Duplo INSTRUCTION MANUAL Bedienungsanleitung

INSTRUCTION MANUAL

SYSTEM5000

Dynamic Booklet Maker

DBM-500

[ for 120 V ]

Be sure to read this manual prior to use.

Please leave this manual at the site of use for easy reference.

Applicable to the 120 V machine

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required

to correct the interference at his own expense.

1. SAFETY PRECAUTIONS................................ 2

2. USAGE PRECAUTIONS ................................. 5

2-1. Power Supply ..................................................5

2-2. Operating Environment ................................... 5

2-3. Storage Conditions ......................................... 5

3. NAMES AND FUNCTIONS ............................. 6

3-1. External Parts ................................................. 6

3-2. Internal Parts...................................................8

3-3. Downstream Unit (Optional)..........................11

3-4. Accessories...................................................11

4. NAMES AND FUNCTIONS OF CONTROL

PANEL (MAIN MENU)................................... 12

5. PREPARING FOR OPERATION................... 14

5-1. Power ON ..................................................... 14

5-2. Operations ....................................................15

5-3. Settings .........................................................19

6. SADDLE STITCHING PROCEDURE ............ 27

6-1. Settings .........................................................27

6-2. Changing Size............................................... 30

6-3. Adjustments Using the Step Mode................30

6-4. Checking the Finished Set ............................33

7. SIDE STITCHING/CORNER STITCHING

PROCEDURE ................................................ 38

7-1. Settings .........................................................38

7-2. Changing Size............................................... 41

7-3. Adjustments Using the Step Mode................42

7-4. Checking the Bound State ............................45

8. NO-STITCHING FOLDING PROCEDURE ... 46

8-1. Settings .........................................................46

8-2. Changing Size............................................... 48

8-3. Adjustments Using the Step Mode................49

8-4. Checking the Finished Set ............................52

CONTENTS

Thank you for purchasing this Duplo equipment. To ensure correct usage, please read this

instruction manual thoroughly, especially the section entitled "Safety Precautions".

The aim of this instruction manual is to ensure safe and proper use of the equipment.

For this reason, do not attempt to remodel, modify or adapt this equipment or to use it for any other

purpose than that intended by the manufacturer.

After reading, please keep this instruction manual handy for future reference.

9. VARIOUS SETTINGS.................................... 56

9-1. Fine Adjustment Menu .................................. 56

9-2. Option Menus................................................ 61

9-3. Accessory Menus.......................................... 63

9-4. Adjusting the Press Pressure and Conveyance

Pressure........................................................ 66

9-5. Adjusting the Saddle Stitching Guide/Side

Stitching Guide.............................................. 66

10. ERROR MESSAGES..................................... 67

10-1. Emergency Stop ...........................................67

10-2. Covers...........................................................67

10-3. Paper Jam.....................................................68

10-4. Wire Feed Detection ..................................... 68

10-5. Paper Tray Full .............................................68

10-6. Motor Error .................................................... 69

10-7. Service Person Error.....................................69

10-8. Shutter ..........................................................69

11. CORRECTING PAPER JAMS ...................... 70

12. STITCHER HEAD .......................................... 71

12-1. Names and Functions ................................... 71

12-2. Wire...............................................................72

12-3. Feeding the Wire........................................... 73

12-4. Stitching Tests ..............................................75

12-5. Removing Wire .............................................76

12-6. Adjustments ..................................................77

12-7. Maintenance .................................................78

13. TROUBLESHOOTING .................................. 79

14. CLEANING .................................................... 81

15. SPECIFICATIONS ......................................... 82

INTRODUCTION

Always observe the cautions and warnings given below to prevent personal injury or property

damage.

The degree of danger and damage that could occur is indicated on two levels by the

following marks.

WARNING: Ignoring this mark could result in the possibility of serious injury

or even death.

CAUTION: Ignoring this mark could result in the possibility of injury or

physical damage.

The following graphic symbols indicate the various types of action to be performed

or avoided.

This graphic symbol indicates a forbidden action.

means “Do not disassemble.”

means “Do not touch.”

This graphic symbol indicates actions that must be performed.

means “Disconnect the power plug.”

WARNING:

Do not place metal objects or vessels containing liquids on top of the unit. The entry of

any metal object or liquid could result in a fire or an electrical shock.

Do not insert any metal or easily-combustible object inside this unit. This could result in

a fire or an electrical shock.

Do not touch or insert foreign objects into any rotating part during operation. This could

result in injury.

Do not remove the cover or back panel. This unit contains high-voltage components that

could cause an electrical shock.

Do not disassemble, modify or repair this unit. There is a danger of fire, electrical shock

or injury. Contact your dealer when repairs are necessary.

Use only the power supply voltage specified on the main nameplate. Using other

voltages could result in a fire or an electrical shock.

Keep this unit and the power cord away from heaters and heater vents. Excessive heat

could melt the cover or power cord covering, and result in a fire or an electrical shock.

1. SAFETY PRECAUTIONS

Do not use flammable sprays or solvent inside or near the unit (e.g. when cleaning the

unit).

Such flammable gas or solvent may ignite and cause a fire or combustion.

Make sure that the combined power consumption of the appliances to be connected

does not exceed the capacity rating of the power outlets or plug receptacles. Exceeding

the capacity rating could cause the power outlets, plug receptacles, or power extension

cords to overheat and catch a fire.

Remove any dust that accumulates on the power plug prongs and the surface of the plug

from which the prongs extend. Accumulated dust could result in a fire.

If any foreign object such as metal or liquid should enter this unit, immediately turn the

unit off at the power switch and disconnect the power plug from the power outlet. Failure

to do so could result in a fire or an electrical shock. Contact your dealer immediately.

Do not damage the power cord or power plug. (Do not scratch, alter, bend, twist, pull or

place heavy objects on the power cord or power plug.)

This could result in damage, a fire or an electrical shock.

Always grip the plug when disconnecting the power plug from the power outlet. Forcibly

pulling on the power cord could cause damage, resulting in a fire or an electrical shock.

Do not touch the power plug or power switch with wet hands. This could result in an

electrical shock.

Before cleaning this unit, turn the unit off at the power switch and disconnect the power

plug from the power outlet. Accidental operation of the unit during cleaning could result

in injury.

CAUTION:

Always disconnect the power plug from the power outlet when the unit is not to be used

for an extended period. Failure to do so could result in fire due to leakage current if the

insulation should deteriorate.

Install this unit on a level, stable stand or floor, with sufficient space around it. Failure to

do so could result in the unit overturning and causing injury.

Do not install this unit in a location where there is excessive humidity or where contact

with water is possible. Poor choice of location could result in deterioration of the

insulation, fire or electrical shock.

Disconnect the power plug from the power outlet before attempting to move this unit.

Failure to do so could result in power cord damage, fire or electrical shock.

1. SAFETY PRECAUTIONS

Emergency Stop Switch

Shutter

Top cover (Front)

Top cover (Back)

Safety

The following shows the location of the safety devices and warning/Caution label.

NoteNote Labels are pasted to ensure the safety of users. Do not remove nor change them.

If a label becomes dirty or missing, be sure to contact your dealer for a new one.

The actual control panel and emergency stop switch of this machine may be located opposite to the locations shown

in the above figure.

2. USAGE PRECAUTIONS

2-1. Power Supply

• This equipment shall be installed near the socket-outlet where the plug on the power

supply cord is easily accessible.

•Make sure the power supply used is always within the following range.

220-240V AC 50Hz/120V AC 60Hz

•When you power other appliances from the same AC outlet, make sure that the combined

power consumption does not exceed the power supply capacity.

Rated power of this equipment : 3.8A/6.5A

2-2. Operating Environment

Operate this unit in the following environment:

•where the temperature range is between 5 and 35°C/41 and 95°F,

•where the humidity range is between 10 and 85%RH (no dew condensation),

•which is not subject to direct sunlight,

•which is subject to little or no vibration,

• where there are no harmful chemicals,

•which is reasonably free from dust,

•which is free from air-borne salt, and

•where the equipment will not be exposed to water.

2-3. Storage Conditions

Store this unit in the following environment:

•where the temperature range is between –10 and +50°C/14 and 122°F,

•where the humidity range is between 10 and 85%RH (no dew condensation),

•which is not subject to direct sunlight,

•which is subject to little or no vibration,

• where there are no harmful chemicals,

•which is reasonably free from dust,

•which is free from air-borne salt, and

•where the equipment will not be exposed to water.

3. NAMES AND FUNCTIONS

L side

R side

Paper direction

3-1. External Parts

No. Name Function

1Main power switch Refer to “5-1. Power ON”. ( Refer to page 14.)

2Emergency stop button Press to stop the machine in emergency. Paper being fed will stop halfway. To resume

operations, remove this paper. To stop the machine normally, use the [Stop Key] on

the upstream unit or this machine.

To release this switch, rotate it to the right.

3Front top cover Cover for ensuring user safety

This machine will not operate if open.

4Rear top cover Cover for ensuring user safety

This machine will not operate if open.

5Option connector Optional power connector

6E port connector-1 Connects the E port cable from the upstream unit.

7E port connector-2 Connects the E port cable to the downstream unit.

8D port connector-1 Connects the D port cable from the upstream unit.

9D port connector-2 Connects the D port cable to the downstream unit.

bk Power cord Supplies power to this machine.

bl Power switch Refer to “5-1. Power ON”. ( Refer to page 14.)

bm Stacker connector Connects the power cord of the belt stacker.

In this manual, the left side of the paper conveyance direction is indicated as L side and the right side as R side.

3. NAMES AND FUNCTIONS

No. Name Function

bn Wire reel Stitches paper

bo Control panel Refer to “Description of Control Panel”. ( Refer to page 12.)

bp Folding stopper adjustment dial Adjusts the angle of the folding stopper to correct folding misalignment.

bq Deflector strip Holds booklets sent to the side stitching stacker.

br Side stitching stacker Receives booklets which are side stitched (corner stitched).

bs Stacker plate Receives booklets which are saddle stitched, and folded.

When stacked poor due to small booklet size, use it at upper position.

bt Belt stacker Sends booklets folded into two to the stacker plate.

Connect the power cord plug of the Belt Stacker Unit to the outlet of the DBM-500

ck Paper guide wheel Holds paper sent to the stacker and feeds to the stacker plate.

cl Shutter Opening for inserting the handle Normally leave closed.

This machine will not operate if the shutter is open. ( Refer to pages 70 and 81.)

cm Handle Used to remove jammed paper and clean the folding stopper

cn Side stitching stopper Stops booklets which have been side stitched (corner stitched).

co Side stitching stopper adjustment Adjusts the position of the side stitching stopper.

knob

cp Ejection roller Ejects side stitched (corner stitched) booklets.

bn bo

cp cp

L side

R side

Paper direction

3. NAMES AND FUNCTIONS

No. Name Function

1Stitcher head Binds paper with wire.

2Side jogger Aligns the sides of paper.

3Side stitching stopper Rises during side stitching (corner stitching) to stop paper.

4Side stitching guide Prevents paper from curling during side stitching (corner stitching).

5Back jogger Aligns the leading and trailing edges of paper.

6Conveyance driven roller Helps to convey paper to the paper alignment section.

7Conveyance roller lifting handle Lift to remove paper jammed at the paper alignment section.

8Conveyance roller Conveys paper to the paper alignment section.

3-2. Internal Parts

Paper direction

When the conveyance roller open

Inhaltsverzeichnis

Andere Duplo Broschürenmacher Handbücher

Duplo

Duplo DF-1000 Bedienungsanleitung

Beliebte Broschürenmacher Handbücher anderer Marken

QMS

QMS QDOC Bedienungsanleitung

Plockmatic

Plockmatic SR85 Cover Feeder Bedienungsanleitung

Galaxy

Galaxy BOOKIT Bedienungsanleitung

MyBinding

MyBinding MBM 87M Bedienungsanleitung

Formax

Formax FD 160 Montageanleitung

QMS

QMS QDOC Bedienungsanleitung

Horizon Fitness

Horizon Fitness Bookletmaker SPF-200A Bedienungsanleitung

Mamo

Mamo Cuce A3 Digit Bedienungsanleitung

Morgana

Morgana BM 2000 Bedienungsanleitung

Akiles

Akiles Cardmac Pro Bedienungsanleitung

Ricoh

Ricoh BOOKLET MAKER BK5010 Service-Handbuch

Plockmatic

Plockmatic BLM 35 Bedienungsanleitung

Plockmatic

Plockmatic BOOKLET MAKER Pro 30 Bedienungsanleitung

Formax

Formax FD 215S Bedienungsanleitung

GBC

GBC GBC MultiBind 220 Bedienungsanleitung

Ricoh

Ricoh BK5010e Bedienungsanleitung

Ricoh

Ricoh SR3170 Kurzanleitung

MBM

MBM StitchFold Bedienungsanleitung