Dukane 9100WUSS Bedienungsanleitung
1
DLP
®Projector
9100WUSS
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, read all manuals for this product.
Be sure to read Safety Guide rst. After reading them, store them in a safe
place for future reference.
WARNING
NOTE
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect handling.
Refer to the pages written following this symbol.
NOTICE This entry notices of fear of causing trouble.
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
9100WUSS-User-manual-00
2
Contents
Introduction ...............3
Checking the contents of package
....3
Part names ....................4
Projector, Control panel and Indicators,
Ports, Remote control
Setting up .................8
Installing the lens unit ............9
Arrangement ..................10
Connecting with your devices .....13
Using the security slot ...........18
Installation of the projector .......19
Remote control ...........21
Installing the batteries ...........21
Using the REMOTE ID function. . . .22
About the remote control signal ...23
Power on/off ..............24
Turning on the power ...........24
Turning off the power ...........24
Operating ................25
Selecting an input signal .........25
Selecting an aspect ratio .........26
Adjusting the projector's angle,
Lens Shift, Zoom, Lens Centering,
and Focus
...................27
Using the automatic adjustment feature
. . 30
Other buttons ..................30
Correcting the distortion .........31
Using the EDGE BLENDING features
. . 34
Using the magnify feature ........38
Temporarily freezing the screen ...39
Temporarily blanking the screen ...39
PbyP (Picture by Picture) /
PinP (Picture in Picture) . . 40
Using the menu function .........44
Indication in OSD,
Containing items of each menu
EASY MENU. . . . . . . . . . . . . . . 47
PICTURE menu ............48
IMAGE menu ..............52
INPUT menu ..............53
SETUP menu ..............54
SCREEN menu.............57
OPTION menu .............58
NETWORK menu ...........62
Web Control...............65
Maintenance ..............67
Cleaning the ventilation inlet .....67
Other care ....................68
Troubleshooting ...........70
Related messages .............70
Regarding the indicator .........71
Resetting all settings ............72
Phenomena that may be easy to
be mistaken for machine defects
. . 73
Specications .............79
3
Introduction
Introduction
• Keep the original packing materials for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
NOTE
Checking the contents of package
See the Contents of package section in the User’s Manual (booklet). Your
projector should come with the items shown there. Require of your dealer
immediately if any items are missing.
►Keep small parts away from children and pets. Take care not
to put in the mouth. If swallowed, consult a physician immediately for emergency
treatment.
WARNING
4
Introduction
Part names
Projector
(1) Mount cap (19)
(2) Adjustable foot (x4) (27)
(3) Remote sensor (23, 61)
(4) Ventilation inlet
(5) Control panel (5)
(6) AC (AC inlet) (19)
(7) Ventilation inlet
(8) Ventilation outlet
(9) Ports (6)
(10) Security slot (18)
►Do not open or remove any portion of the product, unless
the manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this product. Remove all the attachments
including the power cord and cables, from the projector when carrying the
projector.
►Do not look into the lens and the openings on the projector while the light
source is on since the projection ray may cause a trouble on your eyes.
►Keep any object away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in re or smoke.
►Do not touch around the ventilation outlet during use or just after use,
since it is too hot.
WARNING
►Do not attach anything onto the lens except the lens
cover of this projector because it could damage the lens, such as melting the
lens.
CAUTION
(continued on next page)
(1)
(2)
(2)
(3)
(4)
(5)
(6)
(8)
(9)
(3)
(7)
(10)
5
Control panel and Indicators
(1) STANDBY/ON button
(2) INPUT button
(3) AUTO button
(4) ASPECT button
(5) LENS CENTERING button
(6) BLANK button
(7) MENU button
(8) ▲/▼/◄/► cursor buttons
(9) ENTER button
(10) EXIT button
(11) LENS SHIFT button
(12) FOCUS button
(13) ZOOM button
(14) POWER indicator
(15) STATUS indicator
(16) LIGHT indicator
(17) TEMP. indicator
Introduction
Part names (continued)
(continued on next page)
POWER
STATUS
LIGHT
TEMP.
(1) (2) (3) (4) (5) (6)
(7) (8) (9) (10) (11) (12) (13)
(17) (16) (15) (14)
6
Ports (13~17)
(1) COMPUTER IN1 port
(2) COMPUTER IN2 port
(3) CONTROL port
(4) HDBaseT/LAN port
(5) HDMI 1 port
(6) HDMI 2 port
(7) DVI-D port
(8) SDI IN/OUT port
(9) REMOTE CONTROL port
(10) 12V OUTPUT (OPTION) port
Introduction
Part names (continued)
LAN
IN OUT
SDI
COMPUTERIN2
REMOTE
CONTROL HDBaseT HDMI1 DVI-D HDMI2
CONTROL V H B/Cb/Pb G/Y R/Cr/Pr COMPUTERIN1
(10) (3) (2) (1)
(9) (4) (5) (7) (8) (6)
(continued on next page)
7
Introduction
Part names (continued)
• Any button marked with “*” is not supported on this projector (70).
• Some keys are unavailable when OSD MESSAGE is set to INHIBIT(56).
NOTE
Remote control
(1) STANDBY button
(2) ON button
(3) VOLUME + / - buttons *
(4) AV MUTE button
(5) COMPUTER 1 button
(6) COMPUTER 2 button
(7) VIDEO button *
(8) LAN button *
(9) USB TYPE A button *
(10) USB TYPE B button *
(11) HDMI 1 button
(12) HDMI 2 button
(13) Display Port button *
(14) HDBaseT button
(15) SDI button
(16) DIGITAL button
(17) FOCUS + / - button
(18) LENS MEMORY SAVE / LOAD button
(19) SHIFT button
(20) ZOOM + / - buttons
(21) GEOMETRY button
(22) ASPECT button
(23) PICTURE button
(24) FREEZE button
(25) PbyP button
(26) MAGNIFY ON / OFF buttons
(27) MY BUTTON - 1 / 2 / 3 / 4 buttons
(28) MENU button
(29) RESET button
(30) ENTER button
(31) ▲/▼/◄/► cursor buttons
(32) ID-1 / 2 / 3 / 4 buttons
(33) OSD MSG button
(34) NETWORK button
(35) INTERACTIVE button *
(36) INFO button
(2)
(6)
(7)
(9)
(10)
(12)
(13)
(15)
(16)
(20)
(33)
(30)
(28)
(34)
(35)
(26)
(3)
(27)
INFO
NETWORK
INTERACTIVE
(1)
(32)
(5)
(8)
(11)
(14)
(17)
(18)
(19)
(4)
(31)
(29)
(23)
(21)
(25)
(24)
(36)
(22)
8
Setting up
Setting up
Install the projector according to the
environment and manner the projector will be
used in.
For the case of installation in a special state
such as ceiling mount, the speci ed mounting
accessories and service may be required.
Before installing the projector, consult your
dealer about your installation.
When there are the obstacles on both sides of the projector.
When there are the obstacles behind the projector.
30cm or greater 30cm or greater
50cm or greater
(continued on next page)
Lens
9
Installing the lens unit
See the manual of the optional lens.
Setting up
Positioning Precautions
Although this projector can be installed in 360° range (including Portrait), life of
optical parts will be shorten in the following situation:
1. If the projector is installed with the lens facing downward.
2. If the projector is installed with the IO ports side facing upward at the Portrait
situation.
270°
90°
0°
180°
Tilt position
Portrait position
Installing the projector with
the lens facing downward
is not recommended.
Installing the projector with
the IO ports side facing
upward is not recommended.
Note: The Dukane model described in this document is manufactured by
Hitachi and uses the same firmware, software programs, control code, and
accessory parts. The equivalent Dukane to Hitachi model is 9100WUSS
(LP-WU9100B).
10
Setting up
Arrangement
Refer to "Throw distance" in User’s Manual (booklet) for details.
Ⓗ×Ⓥ : Screen size
ⓐ : Projection distance (from the front of the projector unit)
Projector top
Projector bottom
NOTE • The installation position and the operating environment such as
temperature, altitude may affect the brightness of the display.
(continued on next page)
Andere Handbücher für 9100WUSS
1
Inhaltsverzeichnis
Andere Dukane Projektor Handbücher
Dukane
Dukane ImagePro 8065 Bedienungsanleitung
Dukane
Dukane ImagePro 8913H Bedienungsanleitung
Dukane
Dukane 8933WC Bedienungsanleitung
Dukane
Dukane ImagePro 8943 Bedienungsanleitung
Dukane
Dukane ImagePro 8800 Bedienungsanleitung
Dukane
Dukane ImagePro 8806 Handbuch
Dukane
Dukane 8950WSS Technisches Dokument
Dukane
Dukane ImagePro 8943 Betriebsanleitung
Dukane
Dukane 8112 Bedienungsanleitung
Dukane
Dukane ImagePro 6780WU Bedienungsanleitung
Dukane
Dukane ImagePro 8911 Bedienungsanleitung
Dukane
Dukane 8112 Bedienungsanleitung
Dukane
Dukane ImagePro 8711 Bedienungsanleitung
Dukane
Dukane Starfire HD 4010 Bedienungsanleitung
Dukane
Dukane 8937 Bedienungsanleitung
Dukane
Dukane ImagePro 9015 Bedienungsanleitung
Dukane
Dukane 28A8052 Bedienungsanleitung
Dukane
Dukane 8786 Bedienungsanleitung
Dukane
Dukane ImagePro 8777 Bedienungsanleitung
Dukane
Dukane ImagePro 8421A Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
