DyGSM DY-GSM10B Bedienungsanleitung

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

1 2

Preface

Thank you for purchasing our GSM SecurityAlarm System (“The System”)!

The System will keep your home and property safe around the clock.

The GSM Security Alarm (“The Alarm”) adopts the most advanced Israeli digital

security technology, with a high reliability and low false alarm rate; it has a

simple design, but powerful functions, such as fire prevention, burglary

prevention, gas leak prevention, housebreaking prevention, SOS for emergent

diseases, etc. Meanwhile, you can also equip wired or wireless detectors, which

feature functions like anti-interference, false alarm prevention, missing alarm

prevention, user-friendly operations, etc. It is widely used for networking alarm in

houses, shops, convenience stores, accounting offices, villas, residence

communities and cities.

For your safety and giving full play to the functions of the Alarm, please read the

user manual carefully before installation and operation; if you have any trouble

during installing or operating, please contact with local dealers or authorized

technology service centers for help. You can also call us to solve troubles by our

professional technical engineers.

Note: To get the complete after-sale service of “Three Guarantees”, please don’t

remove the Alarm cover to repair or rebuild by yourself; in such cases, the

warranty will be void and we shall not be liable for any damage and negative

results.

Please keep the user manual for reference in the future.

CONTENTS

Introduction to Functions-------------------------------------------------------------------4

Introduction to the Main device-----------------------------------------------------------5

Function Setting-----------------------------------------------------------------------------7

Initialization----------------------------------------------------------------------------------7

Setting-----------------------------------------------------------------------------------------8

Exiting from Setting------------------------------------------------------------------------8

Recovering the default password----------------------------------------------------------8

Recovering factory settings----------------------------------------------------------------9

Code Pairing for Remote Controller------------------------------------------------------9

Deleting Remote Controller----------------------------------------------------------------9

Code Pairing for Zones--------------------------------------------------------------------10

Deleting Zones-----------------------------------------------------------------------------10

Changing Password------------------------------------------------------------------------11

Clock Setting-------------------------------------------------------------------------------11

Timing Setting-----------------------------------------------------------------------------12

Alarm Telephone Setting-----------------------------------------------------------------13

Deleting Alarm-Receiving Telephones-------------------------------------------------13

SMS-Receiving Phone Setting-----------------------------------------------------------14

Deleting SMS-Receiving Phones--------------------------------------------------------14

Zone Programming ------------------------------------------------------------------------15

Home Arming Setting---------------------------------------------------------------------16

Manual Recording-------------------------------------------------------------------------16

SOS Siren on Remote Controller--------------------------------------------------------17

Warning Tone for Arming Operation----------------------------------------------------17

Enabling Landline Phone-----------------------------------------------------------------17

Ringtone Times for Landline Phone Alarm--------------------------------------------17

Wireless Signal Output from the Main Device----------------------------------------18

Networking Center Settings (networking functions customized)-------------------18

Main Device Status------------------------------------------------------------------------19

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

3 4

Daily Operations----------------------------------------------------------------------- -20

AwayArming ---------------------------------------------------------------------------20

Home Arming----------------------------------------------------------------------------20

Disarming---------------------------------------------------------------------------------21

Answering Call Alarm-------------------------------------------------------------------21

Remote Control--------------------------------------------------------------------------22

SOS---------------------------------------------------------------------------------------23

Maintenance------------------------------------------------------------------------------24

System Inspection-----------------------------------------------------------------------25

Precautions-------------------------------------------------------------------------------25

Technical Parameters: ------------------------------------------------------------------25

Introduction to Functions

With dual network of GSM + telephone cable, the System is more secure and

reliable.

With the quad-band GSM module for global use.

Includes 2wired zones and 99 wireless zones.

Supports code pairing with 8wireless remote controllers at the most.

LCD screen with a built-in clock.

With voice prompts for easy operations.

Supports an external intercom speaker.

Supports 3 groups of timed arming and 3 groups of timed disarming.

The main device can dial alarm calls to 6preset phone numbers.

The main device can send text alarm to 3preset phone numbers.

With 10-second manual recording function to leave messages.

With a built-in digital voice device to give voice alarm automatically.

With built-in SMS service to send alarm messages automatically.

Supports wireless alarm siren and control by wireless devices

(customization).

With the One-Key-Control function, you can conduct Away Arming, Home

Arming, Remote Control Arming or Off-site Telephone Arming.

Alarm Location Programming: Help, Fire, Gas Leak, Door Lock, Living

Room, Window, Balcony, and Perimeter Alarm.

Includes multiple zone programming functions like Real-Time, Delay, 24

Hour, Bypass.

With Wireless Self-learning Code Pairing, new accessories can be installed

conveniently, safely and effectively.

Off-site remote control allows Main Device Arming, Disarming, Monitoring,

Intercom etc.

Arming Modes: Remote Control Real-Time Arming, Away Delayed Arming,

Home (Stay) Arming, Timing Arming, Off-site Telephone Remote Arming.

Line Seizure: If an alarm happens, the main device will cut off the busy line

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

5 6

and give priority to make a call for the alarm.

With a built-in 7.2V

lithium battery, it can power the Alarm during a

blackout.

Comply with the CCC Safety Standard and GB12663-2001 national

standard.

Compatible ADEMCO Contact ID protocol (customization).

Introduction to the Main device

To better receive the signals from all wireless detectors, the main device

should be installed in the center of the zone. Note that the main device should be

installed away from large metal objects or household appliances with

high-frequency interference, as well as barriers like reinforced concrete walls and

fireproof doors, etc.

Panel Diagrammatic Sketch:

Back Diagrammatic Sketch:

Sockets:

SP: Alarm Siren +12V: Power Adapter TEL: Telephone LINE: Exterior

Line

Connection Ports:

ANT: Pole connector for external GSM antenna.

AND:external GSM antenna grounding.

Z1/Z2: Wired zone (short-circuit alarm; the Alarm will display zone 98/99)

GND: Ground wire zone.

+12V: Power output of wired zones

Power: power indicator lamp；

SET: setting status indicator

lamps;

ARM: away arming lamps;

Home: home arming lamps;

Alarm：alarm lamps;

Signal: signal lamps;

Delete Key：Press the key to clear

input errors; if no digit is input, it

will make a warning tone.

SIM card

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

7 8

LCD Display:

Function Setting

Initialization

Install the SIM card to the main device, and connect the adapter to the main

device. After the LED lamp stays on and the icons on the LCD display for 2

seconds, the main device will gives a long beep, and then go into initialization.

After the System displays the correct time, it starts to detect the GSM network

until a normal network is obtained; then the main device gives a long beep, and

the signal strength will be displayed (a signal strength of at least 2 bars is

required), then the main device is in the state of disarming.

Finally, turn the switch of the backup battery to [ON].

Setting

Under the disarming state, input a four-digit password [XXXX], and press the [#]

key to confirm. When the main device makes a voice prompt “Please input

commands”, while the [SET] lamp stays on, and the LCD displays [Reset], it

indicates that the System is on the setting state. In this state, you can conduct

various function settings. If you don’t conduct any operation on the keypad for

over 40 seconds, the main device will auto exit from the setting state and return to

the disarming state.

Notes: Under the setting state, press the

key

to delete the input numbers.

The default ex-factory password is [8888].

Setting steps: 【XXXX】【#】

X: stands for a digit of the four-digit password, with the ex-factory value of

[8888].

Exiting from Setting

After completing the settings, press the [*] key and [#] key on the keypad

until you hear the sound of “Beep”, the System exits from the setting state. At this

time, the [SET] lamp goes off, and the System returns to the disarming state.

Setting steps:

【*】【#】

Recovering the default password

If you forget the password, we suggest you recover the ex-factory password,

and then set a new password for the main device.

Under the disarming state, input [95175308249], and press the [#] key to

confirm; after the [SET] indicator lamp stays on for 2 seconds, and the main

device gives a long beep, the ex-factory password is recovered, whereas all

settings remain the same.

Setting steps: [95175308249] 【#】

Dialing

Alarm

GSM Signal

Low

Zone Type

：

Fire, Emergency, Gas Leak,

Living room

, Window

Balcony

Gate Lock,

Perimeter

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

9 10

Recovering factory settings

If the System works unsteadily, or you have forgotten the previous setting

parameters, we suggest you recover the factory settings, and set new parameters

for the main device.

Under the disarming state, input [95175308246], and press the [#] key to

confirm; after the [LED] indicator lamps stay on for 2 seconds, and the main

device gives a long beep, the factory settings is recovered with all user settings

cleared.

Setting steps: [95175308246]

【#】

Code Pairing for Remote Controller

Code pairing shall be performed before the remote controller is used to

control the main device.

Under the setting state, input the address code [20], and press the serial

number of the remote controller with [1～

～～

～8] keys, and then press the [#] key to

confirm; at this time, the main device gives a long beep, and gives a voice prompt

of “Send codes by remote controller”; press a key on the remote controller to send

a wireless signal; after receiving the signal, the main device will gives a long beep,

and give a voice prompt of “Code pairing succeeded”.

Setting steps:

【

【【

【20】

】】

】【

【【

【A】

】】

】【

【【

【#】

】】

】

A: stands for the serial number of the remote controllers (1~8).

Deleting Remote Controller

After the remote controller is deleted, it cannot control the main device

any more.

Under the setting state, input the address code [21], and press the serial

number of the remote controller with [1～

～～

～8], and then press the [#] key to confirm.

After the main device gives a long beep and the [signal] lamp flashes once, the

System will give a voice prompt of “Successfully Deleted”. The deleted remote

controller will be out of work.

Setting steps:

【

【【

【21】

】】

】【

【【

【A】

】】

】【

【【

【#】

】】

】

A: stands for the serial number of the remoter controllers (1~8).

Code Pairing for Zones

Code pairing shall be performed between the wireless detectors and zones to

trigger alarm on the main device.

Under the setting state, input the address code [23], and press the serial

number of zone within [01~99], and then press the [#] key to confirm. After the

main device gives a long beep, the LCD screen displays the corresponding zone,

and the System will give a voice prompt of “Send codes by detector”; trigger the

detector you desire to match code, after the main device receives the signal, it will

gives a long beep, then the System will give a voice prompt of “Code pairing

succeeded”.

Setting steps:

【

【【

【23】

】】

】【

【【

【xx】

】】

】【

【【

【#】

】】

】

XX: stands for the serial number of the zone (01~99)

Deleting Zones

After a zone is deleted, it cannot trigger alarm on the main device any

more.

Under the setting state, input the address code [24], and press the serial

number of the zone you want to delete within [01~99], and then press the [#] key

to confirm. After the main device gives a long beep, the serial number of the

corresponding zone flashes once on the LCD, and the System will give a voice

prompt of “Successfully deleted”. The deleted zone cannot trigger alarm any

more.

Setting steps:

【

【【

【24】

】】

】【

【【

【xx】

】】

】【

【【

【#】

】】

】

XX: stands for the serial numbers of the zone (01~99)

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

11 12

Changing Password

1. User Password

The user password is the key to access the System when disarming or

conducting operations by the remote controller.

Under the setting state, input the address code [30], and input a four digit

password, and then press the [#] key to confirm; after the main device gives a

long beep, the System will give a voice prompt of “Successfully set”, then the

previous password has been changed.

Setting steps:

【

【【

【30】

】】

】【

【【

【XXXX】

】】

】【

【【

【#】

】】

】

XXXX: stands for the new four digit password.

Example: Change the password to 1012;

Setting steps: 【

【【

【30】

】】

】



【

【【

【1012】

】】

】



【

【【

【#】

】】

】

2. Engineering Password

The engineering password is the key to access function settings.

Under the setting state, input the address code [31], and input a four digit

password, and then press the [#] key to confirm; after the main device gives a

long beep, the System will give a voice prompt of “Successfully set”, then the

previous password has been changed.

Setting steps:

【

【【

【31】

】】

】【

【【

【XXXX】

】】

】【

【【

【#】

】】

】

XXXX: stands for the new four digit password.

Example: Change the password to 2846;

Setting steps: 【

【【

【31】

】】

】



【

【【

【2846】

】】

】



【

【【

【#】

】】

】

Notes: The engineering password cannot be the same as the user

password.

Clock Setting

Under the setting state, input the address code [32], and input digits of the

current hour (in 24-hour system) [AA]; and the minute [BB]; and then press the [#]

key to confirm. After the main device gives a long beep, the System will give a

voice prompt of “Successfully set”.

Setting steps:

【

【【

【32】

】】

】【

【【

【AA】

】】

】【

【【

【BB】

】】

】



【

【【

【#】

】】

】

AA: stands for the digits of hour of current time

(in 24-hour system)

BB: stands for the digits of minute of current time.

Example: the current time is 3:35 PM;

Setting steps: 【

【【

【32】

】】

】



【

【【

【15】

】】

】【

【【

【35】

】】

】



【

【【

【#】

】】

】

Timing Setting

1. Timing Arming

Under the setting state, input the address code [33~35], and input hour [AA]

and minute [BB] of the auto arming time, and then press the [#] key to confirm;

after the main device gives a long beep, the System will give a voice prompt of

“Successfully set”.

Setting steps:

【

【【

【XX】

】】

】



【

【【

【AA】

】】

】【

【【

【BB】

】】

】



【

【【

【#】

】】

】

XX: stands for the address code of 3 groups of timing auto-arming (33, 34, and

35).

AA:

stands for the hour of the auto-arming time.

BB: stands for the minute of the auto-arming time.

Example: the auto-arming time is 10:45 PM every day;

Setting steps:

【

【【

【33】

】】

】



【

【【

【22】

】】

】【

【【

【45】

】】

】



【

【【

【#】

】】

】

2. Timing Disarming

Under the setting state, input the address code [36~38], and press the hour

[AA] and the minute [BB] of the auto-disarming time, and then press the [#] key

to confirm; after the main device gives a long beep, the System will give a voice

prompt of “Successfully set”.

Setting steps:

【

【【

【XX】

】】

】



【

【【

【AA】

】】

】【

【【

【BB】

】】

】



【

【【

【#】

】】

】

XX: stands for the address code of 3 groups of timing auto-disarming (36, 37,

and 38).

AA:

stands for the hour of the auto-disarming.

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

13 14

BB: stands for the minute of the auto-disarming.

Example: the auto-disarming time is 7:55am per day;

Setting steps:

【

【【

【36】

】】

】



【

【【

【07】

】】

】【

【【

【55】

】】

】



【

【【

【#】

】】

】

3. Timing On/Off

Under the setting state, input the address code [39], and select the [1/0] key

to turn On/Off the timing arming/disarming function, and then press the [#] key to

confirm; after the main device gives a long beep, the System will give a voice

prompt of “Successfully set”. It is set to ON by default.

Setting steps:

【

【【

【39】

】】

】【

【【

【0/1】

】】

】【

【【

【#】

】】

】

0: stands for turning off all timing arming & disarming functions.

1: stands for turning on all timing arming & disarming functions.

Example: turn on the settings of the timing

arming & disarming functions;

Setting steps: 【

【【

【39】

】】

】



【

【【

【1】

】】

】



【

【【

【#】

】】

】

Alarm Telephone Setting

Under the setting state, input the address code [51] ~ [56], and enter a cell

phone (landline phone) number, and then press the [#] key to confirm. After the

main device gives a long beep, and the [signal] lamp flashes once, the System

will give a voice prompt of “Successfully set”.

Setting steps:

【

【【

【XX】

】】

】



【

【【

【YY…YY】

】】

】



【

【【

【#】

】】

】

XX: stands for the address codes for the 1~6 groups of alarm-receiving phone

(

[51] ~ [56]

)

YY…YY: stands for the set telephone number.

Example: set the 13811111111 as the first group of alarm telephone.

Setting steps

: 【51】【13811111111】【#】

DeletingAlarm-Receiving Telephones

Under the setting state, input the address code [51] ~ [56], and press the [#]

key to confirm. After the main device gives a long beep, the System will give a

voice prompt of “Successfully set” and the [signal] lamp flashes once, indicating

the telephone number has been deleted.

Setting steps:

【

【【

【XX】

】】

】



【

【【

【#】

】】

】

XX: stands for the address codes of the 1~6 group of alarm telephones (

[51] ~

[56]

Example: delete the third group of telephone number from the main device.

Setting steps: 【53】【#】

SMS-Receiving Phone Setting

If phones are set to receive text alarm, the System only sends an alarm

message to the 3 groups of cell phones (for example: zone 5, balcony alarm).

Under the setting state, input the address code [57] ~ [59], and input the cell

phone number, and then press the [#] key to confirm. After the main device gives

a long beep, the System will give a voice prompt of “Successfully set” and the

[signal] lamp flashes, indicating the SMS-receiving phone number has been set.

Setting steps:

【

【【

【XX】

】】

】



【

【【

【YY…YY】

】】

】



【

【【

【#】

】】

】

XX: stands for the address codes of the 1~3 group of SMS phone (

[57] ~ [59]

YY…YY: stands for the set telephone number.

Example: set the 13822222222 as the first group of SMS phone.

Setting steps: 【57】【13822222222】【#】

Deleting SMS-Receiving Phones

Under the setting state, input the address code [57] ~ [59], and press the [#]

key to confirm. After the main device gives a long beep, the System will give a

voice prompt of “Successfully deleted” and the [signal] lamp flashes once,

indicating the phone number has been deleted.

Setting steps:

【

【【

【XX】

】】

】



【

【【

【#】

】】

】

XX: stands for the address codes of the 1~3 group of SMS

-receiving

phone (

[57]

~ [59]

). Example: delete the first group of SMS phone from the main device.

Setting steps: 【57】【#】

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

15 16

■

■■

■

Arm/Disarm for SMS notification

In setup state, use keypad to input [77],then choose command key [0/1]not

send/need send,press#,that means whether to sen SMS to user when Arm or

Disarm,the host make a long beep and voice "setting completed",finally press *#

exit.

Setting steps:8888[77] [1] [#]Arm/Disarm send the SMS to user.

8888[77] [0] [#] Arm/Disarm doesn’t send the SMS to user.

■

■■

■

Turn off/on keypad digital voice

Under the setting state, input the address code [78], select the [0/1] key to turn off

/ on the keypad digital voice, press * # exit.

Operating method:8888[78] [0] [#]Turn off keypad digital voice

8888[78] [1] [#]Turn on keypad digital voice

Zone Programming

By the Zone Programming, you can change the attributes of the zone alarm,

such as turning off the warning siren, etc. Under the setting state, input the

address code [60], enter the serial number of the zones [01~99], press the zone

type [1~4], and press the zone location [1~8], and select [0/1] to turn on/off the

warning siren, and then press the [#] key to confirm. After the main device gives a

long beep, the System will give a voice prompt of “Successfully set”.

Setting steps:

【60】【AA】【B】【C】【D】【#】

AA: stands for the serial number of the corresponding zone

[01~99].

B: stands for the zone type, including [1] Real Time,［

［［

［2］

］］

］40s-Delay,［

［［

［3］

］］

］24h,

［

［［

［4］

］］

］Bypass.

stands for the installation location, including ［1］Help Alarm, ［2］Fire

Alarm,［3］Gas Leak Alarm,［4］Door Lock Alarm,［5］Living Room Alarm,

［6］WindowAlarm, ［7］Balcony Alarm, ［8］Perimeter

Alarm.

stands for the alarm type, including［

［［

［0］

］］

］Alarm without warning siren, ［

［［

［1］

］］

］

Alarm with warning siren.

Example: set the alarm type for the Zone 12 as 24h, Fire Alarm, and

Alarm

with Warning Siren.

Setting steps:

【

【【

【60】

】】

】



【

【【

【12】

】】

】



【

【【

【3】

】】

】



【

【【

【2】

】】

】



【

【【

【1】

】】

】



【

【【

【#】

】】

】

Home Arming Setting

By the Home Arming Setting function, you can set the working status for

detectors separately. Just conduct some settings for the home arming zones.

Under the setting state, input the address code [61], select the serial number

of the corresponding zone [01~99], and select the [0/1] key to turn on/off the

alarm, and then press the [#] key to confirm. After the main device gives a long

beep, the System will give a voice prompt of “Successfully set”.

Setting steps:

【

【【

【61】

】】

】



【

【【

【XX】

】】

】



【

【【

【A】

】】

】



【

【【

【#】

】】

】

XX: stands for the serial number of the corresponding zone

[01~99].

A: stands for the alarm status, including [0] Home Arming without Alarm,

[1] Home Arming with Alarm.

Example: set the Zone 11 as Home Arming with Alarm.

Setting steps:

【

【【

【61】

】】

】



【

【【

【11】

】】

】



【

【【

【1】

】】

】



【

【【

【#】

】】

】

Example: set the Zone 12 as Home Arming without Alarm.

Setting steps:

【

【【

【61】

】】

】



【

【【

【12】

】】

】



【

【【

【0】

】】

】



【

【【

【#】

】】

】

Manual Recording

Under the setting state, input the address code [701], and press the [#] key to

confirm. After the main device makes a sound of “Beep”, the [signal] lamp

flashes once, the System starts to count down from 10s, and the recording starts:

please keep close to the main device (within 30 cm) and say your message; after

10s, the main device gives a sound of “Beep”, and the recording ends.

Setting steps: 【701】【#】

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

17 18

SOS Siren on Remote Controller

Under the setting state, input the address code [76] by the keypad of the main

device, select the [0/1] key to turn off/on the external siren for SOS alarm, and

press the [#] key to confirm. After the speaker gives a long beep, the System will

give a voice prompt of “Successfully set”. By default, the siren is off when

sending SOS alarm from the remote controller.

Warning Tone forArming Operation

Under the setting state, input the address code [75], select the [0/1] key to

turn off/on the external siren when conducting the operations of arming/disarming,

and press the [#] key to confirm. After the main device gives a long beep, the

System will give a voice prompt of “Successfully set”. If you turn on the warning

tone, the main device will sound once on arming, and twice on disarming. It is

convenient for users to make sure if the arming/disarming setting is successful

when using the remote control.

Enabling Landline Phone

Under the setting state, input the address code [71], select the [0/1] key to

turn off/on the landline phone alarm on the main device, and press the [#] key to

confirm. After the speaker gives a long beep, the System will give a voice prompt

of “Successfully set”. By default, only GSM Alarm is enabled. If you turn on the

Landline Phone Alarm, the main device will make an alarm by both ways,

offering higher grade of security.

Ringtone Times for Landline PhoneAlarm

Under the setting state, input the address code [72], press a key within [1-9]

to select the ringtone times, and press the [#] key to confirm. This setting is only

used for the landline phones.

Wireless Signal Output from the Main Device

Under the setting state, input the address code [41], select the [0/1] key to

turn off/on the wireless signal output from the main device, and press the [#] key

to confirm. After the speaker gives a long beep, the System will give a voice

prompt of “Successfully set”. If you turn on this option, the main device will send

out different wireless signals according to the following conditions (You need to

customize the hardware before setting this function).

1: Alarming

2: Disarming

3: Pressing the below key combinations on the keypad of the main device:

0*，0#；1*，1#；2*，2#；3*，3#；4*，4#；5*，5#；6*，6#；7*，7#；

8*，8#.

4: If you want to get wireless signal output from the main device when

conducting operations like SMS Control, Remote Control, you need to

customize the software.

5: The wireless signal is set to 315MHz /4.7MΩby default. If you want to

use other frequency or speed rate, you need to customize it.

Networking Center Settings (networking functions customized)

1:Arming/Disarming Report Center

Under the setting state, input the address code [74] by the keypad of the

main device, select the [0/1] key to turn off/on Arming/Disarming Report

Center, and press the [#] key to confirm. After the speaker gives a long beep,

the System will give a voice prompt of “Successfully set”. This function is

set to OFF by default.

2:Alarm Report Center

Under the setting state, input the address code [73] by the keypad of the

GSM SECURITY ALARM SYSTEM GSM SECURITY ALARM SYSTEM

19 20

main device, select the [0/1] key to turn off/on Alarm Report Center, and

press the [#] key to confirm. After the speaker gives a long beep, the

System will give a voice prompt of “Successfully set”. This function is set

to OFF by default.

3: User Code

Under the setting state, input the address code [74] by the keypad of the

main device, and input a 4 digit user code [XXXX], and press the [#] key to

confirm. After the speaker gives a long beep, the System will give a voice

prompt of “Successfully set”.

4: Networking Center Phone Number

Under the setting state, input the address code [50] by the keypad of the

main device, and input a phone number

[

XX…XX

]

with 22 digits at most,

and then press the [#] key to confirm. After the speaker gives a long beep,

the System will give a voice prompt of “Successfully set”.

Main Device Status

The main device has four statuses in the normal conditions:

Arming Status: The zones (1~99) can give alarms.

Home Arming: Only the zones set as [Home Arming] are effective and

can give alarms.

Disarming Status: The zones (1~99) cannot give any alarm (24h zones

not included).

Setting Status: All zones don't give any alarm when the main device is in

setting status.

Power-failure Status: If the System is on the arming status, it will send

out a short message upon power failure, and the LCD screen displays in

the low battery mode.

Daily Operations

Users can use the remote controller to conduct operations (such as Away

Arming, Home Arming, Emergency Alarm, or Real Time Disarming, etc.)

to the main device from outdoors or over a long distance.



AwayArming: press the

[

] key to enter the AwayArming status.



Disarming: press the [ ] key to enter the Disarming status.



Home Arming: press the [ ] key to enter the Home Arming status.



Emergency Alarm: press the [ ] key to trigger the main device

immediately and give an emergency alarm.

Away Arming

When you’re away, it’s necessary to use the Away Arming function.

Under this status, all detectors are activated to arming. If any source like an

invader, fire, gas leak etc. triggers the detectors, the System will give an

alarm at once.

Setting steps: press the [ ] key on the keypad of the main device, the

main device will make a sound of “Beep” once per second. After the

specific time, the ARM indicator lamp will stay on. Now this function is

successfully activated.

Home Arming

When you’re at home, some detectors need to be activated, such as

doors, windows, balconies, perimeters etc. But there’s no need to keep other

detectors activated (e.g. you may trigger the detector in the living room).

Thus it is suitable to enable the Home Arming function.

Setting steps: press the [ ] key on the keypad of the main device, and

Inhaltsverzeichnis

Andere DyGSM Sicherheitssystem Handbücher

DyGSM

DyGSM G66A Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung