DRESSTA 560C Bedienungsanleitung

OM560C99/1E

OPERATOR’S MANUAL

560C

SERIAL NUMBERS

15001 AND UP

FOREWORD

Welcome to the growing group of value-conscious people who operate DRESSTA machines

This manual covers the instructions for safe operation, lubrications, adjustments and maintenance

for normal daily care. These instructions are divided into six sections to simplify your reference to

the information most important to you. Refer to the contents page at the beginning of the section for

a complete list of the subjects covered except for Section 1, which should be read entirely.

This manual has been prepared to help you operate and maintain your machine with utmost

efficiency and safety. Read this manual thoroughly and learn your machine before you attempt to

operate it.

It is our policy to improve our products whenever it is possible and practical to do so. We reserve

the right to make changes or add improvements at any time without incurring any obligation to

install such changes on products sold previously.

Due to this continuous program of research and development, periodic revisions may be made to

this publication. It is recommended that customers contact their distributor for information on the

latest revision.

DRESSTA Co. Ltd.

This material is proprietary to DRESSTA Co. Ltd. and is not to be reproduced, used or disclosed

except in accordance with written authorization from DRESSTA Co. Ltd.

SECTION INDEX

Section 1 Introduction.........................................................................................................1.1

Section 2 Safety Precautions .............................................................................................2.1

Section 3 Storage and Shipping.........................................................................................3.1

Section 4 Operating............................................................................................................4.1

Section 5 Maintenance........................................................................................................5.1

Section 6 Specifications .....................................................................................................6.1

SECTION CONTENTS

SECTION 1 - INTRODUCTION

This section discusses the use of this manual and serial number locations.

SECTION 2 - SAFETY PRECAUTIONS

This section lists safety rules concerning personal safety. Read this section carefully and observe

safety precautions specified herein.

SECTION 3 - STORAGE AND SHIPPING

This section discusses how to ship or store this machine.

SECTION 4 - OPERATING

The front portion of this section provides you with instructions for trouble free operation of the

machine. A universal symbol chart for instruments and controls designation is provided. The

instrument and controls area is designed to tell you "where it is, what it does and how to use it".

Read this area carefully. The remaining portion of this section outlines and illustrates the step-by-

step procedures for starting, operating and stopping the machine and discusses a few operating

suggestions and techniques and simple ideas to help ease the work and lengthen the useful life of

your machine.

SECTION 5 - MAINTENANCE

The beginning of this section outlines a complete scheduled maintenance program, which helps to

reduce down-time and expense, and increase the profit and work from your machine. Read and

use this area. Following the maintenance program are the lubrication recommendations and

requirements for the machine. The remainder of the section is devoted to clearly explaining the

"how to" of the many maintenance and adjustment procedures listed in the maintenance program.

SECTION 6 - SPECIFICATIONS

This section covers the general dimensions schematics, forces and weights, refill capacities,

ground speeds and the standard and special torque values.

SECTION CONTENTS

1. INTRODUCTION

1.1. Introduction ............................................................................................................................. 3

1.2. Serial Numbers ....................................................................................................................... 4

2. SAFETY PRECAUTIONS

2.1. General ................................................................................................................................... 3

2.2. Before Starting the Engine ...................................................................................................... 4

2.3. Operating the Machine ............................................................................................................ 4

2.4. General Maintenance Precautions ......................................................................................... 6

2.5. When Parking ....................................................................................................................... 10

2.6. Safety Graphics Location ..................................................................................................... 11

3. MACHINE TRANSPORT AND STORAGE

3.1. Machine Transport ...................................................................................................................3

3.2. Lifting on Slings ........................................................................................................................5

3.3. Moving a Disabled Machine .....................................................................................................6

3.4. Machine Storage ......................................................................................................................6

4. OPERATING

4.1. General ................................................................................................................................... 3

4.2. Universal Symbols for Instruments And Controls .................................................................. 4

4.3. Instruments and Controls ....................................................................................................... 8

4.4. Suspension Seal ................................................................................................................... 19

4.5. Seat Belt ............................................................................................................................... 21

4.6. Cab Heating and Ventilation .................................................................................................. 22

4.7. Air Cleaner Service Indicator and Hydraulic Reservoir Sight Gauge.....................................24

4.8. Dome Lights with Switches .................................................................................................. 24

4.9. Cab Door Latch .................................................................................................................... 24

4.10. Access Panel “T” Handle ...................................................................................................... 25

4.11. Electrical Master Switch ....................................................................................................... 25

4.12. Starting and Stopping the Engine ......................................................................................... 26

4.13. Driving the Machine .............................................................................................................. 29

4.14. Shifting Gears ....................................................................................................................... 32

4.15. Steering ................................................................................................................................. 32

4.16. Stopping the Machine ........................................................................................................... 33

4.17. Parking the Machine ............................................................................................................. 33

4.18. Loader Operations ................................................................................................................ 34

4.19. Loader Techniques ............................................................................................................... 37

4.20. Economical Operation of the Machine ................................................................................. 44

5.MAINTENANCE

5.1. General Precautions ............................................................................................................... 3

5.2. Scheduled Maintenance Guide ............................................................................................... 4

5.3. Maintenance and Service Chart ............................................................................................. 6

5.4. Lubrication .............................................................................................................................. 9

5.5. Seasonal Preparations ......................................................................................................... 14

5.6. Air Cleaning System ............................................................................................................. 15

5.7. Brakes ................................................................................................................................... 19

5.8. Cooling System ..................................................................................................................... 24

5.9. Drive Axles ............................................................................................................................ 30

5.10. Electrical System .................................................................................................................. 32

5.11. Engine ................................................................................................................................... 35

5.12. Ether Injector ......................................................................................................................... 39

5.13. Fuel System .......................................................................................................................... 40

5.14. Hydraulic System .................................................................................................................. 43

5.15. Seat Belt ................................................................................................................................ 47

5.16. Steering Gear ........................................................................................................................ 47

5.17. Tires and Rims ...................................................................................................................... 47

5.18. Transmission and Torque Converter .................................................................................... 48

5.19. Cab ........................................................................................................................................ 51

5.20. Loader Equipment ................................................................................................................. 51

6.SPECIFICATIONS

6.1. Application ............................................................................................................................... 3

6.2. Technical Description ............................................................................................................. 3

6.3. Schematic of Wheel Loader Drive Train ................................................................................. 4

6.4. Schematic of Torque Converter and Transmission Hydraulic System .................................. 5

6.5. Loader Equipment and Steering Hydraulic System Schematic ............................................. 6

6.6. Brake Hydraulic System Schematic ....................................................................................... 8

6.7. Wiring Diagram ..................................................................................................................... 10

6.8. Specifications ........................................................................................................................ 15

6.9. 560C Loader Equipment ....................................................................................................... 19

6.10. Torque Values for Standard Metric Fasteners ...................................................................... 20

6.11. Torque Values for Standard English Fasteners.................................................................... 21

6.12. Torque Values for Split Flange Connections ........................................................................ 22

6.13. Torque Values for Hydraulic Tubes and Fittings ................................................................... 23

6.14. Torque Values for Hose Clamps ........................................................................................... 23

6.15. Torque Values for Air Conditioning Tubes and Fittings......................................................... 24

6.16. Torque Values for Air Conditioning 0-ring Connections ........................................................ 24

6.17. Special Torques .................................................................................................................... 25

6.18. Service Tools ........................................................................................................................ 26

SECTION 1

INTRODUCTION

Inhaltsverzeichnis

Andere DRESSTA Frontlader Handbücher

DRESSTA

DRESSTA 515C Bedienungsanleitung

Beliebte Frontlader Handbücher anderer Marken

Hitachi

Hitachi ZW 550-6 Bedienungsanleitung

Bush Hog

Bush Hog TOUGH 2426QT Bedienungsanleitung

Aosom

Aosom 370-167V80 Bedienungsanleitung

ahlmann

ahlmann AL 80S Bedienungsanleitung

jcb

jcb 2CX Bedienungsanleitung

Wacker Neuson

Wacker Neuson WL 30 Bedienungsanleitung

ahlmann

ahlmann AF 60e Bedienungsanleitung

McNeilus

McNeilus Contender Bedienungsanleitung

WIFO

WIFO K55A Bedienerhandbuch

RHINO

RHINO F-4123C Bedienungsanleitung

Barko Hydraulics

Barko Hydraulics Barko Loaders 160B Bedienungsanleitung

Simplicity

Simplicity 510 Bedienungsanleitung

RHINO

RHINO 2410 Bedienungsanleitung

SDLG

SDLG LG936 Handbuch

Avantco

Avantco R35 Bedienungsanleitung

Morbark

Morbark RAYCO 1800 AWL Installations- und Benutzerhandbuch

New Holland

New Holland B100C Bedienungsanleitung

Bush Hog

Bush Hog 3860 QT Bedienungsanleitung