all functions into 1-3 tap and swipe operations
DSTouch oscilloscope is equipped with a built-in high-capacity lit
hium battery, making it an ideal palm-sized portable instrument.
1. Power On/Off
To prevent accidental power on/off caused by touching the powe
r button, DSTouch provides a long press power button to switch on/of
f and touch screen shutdown function
Button Power On/Off:
Touch Power Off（→ → ）:
2. Run/Stop
DSTouch oscilloscope has physical and touch buttons for easy ru
n/stop control, meeting common usage needs.
Button Run/Stop:
Touch Run/Stop（ ）:
3. Probe
BNC interface on DSTouch allows compatibility with all standard
BNC probes, expanding usability.
Probe compensation:
Connect probe to oscilloscope's compensation reference signal.
Adjust probe compensation capacitor until waveform matches
desired display.
Probe attenuation
Match probe attenuation w
ith oscilloscope channel probe r
atio during use.
4. Autoset
DSTouch Oscilloscopes offer powerful autoset features for conve
nient and stable display of measured waveforms with a single button
press.
Button Autoset:
Touch Autoset（→）:
5. Auto measurement
DSTouch oscilloscope simplifies adding/removing measurement
s on traditional scopes. Just a few taps to add/delete auto measurem
ents from a menu of 20 commonly used options.
Measurement Selection（→→）:
Reserved Charging Contacts
Press & hold 3s to power off
Press this btn to autoset
Choose display position for MEAS
Press & hold 1s to power on
