Dynojet PCIII USB Bedienungsanleitung

i511-411 www.powercommander.com 2005 Triumph Daytona 650 - PCIII USB - 1

2005 Triumph Daytona 650

Installation Instructions

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com

Parts List

1Power Commander

1USB Cable

1CD-ROM

1Installation Guide

1Power Adapter

2Power Commander Decals

2 Dynojet Decals

2 Velcro®Strip

1Alcohol Swab

1Dynojet O2 controller

You can also download the Power

Commander software and latest maps

from our web site at:

www.powercommander.com

The ignition must be turned off before installation.

After turning off the ignition make sure not to dis-

connect anything for at least one minute. If some-

thing is disconnected while the CDI is powering

down a check engine light may be indicated. Also

do not turn on the ignition while one of the electri-

cal connectors is unplugged. If a check engine

light is indicated the code can only be cleared by

a Triumph dealer.

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Button Adjustment Display

Faceplate Buttons

Expansion Port USB Port

1 Remove the seat.

2Remove the fuel tank

Note: The fuel tank does not need to be

removed to perform the install

but it will make it easier.

3Unplug the connector from the

throttle bodies to the wiring har-

ness (Fig. A).

4Plug the connectors from the

Power Commander in-line of the

stock connector (Fig. B).

5Route the Power Commander

wiring harness along the left

side of the frame (Fig C).

6Connect the ground wire from

the Power Commander to the

negative side of the battery

(Fig. C).

Fig. AFig. BFig. C

i511-411 www.powercommander.com 2005 Triumph Daytona 650 - PCIII USB - 2

Unplug this connector

PCIII connectors

Stock connector

Ground wire

PCIII harness

7Install the Power Commander in

the tail section. Make sure to

use the supplied alcohol swab to

clean the inner rear fender

before attaching the Power

Commander. Use the supplied

velcro to secure the unit to the

inner rear fender (Fig. D).

Fig. D

i511-411 www.powercommander.com 2005 Triumph Daytona 650 - PCIII USB - 3

8Unplug the stock O2 sensor

from the wiring harness. This

connector is located underneath

the fuel tank next to the regula-

tor/rectifier (Fig. E).

9Plug the Dynojet O2 controller

into the stock wiring harness.

Fig. E

10 Install the O2 controller to the

right side of the inner rear fend-

er (Fig. F) using the supplied

velcro.

11 Reinstall fuel tank and seats.

Fig. F

Unplug harness

O2 controller

Inhaltsverzeichnis

Andere Dynojet Steuereinheit Handbücher

Dynojet

Dynojet Power Commander III USB EX Bedienungsanleitung

Dynojet

Dynojet PCV I25-028 Fehlerbehebungshandbuch

Dynojet

Dynojet Power Commander III Bedienungsanleitung

Dynojet

Dynojet Power Commander 3 Bedienungsanleitung

Dynojet

Dynojet Power Commander III USB EX Bedienungsanleitung

Dynojet

Dynojet Power Commander III USB EX Bedienungsanleitung

Dynojet

Dynojet PCV F/I Bedienungsanleitung

Dynojet

Dynojet Power Commander III USB EX Bedienungsanleitung

Dynojet

Dynojet PCV F Handbuch

Dynojet

Dynojet Power Commander III USB Bedienungsanleitung

Dynojet

Dynojet Power Commander III USB Bedienungsanleitung

Dynojet

Dynojet Power Commander III USB EX Bedienungsanleitung

Dynojet

Dynojet Power Commander FC Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung