earth worth 1852 Bedienungsanleitung
2 - Assemble top and bottom sections of the tent frame as shown below.
Layout a square with poles C and D opposite each other and insert onto connectors A as shown.
Layout a square with poles E and F opposite each other and insert onto connectors B as shown.
3 - Connect the upper and lower tent frames to each other as shown, you may require assistance or need to lay
the frame halves on oor.
Tent
Tent Bottom
Grow Tent Assembly Instructions
Parts:
1 - Lay tent canvas at on oor
and unzip all zippers as shown.
Connector A x 4
Connector B x 4
Pole C x 2
Pole D x 2
Pole E x 2
Pole F x 2
Straight Support G x 1
Support Pole H x 2
TM 1852 EW-48x48x78 Mylar Hydro Shanty
C
C
D
D
A
A
A
A
E
F
BB
BB
C
C
D
D
A
A
A
A
E
E
F
FB
B
B
B
F
E
Copyright 2011 DTX International
www.earthworth.com
4 - Place assembled frame structure into the bottom panel of the tent as shown, then drape the canvas over
the structure from the back.
5 - Close the zippers from both sides to align the canvas to the frame.
6 - Open the zippers fully to install supports into the top portion of the inside of the tent.
G Straight support is to be installed from front to back, H supports span the width of the top.
Instructions - continued
Back
Front
Front
7 - Insert liner tray into the bottom of the tent fastening the ties around the connector poles.
8 - Assembly is now complete. Close zipper, make any small adjustments needed to ensure the best t on the
frame and your grow tent is ready to use!
Copyright 2011 DTX International
www.earthworth.com
Back
G
G
H
H
H
H
Inhaltsverzeichnis
Andere earth worth Zelt Handbücher
