DRIVEN DR3200BT Bedienungsanleitung

DR3200BT

Welcome

Instruction Manual

Thank you for purchasing the Driven Entertainment System. Before operating your new product, please read

these operating instructions carefully. They contain important information for safe use, installation and

maintenance of the product.

Please keep this instruction manual for future reference. The manufacturer does not accept responsibility for

any damages that may arise due to improper use. If you have any further questions regarding our products,

please contact us at:

[email protected]

ZONE1

ZONE2

3RPT

INT

HDMI USB

4RDM 56

VOL

SEL

MODE

TIME

MUTE

BAND

APS

MEDIA RECEIVER

DR3200BT

FM2 94.5 1

Front Panel Diagram

Zone 1

Speakers on/o

Track Select / Radio Station Search

Volume

VOL+ / VOL-

Reset

Press to master reset the unit

USB

Input

HDMI

Input

Zone 2

Speakers on/o

Selectable Sound Settings

Bass/Trebble/Sub/Zone Volume/EQ

Mode

USB/BT/HDMI/RADIO/AV1/AV2

(Short press to toggle between sources)

Power On/Off — Mute

Short press to turn on. Long press to turn o.

(Short press while powered on to mute)

Interior Speaker LED

(T1 output switch, turn on/off)

Play Pause / P1

Radio Mode: Short press to select station P1, Long press

to save station in P1. (USB Mode: Play / Pause)

INT / P2

Radio Mode: Short press to select station P2, Long press

to save station in P2.

(USB Mode: Song browsing)

RPT / P3

Radio Mode: Short press to select station P3, Long press

to save station in P3. (USB Mode: Repeat playlist)

RDM / P4

Radio Mode: Short press to select station P4, Long press

to save station in P4.

(USB Mode: Randomize playlist)

Radio Mode: Short press to select station P5, Long press

to save station in P5.

Radio Mode: Short press to select station P6, Long press

to save station in P6.

Exterior Speaker LED

(T2 output switch, turn on/off)

Optional Function

(T3 output switch, turn on/off)

Band/Tuner Selection

APS, FM1, FM2, FM3, AM1, AM2

ZONE1

ZONE2

3RPT

INT

HDMI USB

4RDM 56

VOL

SEL

MODE

TIME

MUTE

BAND

APS

MEDIA RECEIVER

DR3200BT

16 17

2119

FM2 94.5 1

Trigger Functions

Forward

Play / Pause

Volume

1 3

Power

Mute

Mode

Zone 2

Band

Zone 1

Remote Control Buttons

Remote Control Diagram

678

5.31in (135.00mm)

1.5 in (38.00mm)

Note: DR3200REM optional remote

available, sold seperately.

Installation

Location

1. Carefully remove the plastic frame from the front panel of the unit.

2. Fix the unit in place with the 4 included #8 pan head self-tapping screws.

3. Replace the plastic from on the front panel of the unit.

• Choose a mounting location away from humid areas, water sources, burning products or any equipment

that can radiate heat.

• Select an area on the wall or cabinet, which is free from cable, fuel or brake lines.

• Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not pressed

against the heat sink.

Installing the unit

• Before nally installing the unit, connect the wiring temporarily and make sure the unit and the system

function properly.

• Fix the unit to the wall using 4 self-tapping screw as indicated in the illustration.

Screw

Plastic frame of

the front panel

4-Speaker (2 zone) Wiring

ZONE 1

LEFT

WHITE

ZONE 1 LEFT SPEAKER (+)

WHITE/BLACK

ZONE 1 LEFT SPEAKER (-)

ZONE 1

RIGHT

GRAY

ZONE 1 RIGHT SPEAKER (+)

GRAY / BLACK

ZONE 1 RIGHT SPEAKER (-)

ZONE 2

LEFT

GREEN

ZONE 2 LEFT SPEAKER (+)

GREEN / BLACK

ZONE 2 LEFT SPEAKER (-)

ZONE 2

RIGHT

PURPLE

ZONE 2 RIGHT SPEAKER (+)

PURPLE / BLACK

ZONE 2 RIGHT SPEAKER (-)

Note: All speakers must be connected as shown. If one wire is removed or improperly

connected then all speakers on the relevant zone will not function as intended. Connection

with incorrect speaker polarity will lead to poor sound quality or speaker damage.

Harness Pin Connections

Brown (Black) / SW-

Grey (Black) / ZONE 1R-

Grey / ZONE 1R+

Purple (Black) / ZONE 2R-

Purple / ZONE 2R+

Green / ZONE 2L+

Green (Black) / ZONE 2L-

White / ZONE 1L+

White (Black) / ZONE 1L-

Yellow / B+12V

Pink / T3-CON

Orange / T2-CON

Blue (White) / T1-CON

Blue / AMP-CON

Black / B+12V

Brown / SW+

Red / ACC

Connections

Wiring Diagram

Antenna

AV OUT

AV OUT 1

AV OUT 2

Subwoofer Out

Audio Out

Wiring

Connecting Harness

Operation

Common Operation

1. To power the unit On/O

When the unit is powered Off, it may be switched On by pressing the POWER button. When the unit is

switched On, press and hold the POWER button to switch it o.

2. To select a function mode

Press MODE button repeatedly on on the front panel to select the corresponding mode.

(FM/AM, AV1, AV2, BLUETOOTH, HDMI)

3. To adjust the volume level

During playback, press VOLUME+ or VOLUME- button on the front panel to increase or decrease the

volume.

4. To mute or resume the sound

During playback, short press POWER button on the front panel to mute sound. Repeat this to disable

mute function.

5. To check speaker output status and select speaker output

Short-press ZONE 1 or ZONE 2 button on the front panel to check the speaker output status.

Press and hold ZONE 1 or ZONE 2 button on the front panel to turn ON/OFF the corresponding speaker

output, “Z 1 ON/OFF” or “Z 2 ON/OFF” will be displayed on the LCD.

6. To set the sound mode and menu

Press and hold SEL button to turn on BASS, then press SEL button repeatedly to select or circulate

through TRE (treble), EQ OFF (FLAT/AMERICA3/AUSTRALIA/EUROPE), press VOLUME+/- to change the

settings. Press SEL button to conrm your selection.

- 1) VOL LAST / VOL DEFA

VOL LAST: The last volume level setting will be saved automatically after the unit is swithced o, and

restored after powered on.

VOL DEFA: Press SEL button on the front control panel, the AVOL mark will be displayed on LCD. Use

VOLUME +/- to set the volume level as a constant value.

- 2) VOL LAST / VOL DEFA

In Radio mode, with the DX/LOCAL selection you can change the attenuator settings at the input stage

of the radio. This selection helps to avoid overloading the radio when strong (local) stations are received.

Select DX (DISTANT) mode to receive far/weak radio stations (highest sensitivity settings are enabled)

and select LOCAL for very strong stations (which are located nearby).

- NOTE: This button is only for FM reception. In AM mode, LOC is in valid.

7. To display and adjust the time

Press and hold MODE button to display time.

Press and hold MODE button for ~ 2 seconds until the time displays then release and hold MODE button

again until the hour begins to ash. Use VOLUME+/- button to adjust the hour. While hours is ashing,

hold MODE button until minutes begin to ash then Use VOLUME+/- button to adjust the hour.

8. To reset the unit

- 1) Press RESET button with a cuspidal object. The unit will be reset to factory default settings.

Radio Operation

1. To select radio band

Press BAND button repeatedly to select a desired radio band in sequence and circulating as:

-->FM1-->FM2-->FM3-->AM1-->AM2

2. To search for radio station manually or automatically

- In radio mode, press << / >> button to search your desired radio stations up/down manually.

- Press and hold << / >> button to search for the strongest station up/down automatically.

3. To store current station or turn on a preset one

- 1) If you want to store the current station, press and hold one of the digit butttons form 1~6 to store the

current station on the designated preset. You can store up to 30 presets.

- 2) Press one of the 6 buttons from 1~6 to enter the preset station in current band.

4. To auto search and store the top 6 strongest stations In radio mode, press and hold BAND button on the

front panel, the unit will start to search the available stations and check the signal strength from the lowest

frequency. The top 6 strongest stations will be saved to the corresponding preset numbered band 1~6.

USB Operation

1. To insert or pull out the USB stick

To play the tracks in USB disk, insert the USB disk into the USB port. The playing mode will be changed to

USB mode automatically and the USB indicator will be displayed on the LCD.

2. Press << or >> button to play previous or next track.

3. To fast forward or backward

Press and hold << or >> button to play backward or fast forward, release to resume normal playback.

4. To play previous or next 10th track.

Press 5 or 6 button to play previous or next 10th track.

5. How to use 1/PLAY/PAUSE button

During playback, press 1/PLAY/PAUSE button to pause playback,

Press 1/PLAY/PAUSE button again to resume,

Press and hold 1/PLAY/PAUSE button to select the rst track to play.

Note: DR3200BT supports NFC pairing. The NFC detection area is on the right of the

Power button.

1. Click the MODE button on the DR3200BT front panel to go to Bluetooth mode.

2. You should see NOT PAIR displayed on the LCD. If you see BT LINK and the Bluetooth icon is on, that

means DR3200BT is already connected to another device. You can clear it by pressing and holding the

BT button for ~2 seconds until NO LINK is shown, then continue with the rest of the steps below.

3. Go to the Bluetooth menu of your device.

4. Ensure Bluetooth is turned On.

5. Select the device named DRIVEN.

6. If the pairing and connection is successful, the mobile will show connected while DR3200 will show BT

LINK and the Bluetooth icon on LCD.

Bluetooth Operation

Pair and Connect

6. To repeat track(s)

- During playback, press 3/RPT button briey to play the current track repeatedly. RPT ONE will be

displayed on LCD.

- Press RPT button twice to play the track(s) in the album repeatedly. RPT DIR will be displayed on LCD.

- Press RPT button three times to repeat all tracks. RPT ALL will be displayed on LCD.

- Press RPT button four times to cancel the RPT function, RPT OFF will be displayed on LCD.

7. To play tracks at random

During playback, press RDM button to play all tracks at random. Press it again to cancel.

8. To search a track

Press USB button, TRK 0/00/000 (depending on the total tracks that are saved in the USB disk) will be

displayed on the LCD and the place marker in the 0 position will begin ashing.

After inputing your desired track, press 1/PLAY/PAUSE button to play the track to be selected.

• Bluetooth connection of mobile devices typically covers a 33 ft (10m) open-eld range. DR3200BT

“remembers”the last connected device. The unit will disconnect from any device that goes out-of-range,

DR3200BT will auto-reconnect to your device once it is back in range.

• If you explicitly disconnect the Bluetooth link by pressing the corresponding menu item in your device the

DR3200BT will not auto-reconnect.

• If you turn o Bluetooth from your device while the unit is connected, DR3200BT will not auto-reconnect

when you turn on the device’s Bluetooth option. Some devices will try to reconnect with the last Bluetooth

connected device.

• However, if you turn o Bluetooth on the device after an out-of-range disconnection, DR3200BT will

auto-reconnect once you turn on Bluetooth on the device when it is within range.

• Note that whenever disconnected, the DB3200BT can be paired and connected by any other Bluetooth

device.

Disconnect and Reconnect

• You can explicitly forget (or unpair) DB3200BT in mobile. If you do that while connected in range,

DB3200BT will be properly notied and all settled.

• If you do that after being disconnected while out-of-range, DB3200BT will still auto connect with the

device. If this happens, you can press and hold the BT button for ~2 seconds on DB3200BT to clear its

memory.

Forget (or Unpair)

• When audio is streamed from mobile to DB3200BT, BT AUDIO is shown on the LCD.

• You can control the trick modes (play, stop, next, prev) either from your device or DB3200BT.

• If you hear no sound or very low volume output, please check the volume on your device, then adjust the

volume on the DB3200BT to the level of your choice.

Audio Playback

Specifications

General

DC 12V

Max. 5A

4 x 9 W RMS

(4 Ohm speakers)

4 Channels

3.80 x 3.80 x 3.14 in

96.7 x 96.7 x 79.8 mm

Supply

Voltage

Current

Consumption

Power

Output

Number of

Channels

Mounting

Dimensions

(W x H x D)

FM Section

87.5mHz - 107.9mHz (U.S.A.)

Max. 5A

Frequency

Range

Eective

Sensitivity

AM Section

Frequency

Range

Eective

Sensitivity

Preamp

Output

522kHz - 1620kHz (USA)

40dBu

1V Output

USB Playback

Audio

Format

Frequency

Characteristics

Signal to Noise

Ratio (SNR)

MP3, WMA

20Hz - 100Hz <= 5dB

10kHz - 20kHz <= 5dB

1V Output

Andere Handbücher für DR3200BT

Inhaltsverzeichnis

Andere DRIVEN Heimkinosystem Handbücher

DRIVEN

DRIVEN DR3200BT Bedienungsanleitung

Beliebte Heimkinosystem Handbücher anderer Marken

Samsung

Samsung HT-ES4200K Bedienungsanleitung

Harman Kardon

Harman Kardon HS 100 Bedienungsanleitung

Samsung

Samsung HT-P10 Bedienungsanleitung

Philips

Philips HTS5131 Betriebsanleitung

Goodmans

Goodmans GDVD19SWS Bedienungsanleitung

Moxi

Moxi media center Bedienungsanleitung

Samsung

Samsung HT-EM35 Bedienungsanleitung

LG HE903PAW Bedienungsanleitung

Bose

Bose SoundTouch 520 Bedienungsanleitung

Sony

Sony BDV-N990W Bedienungsanleitung

Manta

Manta GK-500 Bedienungsanleitung

Sharp

Sharp SBW800 Bedienungsanleitung

Philips

Philips HTS3541 Bedienungsanleitung

LG LHT799 Bedienungsanleitung

Samsung

Samsung HT-TWZ415 Bedienungsanleitung

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Bedienungsanleitung

Samsung

Samsung AH68-02166R Bedienungsanleitung

RCA

RCA 600-Watt Bedienungsanleitung