Dukane ImagePro 8913-W Bedienungsanleitung
LCD Projector
Model 8913-W
USER’S MANUAL
080010
1
ENGLISH
Projector
8913-W
User's Manual (concise)
Thank you for purchasing this projector.
WARNING ►Before using this product, be sure to read all manuals for this
product. See “Using the CD manual” (15) to read the manuals in the CD.
After reading them, store them in a safe place for future reference.
Contents
NOTE •
Keep the original packing materials for future reshipment. Be sure to use the
original packing materials when moving the projector. Use special caution for the lens.
•
To use the wireless network function, the designated wireless network card that is sold
as an option is required.
Contents of package........................... 1
Preparations ....................................... 2
Fastening the lens cover................................. 2
Loading batteries into the remote control........ 2
Arrangement....................................... 3
Connecting your devices .................... 4
Using a USB storage ...................................... 6
Using an SD card............................................ 6
Connecting power supply ................... 7
Turning on the power.......................... 7
Adjusting the projector’s elevator ....... 8
Displaying the picture ......................... 9
Turning off the power........................ 10
Replacing the lamp........................... 11
Cleaning and replacing the air lter.. 13
Replacing the internal clock battery.. 14
Using the CD manual ....................... 15
Regulatory notices............................ 16
Specications ................................... 18
Warranty and after-service ............... 19
Contents of package
Your projector should come with the items
shown below. Check that all the items are
included. Contact to your dealer immediately
if any items are missing.
(1) Remote control with two AA batteries
(2) Power cord
(3) RGB cable
(4) Audio/Video cable
(5) Lens cover and Strap
Lens cover is attached to the projector.
(6) User’s manuals (Book x1, CD x1)
(7) Soft case
(8) Security label
(9) Slot cover lock
(10) Application CD
(1)
(2)
(3)
(4)
(6)
(7)
(8)
(5)
HOME
PAGE UP
PAGE DOWN
END
VIDEO SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE
MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
(9) (10)
2
Fastening the lens cover
To avoid losing the lens cover, please fasten the lens cover
to the projector using the enclosed strap.
1. Fix the strap to the strap hole of the lens cover.
Thread one end of the strap through the strap hole of
the lens cover and make the loop at the end, and let the
other end of the strap through the loop. Not have a knot
in the strap at either end.
2. Fix the strap to the strap hole of the projector. Thread
the other end of the strap through the strap hole of the projector and make
the loop there. Let the lens cover with the one end of strap through the loop.
Preparations
Loading batteries into the remote control
Please set the batteries to the remote control before using it. If the remote control
starts to malfunction, try to replace the batteries. If you will not use the remote
control for long period, remove the batteries from the remote control and store
them in a safe place.
1. Holding the hook part of the battery
cover, remove it.
2. Align and insert the two AA batteries
(HITACHI MAXELL, Part No.LR6 or R6P)
according to their plus and minus terminals
as indicated in the remote control.
3.
Replace the battery cover in the direction
of the arrow and snap it back into place.
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in re, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specied. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
•
Do not allow a battery in a re or water. Keep batteries in a dark, cool and dry place.
•
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
•
Obey the local laws on disposing the battery.
3
ENGLISH
On a horizontal surface
Suspended from the ceiling
• Keep a space of 30 cm or more between
the sides of the projector and other objects
such as walls.
•
Consult with your dealer before a special
installation such as suspending from a ceiling.
WARNING ►Install the projector in a stable horizontal position.
►
Place the projector in a cool place, and ensure that there is sufcient ventilation.
►Do not place the projector anyplace where it may get wet.
CAUTION ►Avoid placing the projector in smoky, humid or dusty place.
►Position the projector to prevent light from directly hitting the projector’s
remote sensor.
Screen size
(diagonal)
4 : 3 screen 16 : 9 screen
Projection distance Screen
height
Screen
height
Projection distance Screen
height
Screen
height
min. max. min. max.
inch m m inch m inch cm inch cm inch m inch m inch cm inch cm inch
30 0.8 0.9 34 1.1 41 41 16 5 2 1.0 38 1.1 45 39 15 -1 0
40 1.0 1.2 46 1.4 56 55 22 6 2 1.3 50 1.5 61 51 20 -2 -1
50 1.3 1.5 58 1.8 70 69 27 8 3 1.6 63 1.9 76 64 25 -2 -1
60 1.5 1.8 70 2.1 84 82 32 9 4 1.9 76 2.3 91 77 30 -2 -1
70 1.8 2.1 81 2.5 98 96 38 11 4 2.3 89 2.7 107 90 35 -3 -1
80 2.0 2.4 93 2.8 112 110 43 12 5 2.6 102 3.1 122 103 41 -3 -1
90 2.3 2.7 105 3.2 126 123 49 14 5 2.9 115 3.5 138 116 46 -4 -1
100 2.5 3.0 117 3.6 140 137 54 15 6 3.2 127 3.9 153 129 51 -4 -2
120 3.0 3.6 140 4.3 169 165 65 18 7 3.9 153 4.7 184 154 61 -5 -2
150 3.8 4.5 176 5.4 211 206 81 23 9 4.9 192 5.8 230 193 76 -6 -2
200 5.1 6.0 235 7.2 282 274 108 30 12 6.5 256 7.8 307 257 101 -8 -3
250 6.4 7.5 294 9.0 353 343 135 38 15 8.1 320 9.8 384 322 127 -10 -4
300 7.6 9.0 352 10.8 423 411 162 46 18 9.8 384 11.7 461 386 152 -12 -5
b
abc1
c1 c2 c2
Arrangement
Refer to the illustrations and tables below to determine screen size and projection distance.
The values shown in the table are calculated for a full size screen: 1024×768
a Screen size (diagonal)
b Projection distance (±10%)
c1 , c2 Screen height (±10%)
4
RGB IN
AUDIO IN
Y Cb/PbCr/Pr
COMPONENT VIDEO OUT
L R
AUDIO OUT VIDEO OUT L R
AUDIO OUT
L R
AUDIO OUT S-VIDEO OUT
AUDIO OUT RGB OUT
AUDIO OUT
USB
RGB OUT
RS-232C
HDMI OUT
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations
to connect them.
VCR/DVD
player
Speakers
PC Monitor
(continued on next page)
5
ENGLISH
Connecting your devices (continued)
To use MIU (Multi Information processing Unit) function, please connect at least
one of the devices drawn in the following illustration to the projector.
SD CARD
LAN
WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about non-
accessory cables which may be required a specic length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with
the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
(continued on next page)
SD card
USB storage
PC
6
Connecting your devices (continued)
WARNING ►Do not disassemble or modify the projector and accessories.
► Do not touch the SD card while being accessed.
CAUTION ►The designated wireless network card that is sold as an option
is required to use the wireless network function of this projector.
►The wireless network card is not permitted to be sold or used in some
countries and regions. Use the card only in the country or region where you buy
it. For more information, contact to your dealer.
NOTE •
When using the projector with a wired LAN, please remove the wireless network card.
Using a USB storage
In order to view images stored in a USB storage, such as a USB memory, insert the device
into the USB STORAGE slot.
Before removing the USB storage, be sure to perform the REMOVE MEDIA procedure
using the PC-LESS PRESENTATION menu under the MIU menu.
Using an SD card
In order to view images stored in an SD storage,
such as an SD memory card, insert the device
into the SD card slot. Or, in order to use the
wireless network function, load the internal clock
battery (14) and insert the designated wireless
network card into the SD card slot.
Inserting the SD card
1. Make sure that the power code is not plugged into the projector for the wireless
network card only.
2. Remove the SD card slot cover. To remove it, it might be recommended to hook the
edge of its side face upward.
3. Slowly insert the SD card completely into the SD card slot. Make sure that the angled
corner of the SD card is placed into the right side of the SD card slot, while inserting.
4. Replace the SD card slot cover. It is recommended that the cover is slid sideways to
the projector.
Using the slot cover lock for security
Using the enclosed slot cover lock can prevent the SD card slot cover from being opened.
1. Open the two plates of the slot cover lock to put the tips of two plates together, and
then insert the tips to the lock hole of the SD card slot cover.
2. Put the body of the two plates together. Then, hook a padlock or combination lock to
the hole of the slot cover lock.
Removing the SD card
1. Perform the REMOVE MEDIA procedure using the PC-LESS PRESENTATION menu
under the MIU menu for SD Storage card only.
2. Turn the projector off and unplug the power code from the projector for the wireless
network card only.
3. Remove the SD card slot cover. After taking the SD card away, replace the SD card
slot cover.
SD card slot cover
SD CARD SD CARD
Slot cover lock
7
ENGLISH
HOME
PAGE UP
PAGE DOWN
END
VIDEO SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE
MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
Connecting power supply
1. Put the connector of the power cord into the
AC inlet of the projector.
2. Firmly plug the power cord’s plug into the
outlet.
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in re and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
to your dealer to newly get correct one.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Never modify the power cord.
AC inlet Power cord
Turning on the power
1. Make sure that the power cord is rmly and
correctly connected to the projector and the
outlet.
2. Remove the lens cover, and set the power
switch to the ON position (marked “׀”).
3. Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the POWER
indicator will begin blinking in green. When the
power is completely on, the indicator will stop
blinking and light in steady green.
WARNING ►
A strong light is emitted when the projector’s power is on. Do not look into
the lens of the projector or look inside of the projector through any of the projector’s openings.
NOTE • Please power on the projector prior to the connected devices.
• When the AUTO ON of the OPTION menu is set to the TURN ON, and the
power was turned off by the power switch last time, turning the power switch on
makes the projection lamp light on without pushing the STANDBY/ON button.
For more information, please see the “Operating Guide” in the CD.
STANDBY/ON button
POWER indicator
Power switch
8
Adjusting the projector's elevator
When the place to put the projector is slightly uneven to
the left or right, use the elevator feet to place the projector
horizontally.
Using the feet can also tilt the projector in order to project at a suitable angle to
the screen, elevating the front side of the projector within 10 degrees.
This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is
adjustable while pushing the elevator button on the same side as it.
1. Holding the projector, push the elevator buttons to loose the elevator feet.
2. Position the front side of the projector to the desired height.
3. Release the elevator buttons in order to lock the elevator feet.
4. After making sure that the elevator feet are locked, put the projector gently.
5. If necessary, the elevator feet can be manually twisted to make more precise
adjustments. Hold the projector when twisting the feet.
10°
To loose an elevator foot, push the
elevator button on the same side as it.
CAUTION ►Do not handle the elevator buttons without holding the
projector, since the projector may drop down.
►Do not tilt the projector other than elevating its front within 10 degrees using
the adjuster feet. A tilt of the projector exceeding the restriction could cause
malfunction or shortening the lifetime of consumables, or the projector itself.
To nely adjust, twist the foot.
Andere Handbücher für ImagePro 8913-W
1
Inhaltsverzeichnis
Andere Dukane Projektor Handbücher
Dukane
Dukane ImagePro 8758 Bedienungsanleitung
Dukane
Dukane ImagePro 8913H Bedienungsanleitung
Dukane
Dukane ImagePro 8065 Bedienungsanleitung
Dukane
Dukane 8928C Bedienungsanleitung
Dukane
Dukane 8962WU Bedienungsanleitung
Dukane
Dukane 8917H Bedienungsanleitung
Dukane
Dukane ImagePro 8774 Bedienungsanleitung
Dukane
Dukane ImagePro 6860WUSS Bedienungsanleitung
Dukane
Dukane 6640W Bedienungsanleitung
Dukane
Dukane ImagePro 8044 Bedienungsanleitung
Dukane
Dukane ImagePro 8049A Bedienungsanleitung
Dukane
Dukane 8121WI Bedienungsanleitung
Dukane
Dukane 8922H-RJ Bedienungsanleitung
Dukane
Dukane ImagePro 8077 Bedienungsanleitung
Dukane
Dukane ImagePro 8105H Bedienungsanleitung
Dukane
Dukane 8934 Bedienungsanleitung
Dukane
Dukane ImagePro 6780WU Bedienungsanleitung
Dukane
Dukane ImagePro 8070 Bedienungsanleitung
Dukane
Dukane ImagePro 8956H-RJ Installations- und Betriebshandbuch
Dukane
Dukane ImagePro 8912H Bedienungsanleitung
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
