DRYWISE DRYWISE-FIL-DRYER-175 Bedienungsanleitung

3D PRINTING

FILAMENT DRYER

On-demand, repeatable and reliable ﬁlament drying

USER MANUAL

Table of contents

1. Introduction 3

1.1. Intended use of Drywise dryer

1.2. General disclaimer

2. Safety 4

2.1. General safety information

2.2. Health and safety

3. The Drywise Filament Dryer 5

3.1. Main components

3.2. Speciﬁcations

4. Installation 6

4.1. Unboxing

4.2. What’s in the box

4.3. Hardware installation and ﬁrst interaction

5. Operation 10

5.1. Recommendations

5.2. Material compatibility

5.3. The drying process (normal operation)

6. Maintenance 19

6.1. Desiccant

6.2. Firmware

6.3. Cleaning

7. Warning Message Screens 20

7.1. Change desiccant

7.2. Connect desiccant

7.3. Check o-rings

7.4. Abort conﬁrmation screen

7.5. Printing done

7.6. Filament stopped moving

7.7. Automatic shut-off

7.8. Operation failed

7.9. Operation done

7.10. Fatal error

7.11. Incompatible material

8. User Operations 26

8.1. Replacing the o-rings

8.2. Replacing the desiccant

8.3. Regenerating the desiccant

8.4. Loading ﬁlament

9. Warranty 30

9.1. General

9.2. Conditions

9.3. Notiﬁcation

9.4. Exclusions

9.5. Applicable law and competent court

Drywise User Manual 3

1.1. Intended use of Drywise dryer

Drywise dryer is designed and built for use in FDM/FFF 3D printing to be used in-line

with a 3D printer. The device removes excess humidity from the ﬁlament before and

during 3D printing.

1.2. General disclaimer

This user manual describes the intended workﬂow for the Drywise dryer.

Please carefully read and understand the contents of this user manual. Failure to read

the manual may lead to personal injury, inferior results or damage to the Drywise

dryer, 3D Printer or its peripherals. Make sure that anyone who uses this device knows

and understands the contents of the manual to make the most out of the Drywise

dryer.

The conditions or methods used for assembling, handling, storage, use, maintenance

or disposal of the device are beyond Thought3D’s control and may be beyond its

knowledge. For this and other reasons, Thought3D does not assume responsibility and

expressly disclaims liability for loss, injury, damage or expense arising out of or in any

way connected with the assembly, handling, storage, use, maintenance or disposal of

the product.

The information in this document was obtained from sources which Thought3D

believes are reliable. However, the information is provided without any warranty,

express or implied, regarding its accuracy.

1. Introduction

Drywise User Manual4

2.1. General safety information

• Read and understand safety measures before use of the Product.

• Use the product for intended purpose only.

• Use the product with caution. The internal components of the Product

generate high temperatures that can cause injury. Do not open / remove the

case or dismantle the Product. Allow at least 30 minutes for Product to cool

down, before performing any maintenance or modiﬁcation.

• Do not modify or change any parts of the product unless the change or

modiﬁcation is authorised by the manufacturer or this manual.

• Follow standard electrical safety procedures.

• Follow instructions and safety indicators on the screen of the product and/or

follow safety warning labels on the product components.

• Install the product near the 3D printer safely. When the device is connected to

the 3D printer via ﬁlament, the forces of the extruder may pull the device.

• Do not manually pull or push on ﬁlament when the product is in operation unless

instructed by the product user interface.

• This product is not intended for use by children.

• Thought3D products (including Drywise Dryer) are not intended for use by

persons with reduced physical and/or mental capabilities, lack of experience

or knowledge, unless they are supervised or have been given instructions

concerning the use of the product by a person responsible for their safety.

• Do not insert any foreign objects other than approved hygroscopic ﬁlament for

FDM/FFF 3D printing into the pathway of the ﬁlament.

2.2. Health and safety

• The Product dries third party materials. Please follow the safety procedures of

the manufacturers of such materials.

• The Product operates in conjunction with third-party 3D printers. Please follow

the safety procedures of the manufacturers of such devices.

• Follow safety instructions for desiccant handling and regeneration.

• Third party materials may release volatile organic compounds (VOCs) and/

or ultraﬁne particles (UFPs). It is recommended that the Product is set up in a

well-ventilated area.

This guide contains warnings and safety notices:

Provides helpful information to do a task or avoid problems.

Warns against situations that may cause material damage or injury if

the safety instructions are not followed.

2. Safety

Drywise User Manual 5

3.1. Main components

3.2. Speciﬁcations

3. The Drywise Filament Dryer

Properties

Device Filament Inline Dryer

Technology Fused ﬁlament fabrication ﬁlament pre-processing (FFF)

Interface - 4.3” capacitive touch panel

- Guiding LED lights

Filament Path Guided input and output ﬁlament port

Filament Diameter 2.85mm

Compatible Material

- Nylon materials and *reinforced nylon materials from

main ﬁlament brands

- Updated list on https://drywise.co/materials

* Reinfoced nylons require an additional add-on (sold

separately) to be processed satisfactorily by the Drywise

machine.

Operating Sound <50dBA

Connectivity USB-C port

1. Touchscreen

2. USB-C port

3. Power button

4. Functional LED logo

5. Filament entry port

6. Filament movement sensor /

Filament exit port

7. Desiccant tube

8. Attaching / Detaching connectors

9. Power socket

Drywise User Manual6

Physical Dimensions

Dimensions (520*500*145) (inc. Desiccant container 590*500*145)

Net Weight 10kg (inc. Desiccant container 10.5kg)

Shipping Weight around 12kg

Electrical Requirements

Voltage 100 – 240 VAC

Frequency 50 – 60 Hz

Power Max. 350W

Warranty

Twenty four (24) months in EU countries and twelve (12)

months

outside of EU countries.

4.1. Unboxing

In order to respect our environment we have opted to use mostly cardboard as our

packaging material. Kindly recycle the packaging material or dispose of according to

local legislation in order to help reduce the environmental footprint.

Place the box vertically with the sticker facing the right way up. Open the packaging

tape and fold out the cardboard ﬂaps. Take hold of the inner packaging and pull out

the packaging and the device. Remove the support blocks and place the device on a

solid surface. All the remaining accessories are packed in the secondary box that you

should ﬁnd in the main packaging.

4. Installation

Drywise User Manual 7

a - Drywise machine

b - Power cord

c - Desiccant tube ﬁlled with desiccant (x2)

d - Filament tip sharpener

e - Spare o-rings bag

f - Port closing kit

g - Heat resistant gloves

h - USB to USB-C cable

i - Spool holder

j - SD card

k - User Manual

4.2. What’s in the box

i j k

Drywise User Manual8

4.3. Hardware installation and ﬁrst interaction

a) Remove shipping screw

For shipping purposes, the pump inside the

device is secured with the help of a screw. This

needs to be removed before the operation of the

device. The screw is clearly shown in the image.

Remove the screw and store this for future use if

needed.

d) Attach desiccant tube

Attach the desiccant tube as shown in image.

Both clips should snap into place and click.

b) Install the bowden tube

A bowden tube can be attached to the out-

put port to facilitate the movement of the ﬁla-

ment and avoid any entanglements. To insert a

bowden tube, connect the provided connector

by screwing it in place, then push a length of

bowden tubing securely in the connector.

c) Attach spool holder base

To install the spool holder, remove the 4 screws

as shown in the image. Place the spool holder

base and align the holes. Secure the spool hold-

er base in place with the 4 screws that you have

just removed. The cylindrical part of the spool

holder can then be screwed in place.

Drywise User Manual 9

e) Place the Drywise machine near 3D printer

• Place the Drywise machine as close to the ﬁlament extruder of your 3D

printer as possible. A shorter path ensures less ﬁlament is exposed to the

atmosphere after being properly dried. It might also mean less setup time

before printing can be started.

• Do not obstruct the air outﬂow from the right hand side of the device (when

looking at the Drywise from the front) as warm air needs to be expelled

from here.

• Make sure the ﬁlament paths to the Drywise machine and from the Drywise

to the printer are not obstructed so that there is no chance for the ﬁlament

to get snagged.

f) Attach the power cord to the device and plug it in a mains socket.

g) Switch on the device and follow the instructions on the touchscreen.

Drywise User Manual10

5.1. Recommendations

Ensure that the Drywise machine is placed in a suitable position and environment.

The device should be in an upright position on a solid surface. For the best

performance it should be operated at an ambient temperature of between 15 and

35oC (59 - 95oF).

Ensure that there is at least 10cm of free space to the right side of the Drywise device

for unrestricted airﬂow. When in use the device should be positioned out of direct

sunlight and away from liquids or humidity.

5. Operation

Always check that the ﬁlament can move freely without any obstructions from the

dryer to the printer as these can hamper the operation of the device.

Inhaltsverzeichnis

Andere DRYWISE 3D-Drucker Handbücher

DRYWISE

DRYWISE 600591440003 Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch