E-Image GH01 Bedienungsanleitung
User s Manual
PREFACE FLUID HEAD
Thank you for purchasing E-IMAGE professional heads and
tripods. This manual is an important tool for personnel who
operate and maintain this equipment. Inside, you will
find detailed information about E-IMAGE tripods and
heads, and their proper use. We highly recommend you read
the manual carefully and familiarize yourself with each
section. There is also a section about safety and
maintenance to help you keep your equipment in perfect
condition and extend its life.
Please keep this manual for reference while operating and
maintaining your equipment.
The E-IMAGE GENTING Series is an upgraded generation
of E-Image fluid heads with international
influences, innovative designs, and more advanced
functions. We refined the counterbalance and drag
systems, making balancing faster and simpler. This new
series can handle a wider payload range, from 8.8 to 55
pounds, and works with many different styles of camera. Pan
handles with rubber grips are included for precise camera
movements and are extendable in some models. Each
head also has an installed bubble level, and advanced
heads have an LED light installed for making
adjustments in the dark.
CONTENTS
Fluid Head Specifications.………………….......... 1
Parts(GH03)……………………………….................. 2
Set up & Use..............……………………….......... 3-5
1.
Installing the Pan Handle.……………...................... . 3
2.
Removing the Quick Release Plate…....................... 3
3.
Adjusting Tilt Position……………….......................... 4
4.
Adjusting Pan Position………………......................... 4
5.
Drag Adjustment for Pan and Tilt..…......................... 4
6.
Mounting the Camera…………................................. 5
7.
Extra functions of the GP1 Quick Release Plate…... 6
Parts(GH06-GH25) ………………………………......7
Set Up & Use(GH06-GH25）………………….. 8-12
1.
Installing the Pan Handle..………………................... 8
2.
Mounting to a Tripod.............………………............... 8
3.
Removing the Quick Release Plate………................ 8
4.
Mounting a Camcorder…….………........................... 9
5.
Mounting a Camera……...…………..................... 9-10
6.
Adjusting the Counterbalance Settings.................... 11
7.
Adjusting the Tilt Drag..……………………………….11
8.
Adjusting the Pan Drag.………………………………12
9.
Changing the Batteries (GH08/08L/10/10L )…..…...13
10.
Changing the Batteries (GH15,GH25)………..……14
CONTENTS
Tripod Specifications…………………………………………..15-16
Parts(AT7402A) ……………………………………………...........17
Use AT7402A ……………………………………………...........18-19
1. Releasing and Locking the Legs.....……………….......................18
2.
Adjusting Tripod Height…………..………………..........................18
3.
Anti-Slip Rubber Feet……………………………............................18
4. Folding the Tripod for Storage...………………............................ 19
Parts(GA/GC101) ……………………………………....................20
Parts(GA/GC102) ……………………………………................ ...21
Parts(GA/GC751 GA/GC752) ………………………............. . . 22
Use(GA/GC751 GA/GC752 GA/GC101 GA/GC102) ….23-24
1. Releasing and Locking the Legs....………………....................... 23
2.
Adjusting the Mid-Level Spreader..………………........................ 23
3. Adjusting the Ground Spreader…..........…………....................... 23
4.
Removing the Mid-Level Spreader.………………........................ 24
5.
Installing and Removing a Ground Spreader……………............. 24
6.
Folding the Tripod for Storage…………………............................ 24
Maintenance…………………………………………................. . . . 25
Notices & Warnings………………............................................ 26
Head No.
Fluid Head
E-IMAGE No.
G H
1 2
GH03 75mm 1kg 4kg +90°～-60°
-40℃～80℃
GH05 75mm 1.7kg 3-8kg +90°～-45°
-30℃～60℃
0-2
GH06 75mm 1.6kg 6kg +90°～-60°
-40℃～80℃
0-50-3
GH08 75mm 1.7kg 8kg +90°～-60°
-40℃～80℃
0-6
GH10 75mm 1.9kg 10kg +90°～-60°
-40℃～80℃
1-7
0-3
GH10L
100mm
2kg 10kg +90°～-60°
-40℃～80℃
1-7
0-3
100mm
3.7kg 15kg +80°～-75°
-40℃～80℃
0-90-5
GH15
100mm
+90°～-80°
-40℃～80℃
1-15
0-7
GH25 4kg 25kg
A
B
C
E
F
G
H
I
K
J
D
A
B
C
D
E
F
G
H
J
I
K
100mm
+90°～-60°
-30℃～60℃
GH20 3.8kg 20kg 0-8
SPECIFICATIONS
Model
No.
Bowl
size
Net
weight
Load
capacity
Grades of
drag
Counterbalance
Tilt range Temperature
range
Variable (Tilt) Fixed
Fixed
Fixed
Fixed
Bowl Locking Knob
PARTS(GH03)
Quick 5elease 3late
4XLFN5HOHDVH3ODWH/RFNLQJ.QRE
Quick Release Plate Release Button
Pan Handle Locking Thumb Screw
Pan Handle
Pan Handle Mounting Rosette
Tilt Locking Knob
Tilt Drag Adjustment Knob
GH0165mm 1.3kg 5kg Fixed Fixed +80°～-65°
-30℃~60℃
G
D
EF
loose
lock
C
B
loose
lock
loose
lock
J
lock
loose
H
ReduceIncrease
1.Install Pan Handle
Place the pan handle E in the desired position on the pan handle mounting
rosette F, then secure it by tightening pan handle locking thumb screw D.
2. Removing the Quick Release Plate
Loosen the quick release plate locking knob B, then press the quick release
plate release button C while sliding the plate A towards the back of the head.
5.Tilt Drag Adjustment
Increase tilt drag by turning the tilt drag adjustment knob H clockwise
(as if tightening a screw). Reduce the tilt drag by turning the knob H
counter-clockwise (as if loosening a screw).
C
3.Adjusting Tilt Position
Loosen the tilt locking knob G to change tilt position. Tighten the knob to
lock the tilt position.
4.Adjusting Pan Position
Loosen the pan locking knob J to change the pan position. Tighten the
knob to lock the pan position.
SET UP & USE (GH03)
3 4
8.Extra Functions of GH03, GH06 plate
The GH03 and GH06 fluid heads have a special clip that allows the GP1
quick release plate to be pressed down into place. Press one side of the
plate against the normal side of the quick release plate track, then press
the other side down against the spring clip until the clip clicks, and the
plate is secured in place.
Q
6. To mount a camera or camcorder, remove the quick release plate
from the tripod head. Attach the plate to the camera using the included
¼”-20 or 3/6”-16 screw. Take care not to over-tighten the screw.
7. With the pan and tilt locked on the head, slide the camera plate onto
the head, moving from the back to the front of the head, until the locking
button C clicks. Balance the camera by placing the camera’s center of
gravity as close to the center of the head as possible, then tighten quick
release plate lock B.
MOUNTING THE CAMERA EXTRA FUNCTIONS OF GH03,GH06 PLATE
5 6
A
B
C
D
E
K
T
S
Q
G
H
MJRL
I
F
N
A
MB
C
EG
loose
lock
loose
lock
F
loose lock
lock
loose
1. Installing Pan Handle
Place the pan handle A in the desired position on the rosette M and tighten the locking
thumb screw C, making sure the locking washer T is in place between the handle and
rosette. Loosen the length adjustment knob B on the pan handle to adjust the length of
the handle. Length adjustment is only available on GB2 and GB3 pan handles.
2. Installing the Fluid Head on a Tripod
Adjust the tripod to the desired height, and place the ball of the head into the bowl of
the tripod. Level the head using the bubble level R, and secure the bowl locking
knob F onto the bottom of the head on the underside of the tripod bowl.
3. Removing the Quick Release Plate
Loosen locking knob E and hold the release button G while sliding the plate toward
the rear of the head.
G
SET UP & USE(GH06-GH25)PARTS(GH06~GH25)
7 8
A Pan Handle
Pan Handle Length Adjustment Knob
Pan Handle Locking Thumb Screw
Quick Release Plate Camera Locking Screw
Quick Release Plate Locking Knob
Bowl Locking Knob
Quick Release Plate Release Button
Tilt Locking Knob
Counterbalance Adjustment Dial
Tilt Drag Adjustment Dial
Pan Locking Knob
Pan Drag Adjustment Dial
Pan Handle Mounting Rosette
Bubble Level LED Power Button
Quick Release Plate
Bubble Level
Rubber Washer
Pan Handle Locking Washer
B
C
D
E
F
G
H
I
J
K
L
M
N
Q
R
S
T
MOUTING THE CAMCORDER VIA ADAPTER
4.Mounting a Large Camera with the PS-C VCT-14 Adapter
4.1 Attach the quick release plate to the bottom of the VCT-14 mounting
adapter (part no. PS-C) using the ¼”-20 or 3/8”-16 screws included with
the head. Take care not to over-tighten the screws when mounting the
plate.
4.2 Slide the quick release plate onto the tripod head. The plate release
button will click when it is in place.
4.3 Make sure the head’s pan and tilt axis are locked, and attach the
camera’s VCT-14 wedge to the PS-C adapter. It will click when it is
locked in place. Loosen the quick release plate lock and adjust the
position of the camera to find the desired center of balance.
Q
5.2 Make sure the head’s pan and tilt axis are locked, then slide the
quick release plate onto the head, moving from the rear to the front. The
plate release button C will click when the plate is in place. Slide the plate
along the track until you find the center of balance, then lock the plate in
place with the locking knob E.
MOUNTING THE CAMERA
910
5.Mounting the Camera to the Quick Release Plate
5.1 Attach the quick release plate to the bottom of the camera using the
included ¼”-20 or 3/8”-16 screws. Take care not to over-tighten the
screw when mounting the camera.
L
lock loose
6.Adjusting Counterbalance Settings
Loosen the tilt locking knob H and hold the head steady with the pan
handle. Turn the counterbalance dial I to a setting that allows the camera
to remain in position without operator assistance. Lower numbers mean
less tension; higher numbers use more tension to balance loads.
I
lock loose
7. Adjusting Tilt Drag
Loosen the tilt locking knob H. Turn the tilt drag adjustment dial J to the
desired setting. Lower numbers give less resistance; higher numbers
offer more resistance.
J
lock loose
8. Adjusting Pan Drag
Loosen the pan locking knob K. Use the pan drag adjustment dial L to set
the desired amount of pan drag. Lower numbers give less drag; higher
numbers offer more resistance.
ADJUSTING COUNTERBALANCE & DRAG ADJUSTING PAN DRAG
11 12
Dieses Handbuch passt für folgende Modelle
9
Inhaltsverzeichnis
Andere E-Image Kamerazubehör Handbücher
