Dynamix DW-Phone/H Bedienungsanleitung

DYNAMIX DW-Phone/H

User’s Manual

Chapter 1 Introduction ...................................................................................................................... 3

Product Description..................................................................................................................... 4

1.Features and Specification ............................................................................................... 4

2.Appearance......................................................................................................................... 6

Chapter 2 Operating Procedure – LCD Display Configuration .................................................. 9

1.Initialize IP PHONE ................................................................................................................ 9

2.LCD Configuration ................................................................................................................. 11

Chapter 3 Advanced Configurations via Telnet........................................................................... 17

1. [help] command..................................................................................................................... 17

2. [quit] command...................................................................................................................... 18

3. [reboot] command................................................................................................................. 18

4. [flash] command.................................................................................................................... 18

5. [commit] command ............................................................................................................... 18

6. [ifaddr] command .................................................................................................................. 19

7. [time] command..................................................................................................................... 20

8. [ping] command..................................................................................................................... 20

9. [pbook] command ................................................................................................................. 21

10.[ddns] command .................................................................................................................. 22

11.[pppoe] command ................................................................................................................ 23

12.[sysconf] command.............................................................................................................. 24

13. [h323] command ................................................................................................................. 25

14. [voice] command................................................................................................................. 27

14. [rbtone] command............................................................................................................... 28

15. [tos] command..................................................................................................................... 29

16. [tone] command .................................................................................................................. 30

17. [support] command............................................................................................................. 31

18. [bureau] command.............................................................................................................. 32

19.[rom] command .................................................................................................................... 32

20.[passwd] command.............................................................................................................. 33

Chapter 4 Web Configuration ..................................................................................................... 35

Step 1. Browse the IP Address predefined via Keypad or TELNET.................................. 36

Step 2. Input the login name and password.......................................................................... 36

Step 3. The web interface main screen ................................................................................. 37

Step 4. Start configure .............................................................................................................. 37

1.Network Configure ........................................................................................................... 38

2. H323 Configure ............................................................................................................... 40

3. System Configure ........................................................................................................... 42

4. PPPoE Configure............................................................................................................ 43

Chapter 5 Upgrade the IP PHONE ............................................................................................. 55

Download Procedure ............................................................................................................. 55

1.LCD Panel Control........................................................................................................... 55

2.Remote Control: Telnet ................................................................................................... 55

3.Web Management............................................................................................................ 57

Chapter 1 Introduction

The IP PHONE is a full-featured IP-based telephone system, which provides VoIP service

on LAN or any IP based environment. By using IP environment for voice communication,

company or individual can save lots of expenses and make data and voice network

converged.

IP PHONE also supports PSTN analog line connection. Therefore, it can perform as the

same as traditional POTS (Plain Old Telephone Service).

Product Description

1.Features and Specification

Basic Features:

 ITU-T H.323 v3 compliance

 DTMF detection/generation

 TFTP/FTP software download

 Remote configuration/reset via Telnet

 LED indication for system statusSpeaker, Hold ,Mute , Message , PSTN

 Network Interface :

- Switch Hub inside, providing 2 RJ-45 sockets for 10/100Base-T connection

- 1 RJ-11 socket for PSTN connection

 Microsoft Net Meeting v3.0 compatible

 SNTP (Simple Network Time Protocol)

 Call HOLD/TRANSFER/FORWARD/MUTE

 PSTN/IP side access switch

 10 Direct Line Button for speed dial

 Speaker Mode

 System Configuration from keypads and displayed on LCD

 Ring Tone selection

 Password setting for security

 Function Keys : Speaker , Redial , Mute , Hold , Transfer , Forward , Message , PSTN

 Ten sets last Phone Number redial

 Dial plan

 Provide TOS(Type Of Service) function

 GateKeeper mode or Peer to Peer mode selection

Caller ID:

 IP side display H323-ID and E.164.

 Display the count of total call received.

 Display un-answered call name, number.

 Show caller’s name, number, calling time.

Volume Adjustment:

 Speaker volume level adjustable.

 Handset Receiver volume level adjustable.

LCD:

 2 lines, 24 character Dot Matrix display.

 Indicator messages of HOLD, MUTE, PSTN, Directed Line 1~10.

 Display current date and time.

 Display of call duration.

Audio features:

 Codec -- G.711 a/µlaw, G.723.1 (6.3Kbps),G.729, G.729a

 VAD (Voice Activity Detection), CNG (Comfort Noise Generate)

 G.168/165-compliant adaptive echo cancellation

 Dynamic Jitter Buffer

 Bad Frame Interpolation

 Provide H.245 Out-band DTMF message

 Call Transfer (H.450.2)

 Call Forward (H.450.3)

 Call Hold (H.450.4)

 Gain (Voice Volume) Settings

 Provide Call Progress Tone: Dial tone, busy tone, call-holding tone and ring-back tone

Firmware Upgrade:

 Firmware version displayed on LCD.

 Two ways to upgrade firmware:

- Download by KEYPAD configuration.

- Download by Telnet.

Management Features:

 Two easy ways for system configuration

- TELNET

- IP PHONE KEYPAD (can only upgrade application rom file)

- Web Browser

2.Appearance

1.Front View and Keypad function

C: Cancel and Clear♦

♦

 : Move to left /previous and right/next .

OK: Press OK to confirm the modification.

Direct Line (DL) Button 1 – 10: User press DL button to do speed dial according to

phone book data 1-10 (please refer to LCD configuration-Phone Address Book or

Advanced Configurations via Telnet-[pbook] command ).

Number 1 –10, * and #: The function is as the same as the general phone set.

Corresponding list of keypad and symbol:

1 “Space” ; “,” ; “.” ; “!” ; “1”

2 “A” ; “ B” ; “C” ; “2”

3 “D” ; “E” ; “F” ; “3”

4 “G” ; “H” ; “I” ; “4”

5 “J” ; “K” ; “L” ; “5”

6 “M” ; “N” ; “O” ; “6”

7 “P” ; “Q” ; “R” ; “S” ; “7”

8 “T” ; “U” ; “V” ; “8”

9 “W” ; “X” ; “Y” ; “Z” ; “9”

* “-“ ; “?” ; “*”

0 “0”

# “_” ; “@” ; “#”

MUTE: Mute the voice of MIC and let others can’t hear from user in communication.♦

♦ PSTN: Press PSTN to switch IP PHONE as PSTN or IP Phone Mode. In PSTN mode,

“PSTN” characters will be displayed on LCD left bottom side, then users can dial out as

if standard telephone set in PSTN ; in IP Phone mode , “GK” characters will be

displayed on LCD left bottom side.

Note:1. When IP PHONE is in PSTN mode, only PSTN and SPEAKER function key can

work.

2. On LCD will display ”…Incoming Call... ” to notice user when IP PHONE has both

IP and PSTN side incoming calls.

3. If in communication with IP side, user can press HOLD to hold IP side, then press

PSTN to pick up PSTN side, after that can press HOLD again to retrieve IP side.

4. If in communication with PSTN side, user must hang up PSTN side before pick up

IP side.

HOLD: To hold a call with H.450 function.♦

♦

SPEED: Press SPEED and number (Phone book index) to do speed dial according to

phone book data (please refer to LCD configuration-Phone Address Book or Advanced

Configurations via Telnet-[pbook] command ).

FORWARD: Forward a incoming call to another IP device by H.450 forward

function.(please refer to LCD configuration-Indicate Forward Type)

MESSAGE and its indicated LED light: When missing the incoming calls, the

message LED will be flashing. User can know the information of miss call by pressing

the message button.

TRANSFER:

1. Transfer a call by H.450 transfer function. Press TRANSFER button in

communication and press phone No. which user want to transferred to can transfer

this call .

2. Change characters to be capital or lowercase: when press TRANSFER before press

letters can switch type of letters.

REDIAL: Redial the last outgoing call.

+ and - : Adjust the voice volume in communication.

SPEAKER: Speaking without picking up handset.

Note: All function keys mentioned above (except Number 1 –10, * and # ) are effective

only in IP Phone mode.

2.Back View

DC 9V: DC 9V power input outlet♦

♦

LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5 cable.

PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable

Line: RJ-11 connector, connected directly to the PSTN analog line.

Note: There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port.

When network status is in normal, LED of LINK/ACT will be flashing; when transmit rate is in

10 mbps/100mbps, LED of 10/100 will light off/on .

3.Specification of connector

Ethernet Port

Ethernet port is for connecting IP PHONE to network, transmit rate supports 10/100

Base-T.

Ethernet connector LAN

1 RJ11connector

RJ11 connector is for connecting IP PHONE with PSTN.

RJ11connector

Chapter 2 Operating Procedure – LCD Display

Configuration

1.Initialize IP PHONE

1. When power on the IP PHONE, the LCD screen shows as below.

IP-Phone

Board Start Booting

2. Wait around one minute until the IP PHONE finishes boot program initialization.

3. User can see flashing greeting as below:

System Initializing…………..

4. Then IP PHONE get into standby mode:

IP-Phone

GK 10:10:10AM

The main LCD screen would be shown as similar as above. The GK word means the IP

Inhaltsverzeichnis

Andere Dynamix Telefon Handbücher

Dynamix

Dynamix DW-Phone S Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung