Duplo DC-646 Bedienungsanleitung

A circle with a line through it indicates a prohibited action.

The particular act prohibited is indicated by a picture inside the circle.

(In the example shown here, the prohibited act is disassembly.)

A black disc indicates an instruction, or sometimes a prohibited action.

The instruction itself is indicated by pictorial symbols drawn in white on the disc.

(In the example shown here, the instruction is “Remove the plug from the outlet”.)

●The precautions below are vital for safety and must be taken.

Warning Terminology

The following warning terminology is used in this installation manual.

Indicates a high degree of potential danger. Failure to heed the warning may lead to death or

serious injury.

Safety Precautions

WARNING

Indicates a medium degree of potential danger. Failure to heed the caution may lead to injury or

damage to property.

CAUTION

WARNING

●Use only the power cord that is provided among the accessories.

Insert the power cord plug ﬁrmly into the socket, so that proper electrical contact is effected.

→Use of any other power cord could result in imperfect grounding.

If grounding is imperfect and electrical leakage occurs, ﬁre or electric shock could result.

●Do not use a source voltage other than that speciﬁed. Do not connect two or more loads to a

single outlet. →Doing so may result in ﬁre or electric shock.

●Do not place the machine in a humid or dusty area. →Doing so may result in ﬁre or electric

shock.

CAUTION

●Do not place the machine in an unstable position, such as on an unsteady support or sloping

area.

→If the machine is dropped or falls over, this could result in personal injury.

●Once the machine is in position, secure in place using the casters.

→If the machine falls over, this could result in personal injury.

WARNING

Use this machine correctly in accordance with the instructions. Great care must be taken to

ensure person safety while installing, operating, checking, and maintaining this machine.

The maintenance including dangerous work, transportation or installation should be carried out

by a person with sufﬁcient knowledge and experience of this machine and system.

CAUTION

Never lay the machine on its side.

WARNING

This machine is heavy-weight equipment.

When moving it by using the casters, two or more persons are required. Pay extra attention to

slopes when transporting.

WARNING

Do not place the machine outside.

Rain drops, water, or dust may result in electric ﬁre, electric shock or malfunction.

CAUTION

Horizontally place the machine on a ﬂat hard ﬂoor that bears the weight of the machine, and

take actions for the machine not to fall over. Imperfect installation could result in dropping or

falling, causing personal injury .

WARNING

Do not touch the tools contained in each module.

Injury may result.

WARNING

Turn off the power before uninstalling, adjusting and installing the modules.

Operating temperature 10°C–30°C

Operating humidity 40%–70%

Storage temperature 0°C–50°C, no condensation

Storage humidity 10%–80%, no condensation

●Installation environment

Be sure to offer training in replacement of the tool, adjustment, and safety precautions to

customers who are in charge of maintenance when the machine is installed.

Instruct customers that replacement of the tool must be performed only by the trained person

in charge of maintenance.

Be sure to offer training in pressing and releasing the back-up rollers to customers who

are in charge of maintenance.

Procedures for contacting back-up rollers is described in this manual. Have customers keep

this manual at hand.

Duplo is not responsible for damage, injury, or any other troubles due to failure to observe

the description in this manual.

To All Dealers/Distributors

1. Unpacking Checks

1. Check the product name on the package.

Product name: DC-646

(The DC-646 includes 115V model, 230V model, ASIA model.)

2. Unpack the package.

Carry out unpacking in a place that is safe for the work.

3. Check the contents.

IMPORTANT

No. Name Part No. Q'ty Remarks

1 Power cord E1-8108* 1 115V model

2 Power cord L1-W126* 1 230V model , ASIAmodel

3 PC controller CD W5-Y198* 1

4 Card stacker 1

5 Support guide (for card stacker) W5-L232* 4

6 Guide assy (for card stacker) Y2-L208* 1

7 Side guide (for exit tray) 2

8 Side guide (for feed tray) 1

9 Upper guide 1

10 Back guide (for exit tray) 1

11 Back guide (for feed tray) 1

12 Back guide weight (for feed tray) 5

13 Plate (for PC) U7-M722* 1 115V (USA) model, 230V model

14 PC arm mount assy 1 115V (USA) model, 230V model

15 Screw (HSKW5×12) 7115V (USA) model, 230V model

16 Hexagon wrench XZ057 1

17 Shaft (tool) W5-G138* 1

18 Check sheet S2-Y104* 6

19 Coated paper

320×450 mm (230 gsm) 5

Used for pressure adjustment

when the driving roller and the

press roller are replaced. See the

service manual for adjustment

procedure.

20 Warning label K9-T140* 3 230V model

21 Warning label M7-T307* 2 230V model

22 Warning label sheet L8-T112* 4 230V model

23 Warning label W5-T135* 1 230V model

24 Warning label sheet P9-T301* 1 230V model

25 Label sheet U3-T114* 1 230V model

26 Label U3-T112* 1

27 Installation Manual W5-Y206* 1

28 Instruction Manual W5-Y204* 1

ACHTUNG

P9-T3010g

NOTA

P9-T3010s

ATTENTION

P9-T3010f

ATTENZIONE

P9-T3010i

P9-T3010r

P9-T3010

2510mm

2310mm

2570mm

1650mm

1110mm

(1745mm)

1540mm

1505mm

765mm

745mm

800mm800mm

2650mm

800mm

1000mm

(240mm)

800mm800mm

3250mm

800mm

2. Machine Dimensions and Required Space for Operation

Dimensions in ( ): DC-646 230V model,

DC-646 115V model

Andere Handbücher für DC-646

Inhaltsverzeichnis

Andere Duplo Cutter Handbücher

Duplo

Duplo DC-535 Bedienungsanleitung

Duplo

Duplo DC-618 Bedienungsanleitung

Duplo

Duplo DocuCutter DC-545HC Bedienungsanleitung

Duplo

Duplo DocuCutter CC-229 Kurzanleitung

Duplo

Duplo DocuCutter CC-228 Bauanleitung

Duplo

Duplo DocuCutter CC-330 Bauanleitung

Duplo

Duplo DocuCutter CC-330 Kurzanleitung

Duplo

Duplo DocuCutter DC-545 Installationsanleitung

Duplo

Duplo DC-618 Bedienungsanleitung

Duplo

Duplo DC-646 Bedienungsanleitung

Duplo

Duplo DocuCutter CC-229 Bauanleitung

Duplo

Duplo DocuCutter DPC-400 Bedienungsanleitung

Beliebte Cutter Handbücher anderer Marken

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Bedienungsanleitung

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Bedienungsanleitung

Makita

Makita 4112HS Bedienungsanleitung

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Bedienungsanleitung

Hitachi

Hitachi CM 4SB2 Fehlerbehebungshandbuch

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Bedienungsanleitung

GCC Technologies

GCC Technologies AFJ-24S Bedienungsanleitung

DeWalt

DeWalt XR LI-ION DCS350N Bedienungsanleitung

Baudat

Baudat ES1 Bedienungsanleitung

Mafell

Mafell ZAF 200 Leitfaden

Makita

Makita 4100NH Bedienungsanleitung

Formax

Formax FD 574 Bedienungsanleitung

EINHELL

EINHELL TE-MA 1500 Bedienungsanleitung

Husqvarna

Husqvarna Cut-n-Break K 760 Bedienungsanleitung

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Bedienungsanleitung

TRI tool

TRI tool 301A Bedienungsanleitung

Roller

Roller King 1 1/4 Bedienungsanleitung

RODCRAFT

RODCRAFT RC7170 Bedienungsanleitung