Installation and Operation of: Product Name
Duke Manufacturing Co.
2305 N. Broadway
St. Louis, MO 63102
Phone: 314-231-1130
Toll Free: 1-800-735-3853
Fax: 314-231-5074 www.dukemfg.com
Turn o unit and disconnect power cord.
Using channel locks loosen and move strain
relief nut back on wire.
Gently pull power cord out from strain relief.
Reverse operation to install new or current
power cord.
Reconnect power cord to power and test
unit for proper operation.
A. Using a 3/8 nut driver disconnect the main
ground wire.
B. Disconnect the two main wires.
INSTRUCTIONS
1
2
3
4
5
12
Remove side access panel by removing all
screws holding panel in place.
A
B
