Duronic FH2KW1 Bedienungsanleitung

FH2KW1 - Fan Heater

PLEASE READ ALL THE INSTRUCTIONS BEFORE USE

English Manual

Manuel d’utilisation en français

Gebrauchsanleitung auf Deutsch

Manual de Instrucciones en Español

Manuale D’istruzioni In Italiano

Instrukcja obsługi. Polski

Contents

Gebruikershandleiding Nederlands

English Manual

Safety Instructions

• This appliance is for indoor/household use only. Do not use outdoors.

• This heater is not designed for commercial or industrial use; it is solely for

household use only.

• Ensure that the voltage is the same as indicated on the rating plate of the

heater.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Some parts of this product can become very hot and cause burns.

• Particular attention has to be given where children and vulnerable people

are present.

• Only use the heater out of the reach of children because the unit may get

very hot.

• If either the appliance or power cable are damaged, return it to Duronic for

service or repair by professional technician.

• Never open and repair the machine yourself. Do not modify the machine in

any way that is not described in the instructions for use.

• Always operate the appliance on a dry, smooth, even and stable surface.

• Always ensure that your hands are dry before operating or adjusting any

switch on the product or touching the plug and socket.

• Cleaning should be done as per instructions in this manual. Do not

immerse in water or other liquids.

• Do not insert or allow any foreign object to enter any intake or outlet

opening, as this may cause an electric shock, re or damage to the

appliance.

• Keep the appliance and cable away from sources of heat, sharp objects or

anything that might cause damage.

• In order to avoid overheating, do not cover the heater. To prevent a

possible re hazard, do not block the air intakes or the outlet in any way.

• Ensure the appliance is always switched off before connecting it to the

mains power supply.

• Switch off the power supply and unplug the appliance whenever it is not in

use, before cleaning it or carrying out any maintenance.

• This heater must not be located immediately below a mains plug socket.

• To disconnect the appliance, switch it “OFF”, and then remove the plug

from the socket.

• Do not pull the cable to unplug it.

• Do not operate in areas where petrol, paint or other ammable liquids are

used or stored.

• Do not touch the hot surfaces.

• Do not leave this appliance unattended when it is in use.

• The most common cause of overheating is deposits of dust or uff in the

appliance. Ensure these deposits are removed regularly by disconnecting

the appliance and then vacuum cleaning the air vents and grills.

• Place the cable in such a way that it is not in any high trafc area to avoid

it being tripped over or stood on.

• Do not put the heater away until it has cooled down completely. Store the

heater in cool dry location when not in use.

• This product is only suitable for well insulated spaces or occasional use.

• Remember, portable electric heaters are designed for spot heating, or as a

supplementary heat source. They are not intended to be main sources of

heat.

Features and Specications

Technical Specication

Model Voltage Frequency Power

FH2KW1 220-240V AC 50-60Hz 1200W-2000W

1. Temperature control dial

2. Pilot light

3. Power selection dial

4. Safety grill

Operating Instructions

FIRST USE

Upon rst use, there may be a trace of smoke or odour when the unit is

switched on. This is normal and will fade away quickly.

TURNING THE HEATER ON

1. Connect the Power

Place the heater on a at dry oor surface, within close proximity to a mains

plug socket. Plug in the power cable and switch on at the plug.

2. Switch on the Heater

Turn the Temperature Control Dial clockwise until you hear a click noise, this

means the temperature controller is on. The pilot light will glow. Adjust the dial

to the desired temperature level.

3. Select the Power Level

Turn on the Power Selection dial by selecting between 3 different levels: Cool

fan only / low heat (1200W) / high heat (2000W).

TURNING OFF THE HEATER

1. Turn the Power Selection Dial to the ‘OFF’ position.

2. Turn the Temperature Control Dial anticlockwise to the ‘MIN’

position.

3. Switch off at the plug socket and remove the plug from the socket.

4. If you plan to store the heater away, allow it to cool down rst beforehand.

Safety Protection

Pilot Light

This fan heater is equipped with a pilot light that glows whenever the heater is

plugged in and switched on. It will continue to glow, even when the thermostat

has cycled the heating elements off. The pilot light feature is there to prevent

you from being unaware that the heater is operating and maintaining the

temperature of the room. When you do not wish for the heater to control the

temperature in the room, turn the control dial to ‘MIN’, turn the Power Select

Dial to 'OFF' and switch the heater off at the plug socket.

Overheat Protection

When the temperature of the heater is too high due to an abnormality in

the use environment or due to improper use, the thermostat device can

automatically cut off the power and make the heater stop working.

After the heater has cooled down completely, check what the reason for

overheating may have been and rectify the problem. If it was obstruction,

remove the item covering the heater. After this, the heater can continue being

used as normal.

Tip: The most common cause of overheating is often due to deposits of dust or

uff entering the heater vents. To avoid this happening, ensure that you dust or

vacuum the air vents and front grill regularly.

Inversion Protection

When the whole heater is inverted/tipped over, the safety system will

automatically cut off the power. Once the heater has been placed in an upright

position again, the heater can continue to be used as normal.

Inhaltsverzeichnis

Sprachen:

Andere Duronic Heizung Handbücher

Duronic

Duronic CA30 Bedienungsanleitung

Duronic

Duronic HV052 Bedienungsanleitung

Duronic

Duronic FH15K Bedienungsanleitung

Duronic

Duronic BFH20 Bedienungsanleitung

Duronic

Duronic Mica HV180 Bedienungsanleitung

Duronic

Duronic HV120 Bedienungsanleitung

Duronic

Duronic Mica HV180 Bedienungsanleitung

Duronic

Duronic BFH21 Bedienungsanleitung

Duronic

Duronic HV220 Bedienungsanleitung

Duronic

Duronic HV051 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung