Dynascan DK651DR5 Bedienungsanleitung
USER MANUAL
DK651DR5
67201 | V2.04
0
Contents
Material Contents Declaration................................................................................................................1
Recycling and Energy Information .........................................................................................................1
Declaration of Conformity.......................................................................................................................2
Safety Precautions .................................................................................................................................3
Important Safety Information..................................................................................................................4
Getting Started ....................................................................................................................................... 5
Contents ............................................................................................................................................. 5
Installing and Replacing Remote Control Batteries............................................................................5
Installation............................................................................................................................................... 6
Connecting to a Power Source........................................................................................................... 9
Connecting an External Video Source .............................................................................................10
Input / Output Terminals...................................................................................................................11
Operating Instructions .......................................................................................................................... 11
Powering On/Off the Display............................................................................................................12
Using the Remote Control................................................................................................................13
Navigating the On Screen Display (OSD) Menu ..................................................................................15
Specifications ....................................................................................................................................... 21
Input Mode............................................................................................................................................22
Pin Assignments...................................................................................................................................23
RS-232 Input ....................................................................................................................................23
Troubleshooting....................................................................................................................................24
About DSM365 ..................................................................................................................................... 25
DK651DR5 User Manual 1
Material Contents Declaration
Part Name
Hazardous Substances
Lead
Mercury
Cadmium
Hexavalent
Chromium
Polybrominated
Biphenyls
Polybromodiphenyl
Ethers
Pb
Hg
Cd
Cr6+
PBB
PBDE
PCBA
O
O
O
O
O
O
CHASSIS
O
O
O
O
O
O
ACCESSORY
O
O
O
O
O
O
PACKAGE
O
O
O
O
O
O
“O” indicates that the level of the specified chemical substance is less than the threshold level
specified in the standards of SJ/T-11363-2006 and EU 2011/65/EC.
“” indicates that the level of the specified chemical substance exceeds the threshold level specified
in the standards of SJ/T-11363-2006 and EU 2011/65/EC.
Recycling and Energy Information
DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our
products’ impact on the environment is of the utmost importance. We are dedicated to meet the
latest environmental protection regulations.
Energy usage
Mode
Energy Consumption
Power On Mode
Typ. 1000W / Max. 1600W
Standby
< 50W
Disposal
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available. If electrical
appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater
and get into the food chain, damaging your health and well-being. When replacing old appliances
with new one, the retailer is legally obligated to take back your old appliances for disposal at least for
free of charge.
DK651DR5 User Manual 2
Declaration of Conformity
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the
user's authority to operate the equipment.
Manufacturer Name
DynaScan Technology Corp.
Manufacturer Address
6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan
This device complies with Directive 2014/53/EU issued by the Commission of the European
Community.
Article (a)
Article (b)
DK651DR5 User Manual 3
Safety Precautions
CAUTION
Do not install the display in a wet environment or place anything filled with liquid
such as a vase or beverage on top of it.
Do not install the display near flammable objects such as gasoline or other
volatile liquids.
Do not install the display near any heat sources such as radiators or other
heating devices.
Do not install the display in the dusty environment.
Do not damage the power cord or plug.
Do not disassemble the screen to avoid electric shock.
The product can normally be operated at an altitude under 2000m. Abnormalities
may occur when installing the device at an altitude above 2000m.
Please affix the stand to the ground steadily before mounting the display onto the
stand.
WARNING
Please power off the LCD and the video source before plugging in the DVI, DP or
HDMI cable.
Please installed the display in well-ventilated place, do not install in a confined
space.
Suitable for mounting on concrete or other non-combustible surface only.
If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to
touch, immediately unplug the display and contact the dealer.
Clean only with soft, dry cloth but not use chemical liquids, and unplug while
cleaning.
Do not use extreme force or any sharp or pointed objects to touch the display.
Do not drop or allow any object to fall to the display.
Do not operate the display with wet hands to avoid electric shock.
Do not discard this product with general household waste. Please be sure to
comply with the local waste regulations.
This device uses, generates and radiated radio frequency energy. The radio
frequency energy produced by this device is well below the maximum exposure
allows by Federal Communications Commission (FCC).
When a stationary or fixed image is displayed on the screen for a long time, the
image may be permanently imprinted on the screen. This phenomenon is
known as image burn-in and is not covered by the manufacturer's warranty.
In order to avoid burn-in, avoid prolonged display of static or fixed images on the
screen.
Power supply cord must not be attached to the building surface, nor run through
walls, ceilings, floors and similar openings in the building structure.
Power cord shall be connected to a socket-outlet with earthing connection.
DK651DR5 User Manual 4
Important Safety Information
Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric
shock or other hazards. Please contact DynaScan certified service professionals for all
maintenance requirements.
Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources.
Do not place heavy objects on the power cord. A damaged power cord might cause electric
shock or fire.
Do not bend, twist, or damage the power cord.
The power cord must comply with the local safety regulations.
Do not damage or modify the prongs/pins and the ground contact on the power cord plug.
Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over
and cause substantial damage.
Do not cover the vents and/or the heat sink.
Do not install the LCD beside radiators or other heat sources. The installation site should have
sufficient ventilation so the heat generated by the LCD can be dissipated.
Do not use the Signage in a hot, humid, dusty, or fumy environment.
Handle the LCD with care. Save the packaging materials for transport later.
Clean the LCD backside at least once a month for dust and other particles.
Unplug the LCD immediately and contact a DynaScan certified service professional as soon as
possible when any of the following situations occurs:
Damaged power cord or power plug.
If liquid or foreign object has entered the LCD.
If the LCD has been exposed to rain or water.
If the LCD has been dropped or the casing has become damaged.
If any structural damage such as cracks or unnatural vibration is found.
If the LCD cannot be operated following the steps outlined in this manual.
If the LCD emits smoke or other odors, or generates strange noises.
Operating Suggestions
Avoid displaying a stationary image for a long period of time in order to prevent image sticking.
Cleaning the Panel
Use a soft, lint-free cloth to gently wipe the dust off from the screen panel.
Do not use any hard material to wipe the panel.
Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert
excessive pressure on the panel to prevent any damage.
Do not use any cleaning solutions on the panel as it might cause discoloration.
Cleaning the Casing
Unplug the power cord.
Gently wipe the casing with a soft cloth.
Attention
Do not use any of the following solutions to clean the casing as they may damage the paint and
cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution,
glass cleaner, wax, polisher, or detergent.
DK651DR5 User Manual 5
Getting Started
Contents
Confirm that the accessories below are shipped along with the display. If any item is missing, please
contact your dealer. The color and shape of the accessories may vary with the products.
DK651DR5 Professional LCD.
Remote Control x 1 pc.
Batteries (1.5V / AAA) x2 pcs.
Installing and Replacing Remote Control Batteries
1. Open the battery compartment cover.
2. Insert 2 new AAA batteries.
3. Close the battery compartment cover.
Warning:
Incorrect usage of batteries may cause leakage or explosion.
Pay attention to the polarity when installing the batteries.
Do not mix different types of batteries or new and used batteries. Doing so may shorten the
battery life or cause leakage.
Remove or replace the batteries when they are empty in order to prevent acid leaking in the
battery compartment.
Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so
may hurt human skin.
Note: If the remote control is not going to be used for a long time, we recommend removing the
batteries from the remote control.
DK651DR5 User Manual 6
Installation
Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the
damage caused by improper installation and DynaScan shall not be held responsible in such incident.
A
DK651DR5 User Manual 7
B
DK651DR5 User Manual 8
C
Inhaltsverzeichnis
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung