Easy XLogic Bedienungsanleitung

Content

Introduction

Getting started



Installation and wiring



Programming xLogic

xLogic Functions

Configuring

Applications

Software



Technical data

Introduction

Congratulations with your xLogic SuperRelay provided by Easy Electronic Co., Ltd.

The xLogic SuperRelay is a compact and expandable CPU replacing mini PLCs, multiple timers,

relays and counters.

The xLogic SuperRelay perfectly fits in the space between timing relays and low-end PLCs. Each

CPU incorporates not only a real-time clock and calendar, but also provides support for optional

expansion I/O modules to enhance control and monitoring applications. Data adjustments can

easily be performed via the keypad, the LCD display, or through the easy-to-use xLogic soft.

DIN-rail and panel - mounted options are both are available, offering full flexibility to the various

installation needs of your application.

The xLogic SuperRelay is available in 120V/240V AC or 12V and 24V DC versions, making it the

ideal solution for relay replacement, or simple control applications as building and parking lot

lighting, managing automatic lighting, access control, watering systems, pump control,

ventilation systems, home automation and a wide field of other applications demanding low

cost to be a primary design issue.

We strongly recommended taking the time to read this manual, before putting the xLogic

SuperRelay to work. Installation, programming and use of the unit are detailed in this manual.

The feature-rich xLogic SuperRelay provides a for off-line operation mode, allowing full

configuration and testing prior to in-field service commissioning. In reviewing this manual you

will discover many additional advantageous product properties, it will greatly simplify and

optimize the use of your xLogic SuperRelay.

Valid

Valid range

range

range of

of this

this

this manual

manual

The manual applies to devices of ELC series modules . For more information about SMS module

or Ethernet module ,please refer to the SMS module or Ethernet module user's manual.

Safety

Safety Guideline

Guideline

This manual contains notices you have to observe in order to ensure your personal safety, as

well as to prevent damage to property. The notices referring to your personal safety are

highlighted in the manual by a safety alert symbol; notices referring to property damage only

have no safety alert symbol. The notices shown below are graded according to the degree of

danger .

Caution

Indicates

Indicates that

that

that death

death

death or

or severe

severe

severe personal

personal

personal injury

injury

injury may

may

may result

result

result if

if proper

proper

proper precautions

precautions

precautions are

are

are not

not

taken

Caution

With

With a

a safety

safety

safety alert

alert

alert symbol

symbol

symbol indicates

indicates

indicates that

that

that minor

minor

minor personal

personal

personal injury

injury

injury can

can

can result

result

result if

if proper

proper

precautions

precautions are

are

are not

not

not taken.

taken.

Caution

Without

Without a

a safety

safety

safety alert

alert

alert symbol

symbol

symbol indicates

indicates

indicates that

that

that property

property

property damage

damage

damage can

can

can result

result

result if

if proper

proper

precautions

precautions are

are

are not

not

not taken.

taken.

Attention

Indicates

Indicates that

that

that an

an unintended

unintended

unintended result

result

result or

or situation

situation

situation can

can

can occur

occur

occur if

if the

the

the corresponding

corresponding

notice

notice is

is not

not

not taken

taken

taken into

into

into account.

account.

If more than one degree of danger is present, the warning notice representing the highest

degree of danger will be used. A notice warning of injury to persons with a safety alert symbol

may also include a warning relating to property damage.

Qualified

Qualified Personnel

Personnel

The device/system may only be set up and used in conjunction with this documentation.

Commissioning and operation of a device/system may only be performed by qualified

personnel. Within the context of the safety notices in this documentation qualified persons are

defined as persons who are authorized to commission, ground and label devices, systems and

circuits in accordance with established safety practices and standards.

Prescribed

Prescribed Usage

Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog

or the technical description, and only in connection with devices or components from other

manufacturers which have been approved or recommended by

EASY.

Correct, reliable

operation of the product requires proper transport, storage, positioning and assembly as well

as careful operation and maintenance.

Trademarks

All names identified by xLogic are registered trademarks of the EASY . The remaining

trademarks in this publica tion may be trademarks whose use by third parties for their own

purposes could violate the rights of the owner .

Easy

Easy 2007

2007

2007 all

all

all rights

rights

rights reserved

reserved

The distribution and duplication of this document or the utilization and transmission of its

contents are not permitted without express written permission. Offenders will be liable for

damages. All rights, including rights created by patent grant or registration of a utility model

or design, are reserved.

Disclaim

Disclaim of

of Liability

Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and

software described. Since variance cannot be precluded

entirely,

we cannot guarantee full

consistency.

However ,

the information in this publication is re viewed regularly and any

necessary corrections are included in subsequent editions.

Additional

Additional support

support

We take pride in answering your question as soon as we can:

Please consult our website at www. xLogic -relay.com for your closest point of contact or email

us at sales@xlogic-relay.com

Contents

1. General

General

General Introduction

Introduction

Introduction to

to xLogic

xLogic

xLogic ……………………………………………………………………………………… 8

2. Installation/remove

Installation/remove

Installation/remove xLogic

xLogic

xLogic .. ……………………………………………………………………………………… 1 8

2.1 .1 DIN rail mounting …………………………………………………………………………………………………………… 1 8

2.1.2 Wall-mounting ………………………………………………………………………………………………………………… .19

2.1.3 Mouting ELC-HMI-FP ………………………………………………………………………………………………………… 21

2.2 Wiring the xLogic ……………………………………………………… …………………… …………………………………… 22

2.2.1 Connecting the power supply ………………………………………………………………………………… 23

2 . 2.2 Connecting xLogic inputs ……………………………………………………………………………………………… 23

2.2.3 Connecting xLogic outputs ………………………………………………………………………………………… 2 7

2.2.4 Communication port instructions …………………………………………………………………………… 30

3. Programming

Programming

Programming xLogic

xLogic

xLogic ……………………………………………………………………………… .. …………… 33

3.1 Connectors …………………………………………………………………………………………………………………………… .33

3.2 Blocks and block numbers ………………………………………………………………………………………………… .34

3.3 From circuit diagram to xLogic program …………………………………………………………………………… ..36

3.4 The four golden rules for operating xLogic ………………………………………………………………………… .37

3.5 Overview of xLogic menus ……………………………………………………………………………………… . ………… 38

3.6 Writing and starting the circuit program ………………………………………………………………………… ..38

3.6.1 Selecting programming mode ………………………………………………………………………………………… 38

3.6.2 The first circuit program ………………………………………………………………………………………………… .40

3.6.3 Circuit program input …………………………………………………………………………………………………… ..40

3.6.4 Assigning a circuit program name ………………………………………………………………………………… .43

3.6.5 Assigning system cover …………………………………………………………………………… . …………………… .44

3.6.6 Second circuit program ………………………………………………………… . ……………………………………… ..45

3.6.7 Deleting a block …………………………………………………………………………………………………… .. ………… 49

3.7 Memory space and circuit program size …………………………………………………………………………… .50

4 .

. xLogic

xLogic

xLogic functions

functions

functions ………………………………………………………………………………………… 51

4 .1 General Input & Output functions ………………………………………………………………………………… 51

4 .1.1 Inputs …………………………………………………………………………………………… .. …………………………… 52

4 .1.2 Cursor keys ………………………………………………………………………………………………………………………… 5 2

4 .1.3 Outputs ……………………………………………………………………………………………… . ……………………………… 52

4 .1.4 Permanent logical levels HI and LO …………………………………………………………………………………… 52

4 .1.5 Shift register bits …………………………………………………………………………………… .... ……………………… 5 2

4 .1.6 Analog inputs ………………………………………………………………………………… ... ……………………………… 52

4 .2

.2 Basic

Basic

Basic functions

functions

functions list

list

list –

–

– GF

GF ………………………………………………………………………………………………… 53

4 .2.1 AND …………………………………………………………………………………………………………………………………… 54

4 .2.2 AND with edge evaluation ……………………………………………………………………………………… . ………… 55

4 .2.3 NAND ……………………………………………………………………………………………………………………… . ………… 55

4 .2.4 NAND with edge evaluation …………………………………………………………………………… . ………………… 56

4 .2.5 OR ………………………………………………………………………………………………………… . …………………………… 57

4 .2.6 NOR …………………………………………………………………………………………………………… . ……………………… 58

4 .2.7 XOR ………………………………………………………………………………………………………………………… . ………… 58

4 .2.8

NOT

……………………………………………………………………………………………………………………… .. …………… 59

4 .3

.3 Basics

Basics

Basics on

on special

special

special functions

functions

functions ……………………………………………………………………………………… .. … 59

4 .3.1 Designation of the inputs …………………………………………………………………………………… . …………… 59

4 .3.2 Time response ………………………………………………………………………………………………………… . ……… .60

4 .3.3 Backup of the real-time clock …………………………………………………………… ………………… ………… . 61

4 .3.4 Retentivity ……………… . ………………………………………… .. ………………… …………………………… ………… 61

4 .3.5 Parameter protection ………………………………………… .. …………………………………………………………… 61

4 .3.6 Calculating the gain and offset of analog values ……………………… . …………………… . ……………… 61

4 .4

.4 Special

Special

Special functions

functions

functions list

list

list –

–

– SF

SF …………………………………………………………………… .. ………… . ………… . 63

4 .4.1 On-delay ……………………………………………………………………………………………… . ………………… 66

4 .4.2 Off-delay …………………………………………………………………………………………………………………………… 6 8

4 .4.3 On-/Off-delay ……………………………………………………………………………………………………………… 6 9

4 .4.4 Retentive on-delay …………………………………………………………………………………… . ……………………… 71

4 .4.5 Wiping relay (pulse output) …………………………………………………………………………………………… 72

4 .4.6 Edge triggered wiping relay ……………………………………………………………………………………………… 73

4 .4.7 Asynchronous pulse generator …………………………………………………………………………… . …………… 75

4 .4.8 Random generator ………………………………………………………………………………………………………… 76

4 .4.9 Stairway lighting switch …………………………………………………………………………………………………… 77

4 .4.10 Multiple function switch ………………………………………………………………………………………………… . 79

4 .4.11 Weekly timer …………………………………………………………………………………………………………………… 80

4 .4.12 Yearly timer ……………………………………………………………………………………………… . …………………… 83

4 .4.13 Up/down counter ……………………………………………………………………………………………………… 89

4 .4.14 Hours counter ………………………………………………………………………………………………………………… .90

4 .4.15 Threshold trigger ………………………………………………………………………………………………… . ……… ..93

4 .4.16 Latching relay ……………………………………………………………………………………………………………… . … 94

4 .4.17 Pulse relay …………………………………………………………………………………………………………………… 95

4 .4.18 Message text …………………………………………………………………………………………………………………… 96

4 .4.19 Softkey …………………………………………………………………………………………………………………………… 105

4 .4.20 Shift register ………………………………………………………………………………………………………………… 107

4 .4.21 Analog comparator ……………………………………………………………………………………………… . ……… 109

4 .4.22 Analog threshold trigger ……………………………………………………………………………………………… 112

4 .4.23 Analog amplifier …………………………………………………………………………………………………………… 114

4 .4.24 Analog value monitoring ………………………………………………………………………… . ………………… 116

4 .4.25 Analog differential trigger …………………………………………………………………………………… 118

4 .4.26 Analog multiplexer ………………………………………………………………………………… . …………………… . 120

4 .5 HMI block ………………………………………………………………………………………………………………… .. ……… 122

4 .5.1 System

cover

…………………………………………………………………………………………………………………… 122

4 .5.2 System input/output …………………………………………………………………………………………… . ………… 123

4.6 PWM ……………………………………………………………………………………………… . …………………………… . ……… 124

4.7 Analog Ramp ………………………………………………………………………………… .. ………… . ……………………… 127

4.8 Analog Math ………………………………………………………………………………… .. ………………………… ... ……… 129

4.9 Analog math error detection ……………………………………………………………… . …… . ……………………… ..131

4.10 F （digital flag ）…………………………………………………………………………………………………………………… 132

4.11 AF （analog flag ）………………………………………………………………………………………………………………… 133

4.12 Modbus Read ………………………………………………………………………………………………… . ………………… 133

4.13 Modbus Write …………………………………………………………………………………………… . ……………………… 139

4.14 Data latching

relay

…………………………………………………………………… .. ……………………………………… 143

4.15 PI

Controller

…………………………………………………………… .. … .. …………………………………………………… 145

4.16 Memory Write ………………………………………………………………………………………………… . ………………… 154

4.17 Memory Read ……………………………………………………………………………………………………… . …………… 159

5 .

. Configuring

Configuring

Configuring xLogic

xLogic

xLogic ………………………………………………………………… .. ……………………………… 162

5 .1 Instruction of xLogic-HMI ………………………………………………………………………… . …………… 163

5 .2 Select function page …………………………………………………………………………………………… ... …………… 163

5 .2.1 Run/Stop ………………………………………………………………………………………………………… . ……………… 164

5 .2.2 Set parameter ………………………………………………………………………………………………………………… 165

5 .2.3 Set password …………………………………………………………………………………………………………………… 167

5 .2.4 Set Address of expansion module ………………………………………………………………………………… 170

5.2.5 Set Address of CPU module ……………………………………………………………………………………… . …… .173

5.2.6 Set backlight ………………………………………………………………………………………………………………… . … 173

5.2.7 Set baud rate of CPU ……………………………………………………………………………………………………… 174

5 .2. 8 Modification Methods of System Time ………………………………………………………………………… .. … 175

6 .Application

.Application

.Application ………………………………………………………………………………………………………………………… .177

6 .1 Dual-function switch ………………………………… . …………………………………………………………………… .177

6 .1.1 Standard solution …………………………………………………………………………………………………………… .178

6 .1.2 The scheme of xLogic ……………………………………………………………………………………………………… .180

6 .2 Automatic gate ………………………………………………………………………………………………………………… ..181

6 .2.1 Standard solution …………………………………………………………………………………… .. ………………… ..181

6 .2.2 The scheme of xLogic ……………………………………………………………………………………………………… 181

6 .3 Ventilation system ………………………………………………… . …………………………………………………………… 183

6. 3.1 Standard solution …………………………………………………………………………………………………………… 183

6 .3.2 The scheme of xLogic ……………………………………………………………………………………………………… 184

6 .4 Factory

door

………………………… . ……………………………………………………………………………………………… 185

6 .4.1 Standard solution ……………………………………………………………………………………………………………… 186

6 .4.2 The scheme of xLogic ……………………………………………………………………………………………………… 186

6 .5 Daylight lamp system ……………………………………………………………………………………………………… .187

6 .5.1 Standard solution ………………………………………………………………………………………………… .. ……… 188

6 .5.2 The scheme of xLogic ……………………………………………………………………………………………………… 188

6 .6 Rainwater pump …………………………………………………………………………………………………………………… 189

6 .6.1 Standard solution …………………………………………………………………………………………………………… 190

6 .6.2 The scheme of xLogic ……………………………………………………………………………………………………… 1 91

7 .

. xLogic

xLogic

xLogic Software

Software

Software ………………… .. …………………… . ………………………………………………… . ………………… 1 92

7 .1Connecting

.1Connecting

.1Connecting the

the

the xLogic

xLogic

xLogic to

to a

a PC

PC …………………………… …………………………… ………………………… 211

Appendix

A Technical data ……………………………………………………………………………………………………………… . ………… 212

A.1 General technical data ………………………………………………………………………………………………………… 212

A.2 Technical data: xLogic (ELC series) ………………………………………………… . ……………………………… .21 3

A.3 Relay switch life ………………… .. …………………………………………………………………………………………… . 2 22

C hapter

hapter

hapter 1

1 General

General

General Introduction

Introduction

Introduction to

to xLogic

xLogic

Overview

xLogic SuperRelay is a universal logic module made by Easy.

xLogic SuperRelay, a compact, expandable CPU that can replace mini PLC, multiple timers,

relays and counters, Splitting the difference between a timing relay and a low-end PLC, Each

CPU houses a real-time clock and calendar , and supports optional expansion I/O modules to

enhance your control and monitoring applications . Data adjustments can be done via the

on-board keypad and LCD display, or with xLogic soft. It can be either DIN-rail or panel

mounted, depending upon the needs of your application, and it is available in 120V/240V ac as

well as 12V and 24V dc versions, and it is the ideal solution for relay replacement applications,

simple control applications such as building and parking lot lighting, managing automatic

lighting, access control, watering systems, pump control, or ventilation systems in factory, and

home automation and applications in which cost is a primary design issue.

Highligh

Highligh t

t features:

features:



4-lines, 10-character per line, backlight display.

Multiple value display and input via keypad and LCD display.



Keypanel programming feature ( optional )



Function Block Diagram



Standard Modbus RTU /ASCII communication protocol supported.



’

s optional for xLogic to act as slave or master in certain Modbus RTU communication

network.



CAN BUS protocol based expansion modules

Expandable up to 9 linked IO expansion modules reaching 162 I/O points in maximum



1 RS232 port and 2 RS485 port s built-in (merely applied to standard ELC-12 Series ) ; 1

RS232 port and 1 RS485 port built-in (merely applied to ELC-18 Series )



Optional Ethernet connectivity



SMS /GSM module for remote control, monitoring and alarm

Multiple channels analog inputs available with DC 0-10V signal ,PT100 signal& 0/4 … .20mA.



Default Real Time Clock (RTC)

Backup at Real Time Clock (RTC) at 25 ° C :72 hours(ELC-6&economy ELC-12);100

hours(Standard ELC-12&Upgraded ELC-18)

Two channel s high-speed counting (ELC-18 Series CPU :14KHz; Upgraded

ELC-18&ELC-12 Series CPU:60KHz )



Pre-configured standard functions, e.g. on/ off-delays, pulse relay and softkey

2 PWM channels (333Hz)

Retentive memory capability (Not applied to ELC-6&economic ELC-12)

RS232 communication download cable with photo-electricity isolation

USB communication download cable with photo-electricity isolation

Programmable capability up to 256 function blocks(ELC-18) ,512 function blocks(ELC-1 2 )

Mounting via modular 35mm DIN rail or screw fixed mounting plate

On-line monitor capability

Compact design

HMI(LCD) separate installation available,e.g. xLogic can be installed inside cabinet and HMI

mounted in it

’

s front panel

Datalogging



Low cost

Inhaltsverzeichnis

Andere Easy Steuereinheit Handbücher

Easy

Easy ELC12 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

Easy xLogic Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken