Dynamix DC-E112 Bedienungsanleitung

DYNAMIX DC - E112

HomePNA Switch

USER’S MANUAL

HomePNA Switch Installation and Setup Manual

FOREWORD 3

1. INTRODUCTION 4

2. HOMEPNA SWITCH TECHNICAL SPECIFICATIONS 5

3. HARDWARE DESCRIPTION & PACKAGE CONTENTS 6

4. EQUIPMENT MOUNTING SETUP 7

4.1 RACK MOUNT 7

4.2 SIMPLE STACK UP 7

4.3 STACK MOUNTING 7

4.4 CABLE SELECTION 7

5. LED INDICATORS 8

6. HOMEPNASWITCHCONNECTION 9

7. HOMEPNA SWITCH AND HOMEPNA MANAGEMENT SWITCH CONNECTION 10

8. DEPLOYMENT DIAGRAM 12

9. USER INTERFACES 13

9.1 THE CONSOLE PORT SETUP 13

10. ICD COMMAND INDEX 14

11. SETTING VLAN FUNCTIONALITY 15

12. AUTO NOISE LEVEL FEATURE 17

13. AUTO RESET 18

14. HIGH/LOW POWER MODE 18

15. FREQUENTLY ASKED QUESTIONS (FAQ) 19

15.1 HOMEPNA 19

15.2 SWITCH 19

15.3 LAN 21

15.4 WAN 22

15.5 PBX 22

HomePNA Switch Installation and Setup Manual

16. TROUBLESHOOTING 23

17. APPENDIX 25

17.1 HOMEPNA SWITCH FACTORY DEFAULTS 25

17.2 COMPLETE ICD COMMAND INDEX 25

17.3 DB-9 TO PS/2 CABLE DIAGRAM 26

HomePNA Switch Installation and Setup Manual

FOREWORD

This guide has been constructed in a simple to follow and navigate style,

meant for VAR, SI, and reseller installation situations. This guide is also

available in Traditional Chinese, Simplified Chinese and Japanese.

Keep this guide in a safe place; it contains useful commands required for

the setup of the switches core functions in the event of a power loss or other

interruption.

Information printed within this guide is subject to change at any time

without notice. All specifications and parameters, including commands are

subject to change without notice.

Some information in this guide is acquired from the World Wide Web.

HomePNA Switch Installation and Setup Manual

1. INTRODUCTION

Thank you for choosing the HomePNA Switch for your MDU Solution. We

have been on the forefront of HomePNA technology since its inception, and

will always strive to create quality, cost-effective solutions for HomePNA

installers and users.

By choosing the HomePNA Switch, you have enabled your network to have

the ultimate in flexibility. The HomePNA Switch has plenty of Ethernet ports, to

offer you many paths for upgrading your network, as well as 12 VLAN

HomePNA ports ready to plug in to your existing wiring system using current

Cat.3/RJ-11 installations.

Some highlights of the HomePNA Switch included:

 Supports security with port based VLAN function.

 Supports Virtual LAN (VLAN) Grouping.

 Auto Noise Leveling (Automatic & Manual).

 Twelve 1Mbps HomePNA Ports

 Four 10/100 Mbps Base-Tx Ethernet Ports

 One Console Port for HomePNA Switch.

 Easy installation – no new wire required inside the building.

 Easy To Use Menu System and Command Interface.

 HomePNA and Ethernet ports status Monitoring.

 Frequency division multiplexing for uninterrupted simultaneous

voice/data transmission.

 Layer 2 Switching.

 Supports Full and half duplex modes.

 Store-and-Forward mechanism.

 HomePNA port transmission speed up to 1Mbps

 Back pressure and IEEE 802.3X compliant flow control.

 Supports 8K MAC addresses entries.

 Standard 19” Rack-mountable.

 Less distance restriction (500 ft or 160 m) than regular Ethernet (100 m).

HomePNA Switch Installation and Setup Manual

2. HOMEPNA SWITCH TECHNICAL SPECIFICATIONS

 Twelve (12) HomePNA Ports

 HomePNA Specs 1.1

 1Mbps Speed

 Transmit Distance: 500 ft Full Throughput, 1000 ft Factory Tested

 LED: Link, Activity, Collision

 RJ-11 Port Type for use with Twisted Pair Cable

 Four (4) Ethernet Ports

 10/100 Base-Tx, Auto-Negotiation

 IEEE 802.3, 802.3u

 LED: Link/Activity, 10/100, Full Duplex/Collision

 One (1) Console Port

 Baud Rate: 19200Bps, 8 Data Bits, 1 Stop Bit, No Parity, No Flow

Control

 Console Management Command (Local Mode)

 Manageable by HomePNA Management Switch (Remote Mode)

 Physical Specifications:

 AC Input: 100 - 250 VAC, 47 - 63 Hz, Internal Universal Power Supply

 Power Consumption: 12W Max

 Operating Temp: 0 - 50°C

 Storage Temp: -25 - 70°C

 Humidity: 10% - 90% Non-Condensing

 Certification: FCC Part 15/68, CE, VCCI, JATE Safety Compliance &

Emissions

 Weight (Net): 3.04 kg

 Dimensions: 443.6 mm × 222 mm × 44 mm

 Other Features

 1 MB Buffer Memory

 Broadcast Storm Control

 Support Back Pressure and 802.3x Flow Control

 Support 8K MAC Addresses Entries

 Frequency Division Multiplexing for Simultaneous Voice/Data

 Standard 19” Rack-mountable

HomePNA Switch Installation and Setup Manual

3. HARDWARE DESCRIPTION & PACKAGE CONTENTS

Upon opening your package you should have the following items:

 (1) Power Cord w/Ground

 (1) HomePNA Switch

 (1) Installation and Setup Manual

 (4) Mounting Feet (Shelf Install)

 (2) Mounting Brackets (Rack Install)

 (4) Mounting Diamonds (Stack Install)

 (8) Screws For Shelf or Rack Install

 (1) Cat.5 Patch For Switch To Switch Connection (1.80m)

If any of these items are missing, please contact your vendor immediately

before continuing. For additional manuals or mounting feet please contact your

vendor.

Before removing the switch from the package please make sure to

remove all static devices and static electricity from your body by touching an

available metal plate or grounding point.

Your new HomePNA Switch has 12 HomePNA RJ-11 Ports, 4 Ethernet

Ports, 1 Console Module.

HomePNA Switch Installation and Setup Manual

EQUIPMENT MOUNTING SETUP

4.1 RACK MOUNT

EIA23

The HomePNA Switch is supplied with mounting ears for easy

installation into a Standard 19” rack configuration cabinet. Simply use the

supplied ears and screws to mount it to your current rack.

1. Use the included screws to secure ears into the sides of the

HomePNA Switch in the provided pre-drilled holes.

2. Align the unit into a single 19” rack space and secure using

standard rack mount screws, the use of a nut is optional.

4.2 SIMPLE STACK UP

When mounting the HomePNA Switch on a shelf, be sure to install the

included rubber feet onto the bottom of the unit to prevent scratching of the

mounting surface, as well as to allow clearance between the switch and

surface for better airflow. Once feet are installed onto the switch unit, allow for

a clearance of at least 5 inches from rear to wall, and 1 to 2 inches on each

side, for adequate airflow.

4.3 STACK MOUNTING

EIA23

Use the diamond shaped stackable mounts to attach to units together

from the sides. Simply apply the diamonds to each side using the included

screws to the upper holes on the bottom device, and the lower holes on the top

device.

4.4 CABLE SELECTION

Selecting the correct cable type(s) and length(s) will assist you to make

a clean and error free installation. For Ethernet uplinks and connections use

Cat.5 or higher certified cables, to minimize cross talk and noise in the cable.

For easier connection and safer operation use booted RJ-45 connections as

well. For HomePNA ports, use of shielded Cat.5 is highly recommended, but is

not a must. Refrain from using excess cable when installing to further reduce

line noise and cross talk.

HomePNA Switch Installation and Setup Manual

5. LED INDICATORS

EI A 232

HomePNA Switch

Module

LEDs Function Color Status Description

SNMP SNMP Mode Green -- Reserved

On Auto Noise Level function is

XTLK Auto noise level

status Green

Off Auto Noise Level function is

off

On VLAN and VLAN Grouping is

VLAN Virtual LAN status Green

Off VLAN and VLAN Grouping is

off

Alarm -- -- -- Reserved

ID 0,1,2,3 -- -- -- Reserved

LEDs Function Color Status Description

On Power on

Power Power Indication Green Off Power off

Ethernet Port

On The Ethernet port is linked

Blinking The Ethernet port is sending

or receiving data

LNK/ACT Ethernet Port

Active Green

Off Port is not connected

On The speed is at 100Mbps

10/100

Ethernet port

Transmit And

Receive Speed

Green

Off The speed is at 10Mbps

On Port is operating at full

duplex

Blinking Transmission collisions have

occurred on the Ethernet port

FDX/COL

Full Duplex

Transmission And

Collision Indicator

Yellow

Off Port is operating at half-

duplex

HomePNA Port

On The HomePNA port is linked

LINK Link Indication Green

Off The HomePNA port is not

linked

On The HomePNA port is

sending and receiving data

Blinking The HomePNA port is linked

but not active

ACT Activity Indication Green

Off The HomePNA port is not

linked

COL Collision Indication Yellow Blinking

Transmission Collision has

occurred on the HomePNA

port

HomePNA Switch Installation and Setup Manual

6. HOMEPNA SWITCH CONNECTION

The following illustrates the HomePNA Switch and of its ports.

EIA 232

HomePNA Switch

Wide Area

Network

Cat5

Server

Cat.5

Terminal Terminal Terminal Terminal Terminal Terminal

Figure 1

Inhaltsverzeichnis

Andere Dynamix Schalten Handbücher

Dynamix

Dynamix DYNAMIX DH-114 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung