DVA 110DOOR Bedienungsanleitung

Quick Guide

1. Introduction

V150803-2

3. Connect the Device

Insert TF memory card and fix antenna, connect power supply. It takes

30 seconds to start device.

Step 1:

2. Install the App

Download the App ‘SafeSmart’ from ‘Google Play Store’ or ‘App Store’, and install

on mobile phone.

iOS !

NOTICE:

Android

Special Notice: When open the app, you will receive a tip. Please click ‘OK’ to

allow the notifications, otherwise, you cannot receive any notification.

Special Notice: Do not connect the network cable, otherwise, the device

cannot set the Wi-Fi by scanning QR code.

For the first time installation,

please tap ‘OK’. Otherwise

y o u c a n ’ t r e c e i v e a n y

notification.

Tamper switch

Reset

Thread hole

CDS Sensor

LENs

Speaker

Ring Button Microphone

IR LED light

Doorbell

Power in DC+(12V)(Red)

Antenna

Doorbell Relay COM(Gray)

Net RJ45(Orange&White)

Lock

Doorbell Relay NO(White)

Net RJ45(Orange)

Net RJ45(Green&White)

Net RJ45(Green)

Lock Relay COM(Yellow)

Lock Relay NO(Purple)

Power in DC-(12V)(Black)

Door phone

power supply

Lock Power

supply

Doorbell

Power supply

(DC12V 500mA)

All manuals and user guides at all-guides.com

all-guides.com

Step 3: Connect your mobile phone to your router.

Set device’s wifi by scanning QR code.

2. Input your ID

password

1. Input your e-mail Please Remember your ID

Wifi name

Input your wifi

password, then

tap ‘Next’.

Step 2: Connect your mobile phone to your router to register a user ID.

Special Notice: If 2 mobile phones use the same account ID to login at the same time, only 1

mobile phone can receive the push notification alarm ring. So if use 2 mobile phones to

connect the device, user should register 2 different account IDs for the 2 mobile phones.

Antenna

Power adaptar

Special Notice: Device don’t support 5Ghz WIFI,user should use 2.4GHz WIFI to connect.

Special Notice: Device don’t support WPA2-PSK (TKIP) and WPA-PSK/WPA2-PSK

(TKIP)encrypt mode, user should change to other encrypt modes like WPA-PSK(AES),

WPA2-PSK(AES), WPA-PSK(TKIP), WPA-PSK/WPA2-PSK(AES)or WEP.

All manuals and user guides at all-guides.com

Phone 10-15cm

ipad and tablet 20cm

“DING”

After you hear

the sound ‘DING’

23. Input your

device name

4 . I n p u t y o u r

device password,

then tap ‘Save’.

Aim the device at your smart phone’s QR code in 10-15cm distance (iPad and

tablet are 20cm). Once hear the sound ‘DING’, click ‘Heard’, it shows ‘Setting

Success’, device is connected to the Wi-Fi.

2. Click to

add device

1. Slide down to refresh

and find device.

Step 4: Add device. In 'Device List', slide down to find device.

Special Notice: If device have no 'Di.Di.Di.Di....' sound means the device has

scanned before. User should press the reset button for 5 seconds until hear

‘KING’ and scan after hearing the 'Di.Di.Di.Di....' notice sound.

Special Notice: Device is designed not able to scan QR code for 2 times. If want

to change Wifi in another place, user should press the reset button for 5 seconds

until hear ‘KING’ and scan after hearing the 'Di.Di.Di.Di....' notice sound.

Device will have 'Di.Di.Di.Di....' sound noticing user to scan Wifi QR code.

All manuals and user guides at all-guides.com

NOTICE:

If fail to scan the QR code, you could reset the device and retry. Or

connect wifi by using network cable. More details please refer to

PART9 & PART10.

NOTICE:

5. Date and Time

In “Device List-Device-Setting-Date and Time”, choose your Time Zone, and check if the

new time is right or not. If time is right, press apply to get network time automatically.

Scan QR code to set Wifi can be scanned only once. If user need to add device to

other mobile phones, user don’t need to scan Wifi QR code again. User should

press the button in the ‘device list’ to enter ‘Add Devices’ interface, press

‘Manual’ button and input device ID and password to add device.

4. Add device to another mobile phones.

Note: Device ID is in ‘Device List->Device->Edit’ as below.

All manuals and user guides at all-guides.com

Remark:

1. Set Time Zone

2. Check time is

right or not

3. Click to confirm

Time zone example: China UTC+8

Germany/France/Spain/Poland/Italy/Netherlands/Norway/Sweden UTC+1

UK/Portugal/Ireland UTC+0 Turkey/Romania/Finland UTC+2

Mexico UTC-6 Colombia/Ecuador/Peru UTC-5

Venezuela/Chile/Manaus UTC-4 Agentina/Uruguay UTC-3

6. Push Notification Ring

In order to receive the push notification from the device, you should turn on ‘Alarm Push’.

Step 1: !

NOTICE:

By tapping this icon, you

can delete the ID which

no need alarm push .

One device can push

alarm to 5 IDs at most.

All manuals and user guides at all-guides.com

Step 2: When people press the call button of the device or trigger the alarm, there

will be a notification received on the mobile phone screen. For Android,

press ‘check’ to view. For iphone, slide and press ‘view’ or to view.

NOTICE:

NOTICE: User must keep the app running at phone's background, user

can't force stop the app in phone's application manager, otherwise

phone can't receive any push notification.

7. View Interface

Date and

Time

Press and hold

for 3 seconds to

unlock. Then you

had to wait for 6

s e c o n d s t o

unlock again.

View HD image at

1280*720

View clear image at

640*360

View smooth image at

320*180

8. Video Record and Playback

Start recording. Insert the TF card (DO NOT insert or remove TF card when

device is power on). Enter ‘Device list→Device→Setting→Storage Info’

Click ‘Erase SD Card’ to format SD card. In ‘Device list→Device→Setting→

Record settings’ choose Record type and Record Time.

Step 1:

iOS

Android

Slide to view

Audio Snapshot Hangup Hear/Talk Button

All manuals and user guides at all-guides.com

all-guides.com

Step 2: Playback.

view playback.

In ‘Device list→Device→Playback' , chose the video file to

‘Device List→Setting→Security Settings’, choose ‘Admin password’ to modify

device’s password.

2 . C h o o s e t h e

recording time.

1 . C h o o s e ‘ A l a r m

Recording’ to record

when visitor press ring

b u t t o n o r s e n s o r s

triggered.

9. Modify device’s password

All manuals and user guides at all-guides.com

10. Reset the device

Press and hold the reset button

for 5 seconds and you will hear

a voice of ‘KING’, wait 30

seconds to restart the device.

11. Connect wifi by using network cable (Only used for the

QR code scanning is not available)

Step 1: Plug in a network cable to the device and the LAN plug of the router.

Step 2: Add device. In ‘device list’ slide down to find device.

3. Input your

device name

1.Slide down to refresh

and find device

2.Click

to add

device

4. Input your device

password, then tap

‘Save’.

Tap ‘Admin password’

Tap ‘Secrity Setting’

I n p u t t h e o l d

password and the

new password, then

tap ‘Save’.

All manuals and user guides at all-guides.com

Please confirm the correct Wi-Fi setting and insure the position with

good Wi-Fi signal before mounting on the wall. Otherwise, it needs to

relocate the router or the antenna direction to receive the good Wi-Fi

signal. If the Wi-Fi signal is still not strong enough, please add the Wi-Fi

repeater or use the network cable.Make a mounting hole similar size as

the back housing of the device. Drill a hole for the wires to go through

the wall.

Remark:

Choose ‘WIFI’

Choose the

WIFI

I n p u t w i f i

password and

tap ‘Ok’

Step 3: Set wifi. In

to set device WIFI.

‘Device list→Device→Setting→Network settings’ Choose ‘WIFI’

Notice: The wifi antenna should be installed inside the house to have better

signal.

12. Mount on the Wall

All manuals and user guides at all-guides.com

Step 3: Lead the wires through the hole in the wall, and put the device into the back

housing. Tighten the screw in the bottom.

Step 1: Drill a hole for the wires to go

through the wall

Step 2: Fix the back housing on the wall

with two screws

Step 5: Connect the wires of power supply, unlock signal, antenna, etc. in other side

of the wall.

Step 4: Locate the antenna clip on the wall with screws.

A d j u s t t h e

a n t e n n a

direction to have

the good signal

L o c a t e t h e

antenna clip on

t h e w a l l w i t h

screws.

All manuals and user guides at all-guides.com

Inhaltsverzeichnis

Andere DVA Gegensprechanlage Handbücher

DVA

DVA DVA-110DOOR Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung