EasyRAID Q16PS-S3R3 Gebrauchsanweisung

easyRAID Q16PS-S3R3

Hardware User Manual

SAS Channel to SAS

Disk Array System

Version 1.0

easyRAID Q16PS-S3R3

SAS Channel to SAS

Disk Array System

Hardware User Manual

Table of Contents

Preface................................................................................................................... i

Chapter 1 System Requirements

Operating Environment ....................................................................................1

Host Interface-SAS Channel ............................................................................1

Hard Disk Interface-Serial Attached SCSI ........................................................1

VT100 Terminal Settings ..................................................................................2

Ethernet settings ...............................................................................................2

Chapter 2 Basic Configuration

Unpacking .............................................................................................................3

Components ..........................................................................................................4

Closed Front Panel ...........................................................................................4

Open Front Panel .............................................................................................5

Disk Tray ..........................................................................................................6

easyRAID Q16PS-S3R3 Rear View .................................................................7

Installing Disks ......................................................................................................8

Making Connections ...........................................................................................10

Connecting the Host Interface ........................................................................10

Connecting the GUI management port ...........................................................11

Connecting the JBOD enclosure ....................................................................11

Connecting and Turning on the Power ........................................................... 12

Mounting in a Rack .............................................................................................13

Installing the Rail Extenders ...........................................................................14

Chapter 3 Maintenance

Replacing a Disk ................................................................................................. 15

Replacing a Power Supply .................................................................................. 16

Upgrading Memory ............................................................................................. 18

Appendix

Hardware Specifications ..................................................................................... 19

Preface

About this Manual

This manual is designed to make the disk array system as easy to use as possible.

Information contained in this document has been checked for accuracy, but no guaran-

tee is given that the contents are correct. Information and specifications are subject to

change without notice.

tion. No part of this documentation may be reproduced in any form by any means with-

out prior written authorization the company and its licensors, if any.

Conventions

Caution

This symbol is used to remind users to pay attention to important

descriptions regarding usage and maintenance (repair) or additional

important information related to this disk array system.

Note

This symbol is used to remind users of useful information that can make

procedures such as configuration easier to accomplish.

easyRAID Q16PS-S3R3 SAS Disk Array Systems

Preface – Important Safety Instructions, Care and Handling

Important Safety Instructions, Care and Handling

Before starting, take a few minutes to read this manual.

Read all of these instructions and save this manual for

later reference.

Protect the disk array system from extremely high or low

temperatures. Let the disk array system warm (or cool)

to room temperature before using it.

Protect the disk array system from being bumped or

dropped. Do not place the disk array system on an

unstable cart, stand, or table. It may fall, causing serious

damage to the product.

Keep the disk array system away from magnetic forces.

Do not use the disk array system near water.

Keep the disk array system away from dust, sand, or dirt.

Gaps and openings in the cabinet are provided for venti-

lation. Never block or cover these openings, because

the disk array system may overheat and become unreli-

able. Don’t place the disk array system on a bed, sofa,

rug, or other similar surface.

Do not place the disk array system near or over a radia-

tor or other heat source.

Refer to the rating plate for the correct voltage and

ensure that the appliance voltage corresponds to the

supply voltage.

easyRAID Q16PS-S3R3 SAS Disk Array Systems

iii

Preface – Important Safety Instructions, Care and Handling

The appliance must be grounded. The disk array system

is equipped with a 3-wire grounded type of power cord.

This power cord will only fit into a grounded type of

power outlet.

If an extension cord or a power center is used with the

disk array system, make sure that the total current con-

sumption of all products plugged into the wall outlet

does not exceed the ampere rating.

Do not place the disk array system where the cord will

be walked on.

Never push any kind of object into the disk array system

through cabinet gaps and openings, since they may

touch dangerous voltage points and cause a risk of fire

or electric shock.

Unplug the power cord from the wall outlet before clean-

ing. Keep the disk array system dry. Do not use liquid

cleaners, aerosol cleaners, or a wet cloth. Use a damp

cloth for cleaning.

Except as specifically explained in this User Manual, do

not attempt to service the disk array system by yourself.

Opening or removing the covers may expose you to

dangerous voltages.

Unplug this product from the wall outlet and refer servic-

ing to qualified service personnel under the following

conditions.

• If the disk array system has been exposed to

water or any liquid.

• If the disk array system has been dropped or the

cabinet damaged.

Users should not remove the cover.

Disconnect all power supply cords before servicing.

Fan1

Power1

oGGwGGY

easyRAID Q16PS-S3R3 SAS Disk Array Systems

Preface – Important Safety Instructions, Care and Handling

Placement Notes

• The disk array system LCD panel can be damaged by exposure to

direct sunlight. Limit exposure to subdued or indirect sunlight only.

• The disk array system should be used only in clean environments

that are free from airborne contaminants such as dust, dirt, and

smoke. Excessive moisture or oil particles in the air can also hinder

disk array system performance.

• To reduce the possibility of data errors caused by electromagnetic

interference, locate the disk array system at least five feet away

from electrical appliances and equipment that generates magnetic

fields.

Power Supply Safety Notes

• To avoid electric shocks, do not use an extended power cord or an

outlet that does not match the disk array system plug or leaves the

plug exposed.

• The disk array system has a 3-wire grounded plug. The third pin

connects to ground; do not remove it.

• If the power cord or plug is damaged or worn, unplug it immediately

and contact a qualified service technician for maintenance.

• To avoid fire or electric shocks, do not overload electric power out-

lets.

Inhaltsverzeichnis

Andere easyRAID Disk-Array-System Handbücher

easyRAID

easyRAID S8A2-PER2 Gebrauchsanweisung

easyRAID

easyRAID ERP12R-8FR2 Bedienungsanleitung

easyRAID

easyRAID S16-F2R4 Gebrauchsanweisung

easyRAID

easyRAID Q12-U4R2 Gebrauchsanweisung

easyRAID

easyRAID X12P F2R4 Bedienungsanleitung

easyRAID

easyRAID S4-FWTT Bedienungsanleitung

easyRAID

easyRAID Q16Q-2GR3 Gebrauchsanweisung

easyRAID

easyRAID X6P U3R2 Bedienungsanleitung

easyRAID

easyRAID S8-U4TT Gebrauchsanweisung

easyRAID

easyRAID Q12QS-4GR2 Gebrauchsanweisung

easyRAID

easyRAID Q08QA-2GR2 Bedienungsanleitung

easyRAID

easyRAID F8P U3R4 Bedienungsanleitung

easyRAID

easyRAID Q12PS-F4R2 Gebrauchsanweisung

easyRAID

easyRAID S4-ESTT Bedienungsanleitung

easyRAID

easyRAID Q16PS-F4R3 Gebrauchsanweisung

easyRAID

easyRAID Q16QS-4GR3 Gebrauchsanweisung

easyRAID

easyRAID Q12P2-F4R2 Gebrauchsanweisung

easyRAID

easyRAID F8P U3TT Bedienungsanleitung

easyRAID

easyRAID S8A2-PETT Gebrauchsanweisung

easyRAID

easyRAID ERQ12+U4R2 Gebrauchsanweisung

easyRAID

easyRAID ERQ16-U4R3 Bedienungsanleitung

Beliebte Disk-Array-System Handbücher anderer Marken

Fujitsu

Fujitsu ETERNUS DX60 S2 Bedienungsanleitung

Accom

Accom WSD/2XTREME Bedienungsanleitung

HP Compaq Presario,Presario 4400 Gebrauchsanweisung

ATTO Technology

ATTO Technology Diamond Storage Array V-Class Bedienungsanleitung

National Instruments

National Instruments RMX-8268 Bedienungsanleitung

Overland Tandberg

Overland Tandberg SnapServer DX1 Bedienungsanleitung

NEC

NEC NF2300-SR412E Bedienungsanleitung

EMC

EMC iomega StorCenter px12-350r Bedienungsanleitung

Infortrend

Infortrend EonStor A08U-C2411 Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik M-F3 Bedienungsanleitung

Buffalo

Buffalo HD-QHU3R5 Bedienungsanleitung

HP StorageWorks XP128 Bedienungsanleitung

Addonics Technologies

Addonics Technologies Z4SN25NML Bedienungsanleitung

HP StorageWorks P2000 Leitfaden

HP 4400 Enterprise Bedienungsanleitung

G-Technology

G-Technology G-RAID2 Bedienungsanleitung

HP STORAGEWORKS XP24000 Bedienungsanleitung

Bosch

Bosch DVA-16K SCSI Bedienungsanleitung

easyRAID Q16PS-S3R3 Gebrauchsanweisung

Beliebte Disk-Array-System Handbücher anderer Marken