E2S D1*CP1-PS Series Bedienungsanleitung

D1xCP1-PS SERIES

EXPLOSION PROOF MANUAL PULL STATIONS

The D1xCP1-PS Series of Explosion Proof Manual Pull Stations is UL and FM listed for use in

hazardous environments, and for Nema Type 4X weatherproof applications. The unit also complies

with ADA standards when installed at less than 48 inches above the floor for front wheelchair access,

and less than 54 inches for side wheelchair access. All Installations must comply with local codes and

regulations.

Ratings: Listed By: UL, FM, CSFM, MEA

Enclosure: Class I, Groups B, C, and D. Class II, Groups E, F, and G. Class III.

NEMA 4X (Weatherproof), MARINE.

Contacts: D.P.D.T 10 Amps, 120 VAC

1 Amp, 30 VDC

Installation:

(Please refer to assembly diagram and installation notes on the back side)

The D1xCP1-PS model station includes a front housing, a back box, a switch plate, and all the

necessary hardware to assemble the station.

•Install the back box onto its mounting surface using the 4 holes provided on the mounting tabs. The

tabs are designed to accept a screw size of up to 1/4".

•The back box is supplied with two 3/4"-14 NPT conduit entries. Threaded joints between conduit and

back box must be made with a minimum of 5 threads fully engaged. Seal unused conduit entry with a

UL listed close-up plug for use in the hazardous locations listed above in the ratings section. Joint

sealing material may be used if it is a non-drying slushing compound, petroleum jelly or soap-thickened

mineral oil.

•Connect the field wiring to the terminal blocks on the adaptor plate. Use the insulated terminal lug

supplied to ground the box properly. Each wire or terminal lug must be placed under its corresponding

clamping plate for proper connection.

•Install the switch plate onto the back box using the 4 1/4-20x7/8 pan head screws provided. Make

sure that the o-ring seals on the screws and around the edge of the switch plate are properly seated.

•Open the front housing, align its mounting plate with the pins provided on the switch plate and attach

it using the two 6-32 screws provided into the slotted holes.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere E2S Sicherheitssystem Handbücher

E2S

E2S AlertAlight AL105NH Bedienungsanleitung

E2S

E2S D1xB2X05 Series Bedienungsanleitung

E2S

E2S IS-D105 Bedienungsanleitung

E2S

E2S D1xS2 Series Bedienungsanleitung

E2S

E2S BExBG10D-P Bedienungsanleitung

E2S

E2S D1 B2X05 Series Bedienungsanleitung

E2S

E2S D1xB2X05-S Bedienungsanleitung

E2S

E2S BExBG15D-P-SIL Bedienungsanleitung

E2S

E2S D1xS1 Series Bedienungsanleitung

E2S

E2S STExB2RT1 Bedienungsanleitung

E2S

E2S D1xC2 Series Bedienungsanleitung

E2S

E2S HA121 Bedienungsanleitung

E2S

E2S IS-CP4B-PT Bedienungsanleitung

E2S

E2S GNExCP6C-PT Bedienungsanleitung

E2S

E2S IS-mA1M Bedienungsanleitung

E2S

E2S GNExB2X05 Series Bedienungsanleitung

E2S

E2S STExB2X05DC012 Bedienungsanleitung

E2S

E2S D2xC2LD2 Series Bedienungsanleitung

E2S

E2S BExCP3C-PB Bedienungsanleitung

E2S

E2S D1xC3 Bedienungsanleitung

E2S

E2S D105AX Bedienungsanleitung

E2S

E2S D1xB2X Series Bedienungsanleitung

E2S

E2S D2xC2LD3 Bedienungsanleitung

E2S

E2S D2xC2LD2 Series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung