E-Seek M500 Bedienungsanleitung

M500 User Manual and Programmer SDK

Revision 1P

Doc No 560802-1A

May 19, 2017

M500 USER MANUAL AND PROGRAMMER SDK

Page 1

E-Seek reserve the right to make changes to any product to improve reliability, function or design.

E-Seek do not assume any product liability arising out of, or in connection with, the application or use of

the product, circuit or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or

patent, covering or relating to any combination, system, apparatus, machine, material method, or process

in which E-Seek products might be used. An implied license only exists for equipment, circuits and

subsystems contained in E-Seek products.

E-Seek and the E-Seek logo are registered trademarks of E-Seek Incorporated. Other product names

mentioned in this Reference Guide may be trademarks or registered trademarks of their respective

companies and are hereby acknowledged.

For the latest driver and manual visit: http://www.e-seek.com

E-SEEK Inc.

Website: www.e-seek.com

Patented Product

R & D Center Sales & Marketing

9471 Ridge haven Ct. #E 245 Fischer Ave #D5

San Diego, CA 92123 Costa Mesa, CA 92626

Tel: (858) 495-1900 Tel: (714) 545-3316

Fax: (858) 495-1901 Fax: (714) 545-3595

M500 USER MANUAL AND PROGRAMMER SDK

Page 2

TABLE OF CONTENTS

1. INTRODUCTION ............................................................................................................................................. 4

1.1 PRODUCT FEATURE............................................................................................................................................4

1.2 PREREQUISITE...................................................................................................................................................4

2. DEVICE DESCRIPTION..................................................................................................................................... 4

2.1 OVERVIEW OF MODEL M500 .............................................................................................................................5

2.2 PRODUCT SPECIFICATION....................................................................................................................................6

2.3 TECHNICAL DETAILS...........................................................................................................................................6

2.4 UNPACKING DEVICE...........................................................................................................................................7

2.4.1 USB Cable.................................................................................................................................................7

2.4.2 White balance calibration card................................................................................................................8

2.4.3 Cleaning Card...........................................................................................................................................8

3. GETTING STARTED ......................................................................................................................................... 9

3.1 UPGRADING FIRMWARE ...................................................................................................................................10

3.1.1 Upgrade firmware from Demo application............................................................................................10

3.1.2 Upgrade by restarting the scanner ........................................................................................................10

3.1.3 Upgrade firmware from User application..............................................................................................10

4. RUNNING DEMO APPLICATION ................................................................................................................... 11

5. SCOPE.......................................................................................................................................................... 11

6. OPERATION ................................................................................................................................................. 11

6.1 INDICATOR LEDS.............................................................................................................................................11

6.2 EJECT BUTTON................................................................................................................................................12

6.3 GUI .............................................................................................................................................................12

6.3.1 Small Image Preview Pane.....................................................................................................................13

6.3.2 Toolbar and controls ..............................................................................................................................14

6.3.3 Scan modes ............................................................................................................................................15

6.3.4 About dialog toolbar button ..................................................................................................................16

6.3.5 Status Bar...............................................................................................................................................16

6.3.6 Errors......................................................................................................................................................17

7. ARCHITECTURE ............................................................................................................................................ 18

8. M500 DEMO APP......................................................................................................................................... 19

8.1 FORMM500DEMO.CS .....................................................................................................................................19

8.2 FORMGUI.CS .................................................................................................................................................19

8.3 FORMUPDATE.CS ............................................................................................................................................19

8.4 MAGWND.CS.................................................................................................................................................19

8.5 USRIMAGE.CS ................................................................................................................................................19

8.6 ABOUTFORM.CS .............................................................................................................................................19

9. C# API.......................................................................................................................................................... 20

9.1 API FUNCTIONS..............................................................................................................................................20

9.2 API STRUCTURES ............................................................................................................................................24

10. MAINTENANCE ............................................................................................................................................ 27

10.1 CALIBRATION CARD .........................................................................................................................................27

10.2 AIR CLEANING ................................................................................................................................................28

10.3 MECHANICAL DRAWING...................................................................................................................................31

M500 USER MANUAL AND PROGRAMMER SDK

Page 3

M500 USER MANUAL AND PROGRAMMER SDK

Page 4

1. INTRODUCTION

Thank you for choosing this device.

This User’s Guide provides descriptions of the operating procedures and programming APIs for E-seek

Model M500 Authentication Unit. Carefully read this User’s Guide before using this device.

The actual screens that appear may be slightly different from the screen images used in this User’s Guide.

Model M500 Authentication Unit (ID Card Type) is hereafter referred to as “this device”

Manual Convention

Caution: This warns of a possibility of damage to this device.

Important: This indicates instructions that should be followed to ensure correct functionality and

efficiency of this device.

Note: This indicates an item of general importance.

Reminder: This indicates an item of relative importance.

Detail: This indicates an item of specific importance.

Restrictions

Unauthorized use or reproduction of this User’s Guide, whether in its entirety or in part, is strictly

prohibited.

The information contained in this User’s Guide is subject to change without notice.

1.1 PRODUCT FEATURE

This device is an ID card authentication system that performs user authentication by ID cards and supports

most ID cards.

1.2 PREREQUISITE

ID card compatible with this device must be prepared.

2. DEVICE DESCRIPTION

The E-Seek Model M500 Forensic Reader introduces a new performance standard for ID card reading and

authentication. It extracts hidden security features of a drivers' license, Military ID or any identity card for

authentication purposes in addition to reading and decoding the electronic information contained in the

barcode or magnetic stripe. Both sides of a scanned card are captured at 600 dpi resolution with a single

card insertion.

The Model M500 also incorporates a high performance PDF417 decoder and 3 Track magnetic readers. It

connects to a PC using a high speed USB 2.0 connection.

Ideal for Law Enforcement, Bars, Nightclubs, Casinos, and Access Control. The M500 can be used

anywhere your application requires reading and/or authenticating an ID or Drivers’ License.

M500 USER MANUAL AND PROGRAMMER SDK

Page 5

2.1 OVERVIEW OF MODEL M500

Figures, 1 and 2 illustrate the major modules and components of the M500.

Figure 1

Figure 2

M500 USER MANUAL AND PROGRAMMER SDK

Page 6

2.2 PRODUCT SPECIFICATION

Part Name

Description

Processor

Freescale ARM i.MX27

Memory

128 MB DDR SDRAM

1 MB Flash Memory

Scanning Method

CCD 24bit RGB Duplex 600 DPI with 1200 DPI option.

Barcode Reader

2D: PDF417 Linear: CODE 39 & CODE 128

Magnetic Reader

3 Track Magnetic Reader (ANSI, ISO, CDL, AAMVA)

External Interfaces

Power Jack (15 V DC 2.4A)

USB 2.0 Device Port

USB 2.0 extension Port

Indicator(s)

Speaker

Green LED for Power status

Blue and White center mounted LEDs under user control

Red LED for Error status

Communication

High Speed USB 2.0

Weight

M500 device: 4.25 lb (Without Power Supply)

Dimensions

8.5" Length x 5.7" Width x 4.8" Height

Regulatory

Complies with FCC & CE rules

Power Supply

Output 15V DC 2.4 A / Input 100-240V 50-60 Hz

2.3 TECHNICAL DETAILS

Dual Side Images in a Single Pass

UV, IR, RGB Images at same time

600DPI and with 1200 DPI option

24 bit Color, 8 bits IR & 24 bit UV image

Capture ROI Image (Region Of Interest)

CR80 Size (Driver License, ID-1)

Decode 2D (PDF417) & 1D

3 Tracks Magnetic Stripe Reader (ANSI, ISO, CDL, AAMVA)

USB 2.0 High speed

Easy Operation

Jam Free

Patented

M500 USER MANUAL AND PROGRAMMER SDK

Page 7

2.4 UNPACKING DEVICE

The M500 package includes:

M500 Device

Power Supply

USB Cable

Cleaning Card

Calibration Card

Power Supply

The AC/DC power supply

The power cord plugs into the power jack

Figure 3

2.4.1 USB CABLE

The M500 is provided with a USB interface cable. This cable allows the M500 to interface with standard

USB 2.0 or higher port on your computer.

Figure 4

M500 USER MANUAL AND PROGRAMMER SDK

Page 8

2.4.2 WHITE BALANCE CALIBRATION CARD

Figure 5

The calibration card is used to calibrate the white balance. Calibration could be required after shipping or

prolonged use. To perform the white balance calibration simply insert the card with the arrow side first.

After prolonged use or if the card becomes scratched it should be discarded.

2.4.3 CLEANING CARD

Figure 6

The cleaning card cleans the rollers and magnetic head. The need for cleaning varies but the general

guideline is once a month for high usage and once every three months for low usage. High usage is defined

as more than 3,000 scans per month.

M500 USER MANUAL AND PROGRAMMER SDK

Page 9

3. GETTING STARTED

1. Pre-Installing Driver

Download the driver from http://e-seek.com/products/m-500/

2. Log in to your computer as an administrator

Installing the 32 bit Driver (for Windows 32 bit XP, Vista, 7 and 8)

Run M500_USB_DRIVER-32.exe

Installing the 64 bit driver (for Windows 64 bit Vista, 7 and 8)

Run M500_USB_DRIVER-64.exe

WinDriver should appear under Jungo in Device Manager Window.

Figure 7

Next, connect M500 Power cable and then USB cable to your host PC.

Now the M500 should appears under Jungo in Device Manager Window.

Figure 8

Andere Handbücher für M500

Inhaltsverzeichnis

Andere E-Seek Kartenleser Handbücher

E-Seek

E-Seek M280 Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch